Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfBlockerNG v2.0 w/DNSBL

    Scheduled Pinned Locked Moved pfBlockerNG
    1.1k Posts 192 Posters 1.7m Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • K
      killmasta93
      last edited by

      Hi,

      same situation in my environment. I changes from HTTPS WebUI to HTTP because WPAD is hosted on pfsense itself. But i defined all private IPs to go DIRECT and not using the proxy in the WPAD files. But unfortunately it does not work.

      Further I disabled auto proxy configuration and hardcoded the proxy in my browser but DNSBL still does only work with HTTP (pfsense WebUI page) but not with HTTPS. Further it does not log anything :-(

      PS:
      Anybody here who could suggest a good DNSBL which focuses on command and control server and such stuff?

      hmm…are you getting the gif? does it log the gif? are you sure you disabled the WPAD?

      Tutorials:

      https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

      1 Reply Last reply Reply Quote 0
      • N
        Nachtfalke
        last edited by

        @killmasta93:

        Hi,

        same situation in my environment. I changes from HTTPS WebUI to HTTP because WPAD is hosted on pfsense itself. But i defined all private IPs to go DIRECT and not using the proxy in the WPAD files. But unfortunately it does not work.

        Further I disabled auto proxy configuration and hardcoded the proxy in my browser but DNSBL still does only work with HTTP (pfsense WebUI page) but not with HTTPS. Further it does not log anything :-(

        PS:
        Anybody here who could suggest a good DNSBL which focuses on command and control server and such stuff?

        hmm…are you getting the gif? does it log the gif? are you sure you disabled the WPAD?

        Hi killmasta93,

        yes, as I said above DNSBL only works for HTTP butw not for HTTPS. Further it only shows me the WebUI (HTTP) but it does not log anything.
        I am pretty sure that I disabled WPAD. I disabled the "Automatic discovery" option in chrome and IE (both browsers use the same proxy config menue) and then I closed my browsers and opened them again. At least I disbaled my network adapter and enabled it again to make sure that I am getting new information from DHCP and DNS.

        So when I try to access the internet I still have to go through the proxy for http and https. I am NOT using TRANSPARENT proxy. Further I allowed port 8443 as an allowed port for squid SSL.

        So the behavour is strange that it differs from yours even if it seems we have the same configuration.

        1 Reply Last reply Reply Quote 0
        • K
          killmasta93
          last edited by

          Hi Nachtfalke,

          So I have been trying to get it work and nothing, But this is what got my eye. I did a fresh install pfSense 2.2.4 installed the lasted pfBlockerNG and nothing wont log either the ads BUT it blocks them somehow. The GIF is the only alert that shows. Im thinking since i Have updated to the newest pfBlocker this is what happened. I also check on another pfSense box that was running pfBlocker 1.0 i updated also to the newest  and wont work either. That box does no have any packages besides pfBlocker

          Tutorials:

          https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

          1 Reply Last reply Reply Quote 0
          • BBcan177B
            BBcan177 Moderator
            last edited by

            @BBcan177:

            I have posted  PR #1243, pfBlockerNG v2.0.5 (for pfSense v2.2.x)
              and
            I have also posted PR #87, pfBlockerNG v2.0.8 (for pfSense v2.3)

            Changelog can be seen in the attached links. If you have any issues, post back in the forum.

            I highly recommend installing pfSense 2.3. Its nearing Release Candidate (RC) and is really looking sharp. Its getting harder to maintain pfBlockerNG in two different platforms, so I may concentrate my future efforts in pfSense 2.3. So it will most likely see all of the new upcoming features. I will however maintain pfBlockerNG in 2.2.x that are bug fixes.

            Thanks!

            Both PR #1243 and #87 have been merged for pfSense 2.2.x and 2.3.x respectively.

            You can click on the PR links above to review the changes. Any questions, please let me know…

            Looking forward to your feedback and hope you guys checkout pfSense 2.3 !!!

            "Experience is something you don't get until just after you need it."

            Website: http://pfBlockerNG.com
            Twitter: @BBcan177  #pfBlockerNG
            Reddit: https://www.reddit.com/r/pfBlockerNG/new/

            1 Reply Last reply Reply Quote 0
            • W
              Wolf666
              last edited by

              On 2.3 beta since the beginning, pfBlockerNG is working pretty fine, grazie for your work BBcan177!

