PfBlockerNG

pfsenseboonie

Hi all,

I find my dropbox syncing is blocked.

In logs I see

IBlock_BT_Hijack list contains 162.125.0.0/24 which is used dropbox.

How should I proceed to get dropbox working again.

Thanks.

RonpfS

@pfsenseboonie:

Hi all,

I find my dropbox syncing is blocked.

In logs I see

IBlock_BT_Hijack list contains 162.125.0.0/24 which is used dropbox.

How should I proceed to get dropbox working again.

Thanks.

You need to create a Permit Outbound pass rule for the IP of you seedbox
or get an IP outside that range from your provider.

pfsenseboonie

@RonpfS:

@pfsenseboonie:

Hi all,

I find my dropbox syncing is blocked.

In logs I see

IBlock_BT_Hijack list contains 162.125.0.0/24 which is used dropbox.

How should I proceed to get dropbox working again.

Thanks.

You need to create a Permit Outbound pass rule for the IP of you seedbox
or get an IP outside that range from your provider.

Just to be clear when I say dropbox I mean as in Dropbox the company
Their client desktop app is trying to connect out to 162.125.17.0/24 and 162.125.32.0/24

I've enabled suppression and manually added both above networks to pfBlockerNGSuppress Alias. And then "reloaded"

What I do not understand is your reference to a seedbox. I am not sure if I have one of those or not … and yes I feel silly saying this.
How/Where do I create this Permit outbound pass rule. And how does pfBlockerNGSuppress tie in?

I went ahead and creating a pass outbound in floating rules and moved it to the very top of the list. I am not sure if this is what you meant or if it is correct.

floating.png_thumb

RonpfS

Seedbox … Dropbox, whatever rock you boat :P

Did you read the section in the picture.

It tell you NOT to use pfBlockerNGSuppress Alias in FW rules :o
It tell you that suppression ONLY work for /32 or /24 networks.
IBlock_BT_Hijack specify 162.125.0.0/16, so the "+" icon is not available in the Alerts Tab,
Putting 162.125.17.0/24 and 162.125.32.0/24 in pfBlockerNGSuppress is useless.

So move the 2 networks to a new alias pfBlockerWhiteList
Create a FW rule on LAN pass pfBlockerWhiteList
or on the floating tab selecting all LANs interfaces

pfBlockerNGWhiteList.JPG_thumb

pfsenseboonie

@RonpfS:

Seedbox … Dropbox, whatever rock you boat :P

Did you read the section in the picture.

It tell you NOT to use pfBlockerNGSuppress Alias in FW rules :o
It tell you that suppression ONLY work for /32 or /24 networks.
IBlock_BT_Hijack specify 162.125.0.0/16, so the "+" icon is not available in the Alerts Tab,
Putting 162.125.17.0/24 and 162.125.32.0/24 in pfBlockerNGSuppress is useless.

So move the 2 networks to a new alias pfBlockerWhiteList
Create a FW rule on LAN pass pfBlockerWhiteList
or on the floating tab selecting all LANs interfaces

Aha! Ok I have done this now. But I am still blocked.
So an extra question.
You said set it up as pass outbound meaning the LAN sending to internet.

From pfSense Point of view this is inbound right (packets flying off the network into pfsense)? So I have to re-set to direction=in? I initially had it to direction=out and was still being blocked.

I will monitor and see, but you can correct me if i am worng.

Update
–-------
It seems the above in the case. If I set direction=out, I can't ping dropbox network IPs. When set to direction=in, I can.
Have to wait and see now if it stays connected.

Update 2

Ok I think that sloved it thanks very much Ron. I now know how to suppress an IP blocked by pfBNG.

