Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfBlockerNG v2.0 w/DNSBL

    pfBlockerNG
    192
    1.1k
    1.3m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      Abhishek
      last edited by 

      
This error is from the "Update" Tab... Do you notice any issues when viewing that page? When you see this error, the next time... Please review the pfblockerng.log and see if you find any errors around the same time and send those to me...

      sure if i get same crash error again  i will will upload the log

      
Can you ping the DNSBL VIP address?  There is a setting in the DNSBL tab to auto-create a floating permit rule, then select all of the LAN subnets that need access to the DNSBL VIP...

      Connection is

      WAN –- PFSENSE---LAN ( Single LAN  ( No van or multiple network ) 
      i uploaded a pic in above post showing ping  , i am able to ping with no delay

      Pinging secure.adnxs.com [10.10.10.1] with 32 bytes of data:
      Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
      Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
      Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
      Reply from 10.10.10.1: bytes=32 time<1ms TTL=64

      
Its quite strange for the DNSBLIP alias to have so many IPs... If you have a IP based List, add those to the IPv4 tab instead of DNSBL which is domain based. The DNSBLIP is to collect any IPs that are found in a DNSBL feed.... Its not going to cause any issues, but its better in the IPv4 tab....

      yes i will move IP based list from DNSBL to IPV4 tab

      2.3-RC (amd64)
      built on Mon Apr 04 17:09:32 CDT 2016
      FreeBSD 10.3-RELEASE
      Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz

      darkstat 3.1.2_1
      Lightsquid 3.0.3_1
      mailreport 3.0_1
      pfBlockerNG 2.0.9_1  
      RRD_Summary 1.3.1_2
      snort 3.2.9.1_9  
      squid 0.4.16_1  
      squidGuard 1.14_1
      syslog-ng 1.1.2_2

      1 Reply Last reply Reply Quote 0
      • BBcan177B
        BBcan177 Moderator
        last edited by

        @Merchant:

        Can you ping the DNSBL VIP address?  There is a setting in the DNSBL tab to auto-create a floating permit rule, then select all of the LAN subnets that need access to the DNSBL VIP…

        Pinging secure.adnxs.com [10.10.10.1] with 32 bytes of data:
        Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
        Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
        Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
        Reply from 10.10.10.1: bytes=32 time<1ms TTL=64

        You need to run this command to check for proper connectivity to the DNSBL VIP:
        You should also be able to browse to the DNSBL VIP and get the 1x1…

        ping 10.10.10.1

        Goto the Alerts tab, and see what domains are being blocked… You can also hit F12 in the browser and open Dev Mode... Goto "console" and look for the domains that are blocked... You can try to suppress those domains that are causing you issue... Finally ensure that your desktops only have the pfSense DNS IP defined and no other DNS servers listed...

        "Experience is something you don't get until just after you need it."

        Website: http://pfBlockerNG.com
        Twitter: @BBcan177  #pfBlockerNG
        Reddit: https://www.reddit.com/r/pfBlockerNG/new/

        1 Reply Last reply Reply Quote 0
        • A
          Abhishek
          last edited by

          update

          all my DNSBL list are names

          
http://adaway.org/hosts.txt
http://someonewhocares.org/hosts/
http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
http://winhelp2002.mvps.org/hosts.txt
http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&startdate[day]=&startdate[month]=&startdate[year]=&useip=0.0.0.0
http://www.securemecca.com/Downloads/hosts.txt

http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintextoup
http://hosts-file.net/ad_servers.txt
http://adaway.org/hosts.txt
http://sysctl.org/cameleon/hosts
http://adblock.gjtech.net/?format=unix-hosts

https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt
http://hosts-file.net/fsa.txt
http://hosts-file.net/hjk.txt
http://hosts-file.net/pha.txt
https://www.dshield.org/feeds/suspiciousdomains_High.txt
https://s3.amazonaws.com/lists.disconnect.me/simple_malvertising.txt
http://www.malwaredomainlist.com/hostslist/hosts.txt
http://mirror1.malwaredomains.com/files/justdomains
https://s3.amazonaws.com/lists.disconnect.me/simple_malware.txt
http://hosts-file.net/emd.txt
http://hosts-file.net/exp.txt
http://hosts-file.net/mmt.txt
http://lists.malwarepatrol.net/cgi/getfile?receipt=f1442112770&product=8&list=dansguardian
http://zeustracker.abuse.ch/blocklist.php?download=domainblocklist
https://malc0de.com/bl/BOOT

http://hosts-file.net/grm.txt
http://hosts-file.net/hfs.txt

https://raw.githubusercontent.com/Dawsey21/Lists/master/main-blacklist.txt

http://hosts-file.net/hphosts-partial.txt

http://hosts-file.net/hphosts-partial.txt
http://someonewhocares.org/hosts/hosts
http://winhelp2002.mvps.org/hosts.txt
http://gist.githubusercontent.com/BBcan177/4a8bf37c131be4803cb2/raw

http://osint.bambenekconsulting.com/feeds/dga-feed.gz
http://osint.bambenekconsulting.com/feeds/c2-dommasterlist.txt