              Modem Draytek Vigor 130
              pfSense 2.4 Supermicro A1SRi-2558 - 8GB ECC RAM - Intel S3500 SSD 80GB - M350 Case
              Switch Cisco SG350-10
              AP Netgear R7000 (Stock FW)
              HTPC Intel NUC5i3RYH
              NAS Synology DS1515+
              NAS Synology DS213+

              1 Reply Last reply Reply Quote 0
              • F
                Fesoj
                last edited by

                Hi!

                I read the info about 2.3 and I shall update asap. For the time being I'd like to update to 2.0.5 on an older 2.2. box. The installation aborted with the message

                Downloading https://files.pfsense.org/packages/10/All/pfblockerng-1.6.6-amd64.pbi ...  could not download from there
                

                It seems that the .pbi file is missing.  Did someone else run into the same problem?

                1 Reply Last reply Reply Quote 0
                • BBcan177B
                  BBcan177 Moderator
                  last edited by

                  @Fesoj:

                  Hi!

                  I read the info about 2.3 and I shall update asap. For the time being I'd like to update to 2.0.5 on an older 2.2. box. The installation aborted with the message

                  Downloading https://files.pfsense.org/packages/10/All/pfblockerng-1.6.6-amd64.pbi ...  could not download from there
                  

                  It seems that the .pbi file is missing.  Did someone else run into the same problem?

                  I can download the file from the shell without issue:

                  fetch -o /tmp/pfblockerng-1.6.6-amd64.pbi https://files.pfsense.org/packages/10/All/pfblockerng-1.6.6-amd64.pbi
                  

                  "Experience is something you don't get until just after you need it."

                  Website: http://pfBlockerNG.com
                  Twitter: @BBcan177  #pfBlockerNG
                  Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                  1 Reply Last reply Reply Quote 0
                  • F
                    Fesoj
                    last edited by

                    This time the file was found.

                    1 Reply Last reply Reply Quote 0
                    • A
                      adx442
                      last edited by

                      Haven't had issues with pfBlockerNG on 2.2.x, but I've upgraded to 2.3RC (and I've tried uninstalling/reinstalling pfB), but I get this error and a pfSense crash report every time I click the Alerts tab under pfBlockerNG's section:

                      Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 72 bytes) in /usr/local/www/pfblockerng/pfblockerng_alerts.php on line 581 Call Stack: 0.0141 232168 1. {main}() /usr/local/www/pfblockerng/pfblockerng_alerts.php:0 1.4219 2882400 2. conv_log_filter_lite() /usr/local/www/pfblockerng/pfblockerng_alerts.php:362 1.4220 2883016 3. exec() /usr/local/www/pfblockerng/pfblockerng_alerts.php:581 PHP ERROR: Type: 1, File: /usr/local/www/pfblockerng/pfblockerng_alerts.php, Line: 581, Message: Allowed memory size of 268435456 bytes exhausted (tried to allocate 72 bytes)

                      This is on a Netgate C2758 box with 8GB of RAM and a small SSD with plenty of space, so this error doesn't make much sense to me.  Is there a hard-set limit somewhere that I can adjust upwards?

                      1 Reply Last reply Reply Quote 0
                      • BBcan177B
                        BBcan177 Moderator
                        last edited by

                        Hi adx442,

                        The Alerts tab reads the pfSense Firewall logs. How many log entries do you have defined in the syslog settings? Also try to clear the firewall log and see if the error returns. The memory issue is related to PHP and not the hardware itself.

                        "Experience is something you don't get until just after you need it."

                        Website: http://pfBlockerNG.com
                        Twitter: @BBcan177  #pfBlockerNG
                        Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                        1 Reply Last reply Reply Quote 0
                        • A
                          adx442
                          last edited by

                          Yup, I'd already increased PHP's memory limit to 512M.  Turns out, the syslog size was a little too large for even that amount of memory, cutting it in half and clearing the logs did fix the behavior.

                          Sorry, the only place I'd been seeing this issue exposed was in pfBlockerNG, though it was unrelated in the end.

                          1 Reply Last reply Reply Quote 0
                          • W
                            Wolf666
                            last edited by

                            I noted that each time I update pfSense 2.3 build, after reboot or no, DNSBL lists are not correctly loaded, in fact the widget shows 0 ips. I have to manually ask for reload to get list loaded and blocking feature to work again.

                            Modem Draytek Vigor 130
                            pfSense 2.4 Supermicro A1SRi-2558 - 8GB ECC RAM - Intel S3500 SSD 80GB - M350 Case
                            Switch Cisco SG350-10
                            AP Netgear R7000 (Stock FW)
                            HTPC Intel NUC5i3RYH
                            NAS Synology DS1515+
                            NAS Synology DS213+

                            1 Reply Last reply Reply Quote 0
                            • ?
                              A Former User
                              last edited by

                              Same here as noted by Wolf666. Below the link to a related or not issue :o with Unbound not starting properly after any reboot.