A Former User

Whoa there pfsenseboonie, before you run off I am still confused. :o
Not sure if you are blocking inbound direction with PFBlockerng but that would then make sense. ??? but wrong.
If you are NOT running any open ports to services like a Web Server behind the firewall then you DO NOT need to block Inbound. The firewall is already by Default doing that. That would also probably explain the ping sent to Dropseed errr box whatever not getting back in to you. Really only need to block Outbound and save the firewall much needed processor resources for other tasks.
RonpfS was correct in telling you to allow outbound.
If you set only Outbound blocking and let the firewall default handle the inbound blocking it then makes sense to allow out to Dropbox so your machine will initiate the handshake with dropbox and the firewall will allow the return response back in.
Outbound is LAN to WEB…....Inbound is WEB to LAN ;) Keep it simple.

pfsenseboonie

@webtyro:

Not sure if you are blocking inbound direction with PFBlockerng but that would then make sense. ??? but wrong.
If you are NOT running any open ports to services like a Web Server behind the firewall then you DO NOT need to block Inbound. The firewall is already by Default doing that. That would also probably explain the ping sent to Dropseed errr box whatever not getting back in to you. Really only need to block Outbound and save the firewall much needed processor resources for other tasks.

Hey there,
Yes thats correct I have open ports on the wan interface, so only blocking with pfBNG on those specific ports.

A Former User

Good. Was not sure. ::) Late night, sleeping at the keyboard again.

rocket_raccoon

@BBcan177

Is it possible to add the country based easylist feeds like german easylist etc.?

BBcan177

@rocket_raccoon:

@BBcan177

Is it possible to add the country based easylist feeds like german easylist etc.?

Yes its something that I'd like to add when I find some time… :)

The issue with EasyLists, is that only certain categories in the list can be used... If you can download that German Feed, and see which categories can be blocked that would be a good help... (Same applies for other Languages...)

For EasyList, its only collecting 1.AdServers 2. AdServers Popup 3. Adult AdServers 4. Adult AdServer Popup categories...

Gradius

I'm running the last 2.3 and getting a lot those errors:

FreeBSD 10.3-RELEASE #5 05adf0a(RELENG_2_3_0): Mon Apr 11 18:56:05 CDT 2016     root@ce23-i386-builder:/builder/pfsense-230/tmp/obj/builder/pfsense-230/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
[13-Apr-2016 14:00:00 America/Santiago] PHP Stack trace:
[13-Apr-2016 14:00:00 America/Santiago] PHP   1\. {main}() /usr/local/www/pfblockerng/pfblockerng.php:0
[13-Apr-2016 14:00:00 America/Santiago] PHP   2\. pfblockerng_sync_cron() /usr/local/www/pfblockerng/pfblockerng.php:94
[13-Apr-2016 14:00:00 America/Santiago] PHP   3\. sync_package_pfblockerng() /usr/local/www/pfblockerng/pfblockerng.php:387

BBcan177

@Gradius:

I'm running the last 2.3 and getting a lot those errors:

Hi, Those errors don't point to the issue unfortunately… Could you take a look at the file /tmp/PHP_errors.log and see if it shows any other clues?

It looks like the pfBlockerNG Cron task is being called, but there is no specific error indicated? Also take a look at the pfblockerng.log file around the timestamps of these errors, and see if they report any additional clues…

dstroot

@BBcan177:

Yes the recent changes in pfense 2.3 from Lighttpd to NGINX broke the DNSBL feature… I will be submitting a PR to fix this up soon....

Any news on this front I upgraded to 2.3 and I think this blew up. It came up without DNS working and I removed the DNSBL stuff to get a working config. Reading the forum now for status.

Cheers!

BBcan177

@dstroot:

@BBcan177:

Yes the recent changes in pfense 2.3 from Lighttpd to NGINX broke the DNSBL feature… I will be submitting a PR to fix this up soon....

Any news on this front I upgraded to 2.3 and I think this blew up. It came up without DNS working and I removed the DNSBL stuff to get a working config. Reading the forum now for status.

Cheers!

Hey Dan, if I recall, you are using a Nano or Ramdisk correct?

If that is the case, when you did your update, Unbound had the Adv. Options with the "server:include: /var/unbound/pfb_dnsbl.conf" line but since the /var folder is wiped out, Unbound crashes due to this missing file.

You can run a "Force Update" in pfBNG to get it working again.