          
Pinging 10.10.10.1 with 32 bytes of data:
Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
Reply from 10.10.10.1: bytes=32 time<1ms TTL=64
Reply from 10.10.10.1: bytes=32 time<1ms TTL=64

Ping statistics for 10.10.10.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

          But when i tried to open 10.10.10.1  in webbrowser i am getting pfsense login page instead of 1x1 image , so i guess that might b the problem

          so i post my detail settings

          SINGLE WAN LINK to NIC 1 PFSEnse ( wan dhcp )  –-----PFsense WAN Port --------PFsense LAN ( SINGLE LAN 192.168.x.x Network )

          we dont have Multi WAN or MUlti LAN /Vlan   
          ie two NIC Cards ( 1 connected ISP LINK ) and other NIC Card ( Connected to Switch )

          HTTPS is enabled for Pfsense 
          Installation is Fresh 2.3 install with xml backup restored

          edit

          
nginx: 2016/04/20 15:09:06 [error] 65374#0: *476 open() "/usr/local/www/track/click/30047178/community.spiceworks.com" failed (2: No such file or directory), client: 10.10.10.1, server: , request: "GET /track/click/30047178/community.spiceworks.com?p=eyJzIjoiYnIzelB6UlBqRVFBSXNvajVBX0k5VVY0SExzIiwidiI6MSwicCI6IntcInVcIjozMDA0NzE3OCxcInZcIjoxLFwidXJsXCI6XCJodHRwczpcXFwvXFxcL2NvbW11bml0eS5zcGljZXdvcmtzLmNvbVxcXC90b3BpY1xcXC8xNTY3NTk1LWNhbi1pLXAydi1hLWRlYWQtcGVyc29uYWwtY29tcHV0ZXI_dXRtX2NhbXBhaWduPWRpZ2VzdCZ1dG1fbWVkaXVtPWVtYWlsJnV0bV9zb3VyY2U9ZGlnZXN0JnV0bWU9Z3JvdXBzK3BvcHVsYXIzXCIsXCJpZFwiOlwiNzFiODNmZjE4MzU3NDhlNzkzZDE3MmYzNDY5MTQ2MzhcIixcInVybF9pZHNcIjpbXCI1Zjg4NGU0OGIyYzY3OTZlMmExYzY3ZjNhNWQ2MDY3NDljZGJhMjFjXCJdfSJ9 HTTP/1.1", host: "track.spiceworks.com"

          P1.PNG
          P1.PNG_thumb
          P2.PNG
          P2.PNG_thumb
          P3.PNG
          P3.PNG_thumb
          P4.PNG
          P4.PNG_thumb
          P5.PNG
          P5.PNG_thumb
          P6.PNG
          P6.PNG_thumb
          P7.PNG
          P7.PNG_thumb

          2.3-RC (amd64)
          built on Mon Apr 04 17:09:32 CDT 2016
          FreeBSD 10.3-RELEASE
          Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz

          darkstat 3.1.2_1
          Lightsquid 3.0.3_1
          mailreport 3.0_1
          pfBlockerNG 2.0.9_1  
          RRD_Summary 1.3.1_2
          snort 3.2.9.1_9  
          squid 0.4.16_1  
          squidGuard 1.14_1
          syslog-ng 1.1.2_2

          1 Reply Last reply Reply Quote 0
          • D
            docjay
            last edited by

            @BBcan177:

            @docjay:

            BBCAN,

            Hey- thanks for all of your hard work with this package!  I'm setting up a 2nd PFsense box for a client and I'm wanting to copy over my 'pfblockerNG' config.  Is there an easy way to do it other than doing it all by hand?

            thanks

            Jamie

            Did you try the "Sync" Tab in the package?

            LOL, nope.  Sorry, I didn't see it or think it would do what I would expect.  I'll give it a shot this evening!

            Thanks!

            1 Reply Last reply Reply Quote 0
            • BBcan177B
              BBcan177 Moderator
              last edited by

              @Merchant:

              update

              An obersevation: why use three different yoyo feeds:
              http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
              http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&startdate[day]=&startdate[month]=&startdate[year]=&useip=0.0.0.0
              http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintextoup

              Is there a reason why you seperated hpHosts, instead of using the single download for them all?
              http://hosts-file.net/download/hosts.zip

              http://hosts-file.net/fsa.txt
              http://hosts-file.net/hjk.txt
              http://hosts-file.net/pha.txt
              http://hosts-file.net/emd.txt
              http://hosts-file.net/exp.txt
              http://hosts-file.net/mmt.txt
              http://hosts-file.net/grm.txt
              http://hosts-file.net/hfs.txt

              As a note: Look at the pfblockerng.log, it will show a section "DNSBL Domain/IP Counts" which will show you which DNSBL Feeds have IPs… look for the .ip extension...

              But when i tried to open 10.10.10.1  in webbrowser i am getting pfsense login page instead of 1x1 image , so i guess that might b the problem

              Yes your problem is due to Squid… I don't use Squid, and can't really help you workaround this issue.... Others have had a similar issue, but haven't seen anyone reply with a solution yet...

              "Experience is something you don't get until just after you need it."

