Migrate Squid.conf from Linux to Pfsense 2.2.6

KOM

Try putting them in Custom ACLS (Before Auth).

vallum

Try putting them in Custom ACLS (Before Auth).

Hey ,

my Integration :-
http_port 192.168.1.200:3128;url_rewrite_program /usr/pbi/squidguard-amd64/bin/squidGuard -c /usr/pbi/squidguard-amd64/etc/squidGuard/squidGuard.conf;url_rewrite_bypass off;url_rewrite_children 300 startup=200 idle=100 concurrency=0

And

Custom ACL before Auth:-

acl bypass_domains dstdomain .office365.com ;always_direct allow bypass_domains;redirector_access deny bypass_domains

Now, whenever i restart squidguard

url_rewrite_children 300 startup=200 idle=100 concurrency=0 changes to

url_rewrite_children 16 startup=8 idle=4 concurrency=0 (default values)

Am i missing anything?

Thanks

KOM

When you make your changes to squidguard, are you going back to the General settings page and clicking Save then Apply?

vallum

@KOM:

When you make your changes to squidguard, are you going back to the General settings page and clicking Save then Apply?

Hey

Yes I'm doing this way only , is it OK ?

I have various Group ACL and target categories for whitelist/blacklist, (after adding any rule )which only seems to work by doing the above mentioned procedure ,

Thanks.

KOM

Any change you make to any of the squidGuard tabs, you must go back to General settings and click save then Apply. Always.

vallum

@KOM:

Any change you make to any of the squidGuard tabs, you must go back to General settings and click save then Apply. Always.

Yes I'm doing this way only .

But After doing the same . My configured values i.e
url_rewrite_children 300 startup=200 idle=100 concurrency=0

is getting deleted and replaced by :-
url_rewrite_children 16 startup=8 idle=4 concurrency=0

This is really painful . any idea how we can solve this .

KOM

Perhaps your numbers are too big and are being reset to defaults? Do you really need 300 rewriter threads? I just changed mine from the default 16/8/4 to 20/10/5 and it sticks.

vallum

@KOM:

Perhaps your numbers are too big and are being reset to defaults? Do you really need 300 rewriter threads? I just changed mine from the default 16/8/4 to 20/10/5 and it sticks.

Hey ,

I have around 2000 users using proxy so i need to increase this value .
I have tested and no matter what values i set .
It always sets as default whenever squid-guard is restarted .

KOM

What do you mean, 'squidguard is restarted'? squidguard is not a service. It's a helper app that is spawned by squid for every URL to be processed. The thing you're having trouble with is squid not saving this setting. It should have nothing to do with squidguard.

vallum

@KOM:

What do you mean, 'squidguard is restarted'? squidguard is not a service. It's a helper app that is spawned by squid for every URL to be processed. The thing you're having trouble with is squid not saving this setting. It should have nothing to do with squidguard.

Ok , So can i change this default value , let just say instead of 16 8 4 , i want to set custom values directly on configuration file , from squid reads it .

KOM

You should be able to change it right for the Integrations field just like I did. Save it and it should stick.

vallum

@KOM:

You should be able to change it right for the Integrations field just like I did. Save it and it should stick.

Hey Kom,

But in my case it is not sticking . so what i would like to know is that , there must be some file where it is hard-coded that default values are 16 8 4 .

So in my case squid keeps resetting to default values after squidGuard is SAVE + APPLY via general Settings .

So the default values 16 8 4 , if we can change it to custom value not from GUI .

KOM

No idea where that config might hlive, but it will be overwritten at every pfSense upgrade so that's not really the best solution.

vallum

@KOM:

No idea where that config might hlive, but it will be overwritten at every pfSense upgrade so that's not really the best solution.

Hey Kom,

Thanks .

For now i have done changes in /usr/local/pkg/squidguard_configurator.inc

now the value is permanent after, Save + Apply.