For others with this issue (Nano/RamDisk). Best to disable the pfBNG package before an Update or a configuration Restore (IE: Make sure the backup configuration has pfBNG disabled)

Gradius

@BBcan177:

@Gradius:

I'm running the last 2.3 and getting a lot those errors:

Hi, Those errors don't point to the issue unfortunately… Could you take a look at the file /tmp/PHP_errors.log and see if it shows any other clues?

It looks like the pfBlockerNG Cron task is being called, but there is no specific error indicated? Also take a look at the pfblockerng.log file around the timestamps of these errors, and see if they report any additional clues…

-rw-r--r--   1 root  wheel       0 Apr 14 12:26 PHP_errors.log

===[  DNSBL Process  ]================================================

Warning: Invalid argument supplied for foreach() in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3057

Call Stack:
    0.0019     211244   1\. {main}() /usr/local/www/pfblockerng/pfblockerng.php:0
    0.0902    6447240   2\. pfblockerng_sync_cron() /usr/local/www/pfblockerng/pfblockerng.php:94
    0.0904    6450620   3\. sync_package_pfblockerng() /usr/local/www/pfblockerng/pfblockerng.php:387

Clearing all DNSBL Feeds...  completed
Validating database... completed
Restarting Unbound ... completed
DNSBL update [ 0 ]... completed
------------------------------------------

Gradius

Part of coding apoint the error:

		// Save alias statistics to file (Remove any feeds that are not referenced)
		$handle = @fopen("{$pfb['dnsbl_info']}", 'w');
		fwrite($handle, "# Keeping this file open in a file editor will interrupt DNSBL!\n");

foreach ($dnsbl_info as $alias) {

		if (in_array($alias[0], $alias_dnsbl_all)) {
				fputcsv($handle, $alias);
			}
		}
		@fclose($handle);

BBcan177

@Gradius:

Warning: Invalid argument supplied for foreach() in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3057

Clearing all DNSBL Feeds… completed
Validating database... completed
Restarting Unbound ... completed
DNSBL update [ 0 ]… completed

Does DNSBL have any defined Feeds? Its showing as "0"? If you don't use DNSBL, then disable it, or add some Feeds…

However, to fix this issue, will need to add two lines of code as indicated in Red below. I didn't adjust the line spacing, to make it easier for you to add in these two lines... Will get this added to the next Pull Request...

// Save alias statistics to file (Remove any feeds that are not referenced)
$handle = @fopen("{$pfb['dnsbl_info']}", 'w');
fwrite($handle, "# Keeping this file open in a file editor will interrupt DNSBL!\n");
if (!empty($dnsbl_info)) {
foreach ($dnsbl_info as $alias) {
if (in_array($alias[0], $alias_dnsbl_all)) {
fputcsv($handle, $alias);
}
}
}
@fclose($handle);

Gradius

Fixed.

Thanks

KnowledgeAddict

What up, @BBcan177!

Long-time lurker, first-time poster. I think I've discovered a bug in your otherwise fantastic piece of software. I'm on the latest versions of everything and have DNSBL up and running smoothly. I have the North America list set to Alias Native for the United States only, and I have the pfb_NAmerica alias used in a WAN rule to allow access to an OpenVPN server running on pfSense from the public internet, but only from United States source IP's. I also have the option selected in pfBlockerNG to kill states during cron/force update. When I run a force update with the setup outlined above, after the block lists are updated, the log shows pfBlockerNG removing the states of what looks like all active connections to United States IP's with the culprit being [ pfB_NAmerica_v4-Inbound ]. This happens whether or not logging to the firewall log is enabled for the rule and whether or not the rule is set to disabled. Changing the list action to Alias Permit or Alias Match instead of Alias Native also doesn't change this behavior; states still get killed. Removing the alias from the rule or completely deleting the rule does end the update massacre.

If a list is set to Alias Native, shouldn't pfBlockerNG only kill the states for that list if the alias is used in an active (not disabled) blocking rule? Also, I wouldn't expect that a list set to Alias Permit or Alias Match would ever have its states killed. Am I missing something?

trumee

Hello,

For Outbound Interface I have 'LAN' selected and 'Deny Both' in the IPv4 lists. Is it possible exclude a source ip address from the LAN interface? I dont want to use 'Deny Outbound' for a particular ip address.

Thanks