                              https://forum.pfsense.org/index.php?topic=109101.0

                              1 Reply Last reply Reply Quote 0
                              • BBcan177B
                                BBcan177 Moderator
                                last edited by

                                @Wolf666:

                                I noted that each time I update pfSense 2.3 build, after reboot or no, DNSBL lists are not correctly loaded, in fact the widget shows 0 ips. I have to manually ask for reload to get list loaded and blocking feature to work again.

                                @webtyro:

                                Same here as noted by Wolf666.

                                Thanks for the report…

                                If you are able to modify a file, please edit:    /usr/local/pkg/pfblockerng/pfblockerng.inc

                                In 2.3 - Line : 3149
                                https://github.com/pfsense/FreeBSD-ports/blob/devel/net/pfSense-pkg-pfBlockerNG/files/usr/local/pkg/pfblockerng/pfblockerng.inc#L3149

                                In 2.2.x - Line: 3156
                                https://github.com/pfsense/pfsense-packages/blob/master/config/pfblockerng/pfblockerng.inc#L3156

                                and edit the line:

                                if (empty($lists_dnsbl_all)) {

                                to

                                if (empty($lists_dnsbl_all) && !$pfb['save']) {

                                First make sure that the widget doesn't show the DNSBL count as "0" (Run a force reload if its "0"), then reboot and ensure that post-reboot that the widget DNSBL count is accurate…

                                Post back if this fixes this issue...

                                Thanks!

                                "Experience is something you don't get until just after you need it."

                                Website: http://pfBlockerNG.com
                                Twitter: @BBcan177  #pfBlockerNG
                                Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                1 Reply Last reply Reply Quote 0
                                • T
                                  turker
                                  last edited by

                                  @BBcan177:

                                  and edit the line:

                                  if (empty($lists_dnsbl_all)) {

                                  to

                                  if (empty($lists_dnsbl_all) && !$pfb['save']) {

                                  First make sure that the widget doesn't show the DNSBL count as "0" (Run a force reload if its "0"), then reboot and ensure that post-reboot that the widget DNSBL count is accurate…

                                  Post back if this fixes this issue...

                                  Thanks!

                                  Fix my problem. Thanks BBcan177.

                                  1 Reply Last reply Reply Quote 0
                                  • W
                                    Wolf666
                                    last edited by

                                    Fix mine also.

                                    Modem Draytek Vigor 130
                                    pfSense 2.4 Supermicro A1SRi-2558 - 8GB ECC RAM - Intel S3500 SSD 80GB - M350 Case
                                    Switch Cisco SG350-10
                                    AP Netgear R7000 (Stock FW)
                                    HTPC Intel NUC5i3RYH
                                    NAS Synology DS1515+
                                    NAS Synology DS213+

                                    1 Reply Last reply Reply Quote 0
                                    • ?
                                      A Former User
                                      last edited by

                                      @BBcan177
                                      That did the trick for mine also. Thank you.

                                      1 Reply Last reply Reply Quote 0
                                      • N
                                        nightanole
                                        last edited by

                                        Semi complete n00b here.  I got it up and running with just dnsbl.  However it just stops after a few hours and lets everything through.  Is there something i can check?  I cant see any errors being thrown in the logs, cron jobs are doing things etc every hour.

                                        1 Reply Last reply Reply Quote 0
                                        • BBcan177B
                                          BBcan177 Moderator
                                          last edited by

                                          Ensure that your LAN devices have their DNS settings set to only pfSense. If you ping the DNSBL VIP does it resolve? If you browse the the DNSBL VIP do you get the 1x1?

                                          "Experience is something you don't get until just after you need it."

                                          Website: http://pfBlockerNG.com
                                          Twitter: @BBcan177  #pfBlockerNG
                                          Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                          1 Reply Last reply Reply Quote 0
                                          • N
                                            nightanole
                                            last edited by

                                            i can ping the VIP from my 192.1.6.2.xxx to the VIP http://10.10.10.1/.

                                            If i load up the web page its blank.

                                            Not seeing anything about a gif.

                                            The only hint is <title>10.10.10.1 (1×1)</title>

                                            This happens if it is blocking correctly or incorrectly.

                                            It seems that everything works till the first cron job.  After that if i want it to work i have to force update till the next cron job.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.