Squid обновление до версии 3.5.14
-
Подскажите можно ли обновить squid до версии 3.5
pfSense
2.2.6-RELEASE (amd64)
built on Mon Dec 21 14:50:08 CST 2015
FreeBSD 10.1-RELEASE-p25Делал по следующей инструкции не взлето, к большому сожалению.
Причина в необходимости фильтрации трафика HTTPS.http://hubpages.com/technology/Intercepting-HTTPS-Traffic-Using-the-Squid-Proxy-in-pfSense
Upgrading to Squid 3.5.3The upgrade instructions are slightly different depending on whether you are running the 32-bit or 64-bit version of pfSense.
To determine which version you have open the pfSense dashboard and check the version section of the system information dashboard widget. If you see AMD64 then follow the 64-bit instructions. If you see i386, then use the 32-bit instructions.
The commands can be run through an SSH terminal, or the web based terminal (Diagnostics \ Command Prompt)
64-Bit (AMD64) Instructions
Download the PBI by running the command: fetch https://files.pfsense.org/packages/10/All/squid-3.5.3-amd64.pbi
Install the package by running: pbi_add –no-checksig -f squid-3.5.3-amd64.pbi
Run the commands below to create the correct directory structure
cd /usr/pbi/squid-amd64/
rm -rf /usr/pbi/squid-amd64/etc
ln -s /usr/pbi/squid-amd64/local/etc .
ln -s /usr/pbi/squid-amd64/local/lib .
ln -s /usr/pbi/squid-amd64/local/libexec .
ln -s /usr/pbi/squid-amd64/local/share .
ln -s /usr/pbi/squid-amd64/bin sbinReboot pfSense after running the above commands (Diagnostics \ Reboot).
После этих действий squid не нашел conf фалов судя по логам.
Где-то на форму читал что после обновления бинарных файлов необходимо еще обновить конфигурационные но так и не нашел где их взять.
Может кто обновлялся до последней версии squid судя по статье в версии 3.4The pfSense package manager currently contains Squid version 3.4 which has a known issue where it incorrectly generates SHA1 certificates instead of SHA256.
возможно ли обновить или ждать официального релиза.
-
Доброе.
Крайне актуальная тема (для меня). Если все же у Вас получится - просьба отписаться.
За ссылку - спасибо.P.s. Покажите логи сквида после перезагрузки.
-
Вот логи
Mar 20 21:59:44 php-fpm[79033]: /pkg_edit.php: [squid] Template not found; could not generate '/usr/pbi/squid-i386/local/etc/c-icap/squidclamav.conf' file!
Mar 20 21:59:44 php-fpm[79033]: /pkg_edit.php: [squid] Template not found; could not generate '/usr/pbi/squid-i386/local/etc/c-icap/c-icap.conf' file!
Mar 20 21:59:44 php-fpm[79033]: /pkg_edit.php: [squid] Template not found; could not save '/usr/pbi/squid-i386/local/etc/c-icap/c-icap.magic' file!
Mar 20 21:59:44 php-fpm[79033]: /pkg_edit.php: [squid] Template not found; could not generate '/usr/pbi/squid-i386/local/etc/freshclam.conf' file!
Mar 20 21:59:44 php-fpm[79033]: /pkg_edit.php: [squid] Template not found; could not generate '/usr/pbi/squid-i386/local/etc/clamd.conf' file!Это логи сам сервис squid вроде как работает.
-
Подскажите можно ли обновить squid до версии 3.5
pfSense
2.2.6-RELEASE (amd64)
built on Mon Dec 21 14:50:08 CST 2015
FreeBSD 10.1-RELEASE-p25Делал по следующей инструкции не взлето, к большому сожалению.
Причина в необходимости фильтрации трафика HTTPS.http://hubpages.com/technology/Intercepting-HTTPS-Traffic-Using-the-Squid-Proxy-in-pfSense
Upgrading to Squid 3.5.3The upgrade instructions are slightly different depending on whether you are running the 32-bit or 64-bit version of pfSense.
To determine which version you have open the pfSense dashboard and check the version section of the system information dashboard widget. If you see AMD64 then follow the 64-bit instructions. If you see i386, then use the 32-bit instructions.
The commands can be run through an SSH terminal, or the web based terminal (Diagnostics \ Command Prompt)
64-Bit (AMD64) Instructions
Download the PBI by running the command: fetch https://files.pfsense.org/packages/10/All/squid-3.5.3-amd64.pbi
Install the package by running: pbi_add –no-checksig -f squid-3.5.3-amd64.pbi
Run the commands below to create the correct directory structure
cd /usr/pbi/squid-amd64/
rm -rf /usr/pbi/squid-amd64/etc
ln -s /usr/pbi/squid-amd64/local/etc .
ln -s /usr/pbi/squid-amd64/local/lib .
ln -s /usr/pbi/squid-amd64/local/libexec .
ln -s /usr/pbi/squid-amd64/local/share .
ln -s /usr/pbi/squid-amd64/bin sbinReboot pfSense after running the above commands (Diagnostics \ Reboot).
После этих действий squid не нашел conf фалов судя по логам.
Где-то на форму читал что после обновления бинарных файлов необходимо еще обновить конфигурационные но так и не нашел где их взять.
Может кто обновлялся до последней версии squid судя по статье в версии 3.4The pfSense package manager currently contains Squid version 3.4 which has a known issue where it incorrectly generates SHA1 certificates instead of SHA256.
возможно ли обновить или ждать официального релиза.
в принципе подобная тема уже обсуждалась. https://forum.pfsense.org/index.php?topic=100066.0
В рэдмайн разработчиков ничего про добавление новой версии squid я не видел.