              Website: http://pfBlockerNG.com
              Twitter: @BBcan177  #pfBlockerNG
              Reddit: https://www.reddit.com/r/pfBlockerNG/new/

              1 Reply Last reply Reply Quote 0
              • D
                docjay
                last edited by

                @docjay:

                @BBcan177:

                @docjay:

                BBCAN,

                Hey- thanks for all of your hard work with this package!  I'm setting up a 2nd PFsense box for a client and I'm wanting to copy over my 'pfblockerNG' config.  Is there an easy way to do it other than doing it all by hand?

                thanks

                Jamie

                Did you try the "Sync" Tab in the package?

                LOL, nope.  Sorry, I didn't see it or think it would do what I would expect.  I'll give it a shot this evening!

                Thanks!

                I tried the sync tab and it worked bad ass!  I should have looked at it before, sorry for bothering you & thanks for thinking of this option!

                1 Reply Last reply Reply Quote 0
                • A
                  Abhishek
                  last edited by

                  @BBcan177:

                  @Merchant:

                  update

                  An obersevation: why use three different yoyo feeds:
                  http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
                  http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&startdate[day]=&startdate[month]=&startdate[year]=&useip=0.0.0.0
                  http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintextoup

                  Is there a reason why you seperated hpHosts, instead of using the single download for them all?
                  http://hosts-file.net/download/hosts.zip

                  http://hosts-file.net/fsa.txt
                  http://hosts-file.net/hjk.txt
                  http://hosts-file.net/pha.txt
                  http://hosts-file.net/emd.txt
                  http://hosts-file.net/exp.txt
                  http://hosts-file.net/mmt.txt
                  http://hosts-file.net/grm.txt
                  http://hosts-file.net/hfs.txt

                  As a note: Look at the pfblockerng.log, it will show a section "DNSBL Domain/IP Counts" which will show you which DNSBL Feeds have IPs… look for the .ip extension...

                  But when i tried to open 10.10.10.1  in webbrowser i am getting pfsense login page instead of 1x1 image , so i guess that might b the problem

                  Yes your problem is due to Squid… I don't use Squid, and can't really help you workaround this issue.... Others have had a similar issue, but haven't seen anyone reply with a solution yet...

                  1. thank you , i will update the host's list

                  2. i will try modify my wpad so that host wont use proxy for 10.x.x.x network , will check today , thank you as  usual , u rocks :)

                  update

                  Updated my wpad and now its working :D , thank you  . its loading (1x1) 
                  Now all websites are loading fast

                  2.3-RC (amd64)
                  built on Mon Apr 04 17:09:32 CDT 2016
                  FreeBSD 10.3-RELEASE
                  Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz

                  darkstat 3.1.2_1
                  Lightsquid 3.0.3_1
                  mailreport 3.0_1
                  pfBlockerNG 2.0.9_1  
                  RRD_Summary 1.3.1_2
                  snort 3.2.9.1_9  
                  squid 0.4.16_1  
                  squidGuard 1.14_1
                  syslog-ng 1.1.2_2

                  1 Reply Last reply Reply Quote 0
                  • G
                    GoldServe
                    last edited by

                    Has anyone noticed the dnsbl alert entries have the wrong time? Seems to be a few hours ahead from all the other firewall entries.

                    1 Reply Last reply Reply Quote 0
                    • A
                      Abhishek
                      last edited by

                      @GoldServe:

                      Has anyone noticed the dnsbl alert entries have the wrong time? Seems to be a few hours ahead from all the other firewall entries.

                      mine is showing correct

                      PFB1.png
                      PFB1.png_thumb

                      2.3-RC (amd64)
                      built on Mon Apr 04 17:09:32 CDT 2016
                      FreeBSD 10.3-RELEASE
                      Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz

                      darkstat 3.1.2_1
                      Lightsquid 3.0.3_1
                      mailreport 3.0_1
                      pfBlockerNG 2.0.9_1  
                      RRD_Summary 1.3.1_2
                      snort 3.2.9.1_9  
                      squid 0.4.16_1  
                      squidGuard 1.14_1
                      syslog-ng 1.1.2_2

                      1 Reply Last reply Reply Quote 0
                      • BBcan177B
                        BBcan177 Moderator
                        last edited by

                        @GoldServe:

                        Has anyone noticed the dnsbl alert entries have the wrong time? Seems to be a few hours ahead from all the other firewall entries.

                        Which DNSBL alerts? HTTP or HTTPS. For HTTP, it takes the request time from the remote Lan device. Could the clock be off on one of your desktops?

                        "Experience is something you don't get until just after you need it."

                        Website: http://pfBlockerNG.com
                        Twitter: @BBcan177  #pfBlockerNG
                        Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                        1 Reply Last reply Reply Quote 0
                        • G
                          GoldServe
                          last edited by

                          Seems like HTTP timestamps are wrong. Which remote Lan device? All my laptops and desktops are Macs and their times are all correct. I am running pfsense in ESXI 6…

                          1 Reply Last reply Reply Quote 0
                          • G
                            GoldServe
                            last edited by

                            I don't know if it matters but it seems like my /usr/local/etc/php.ini has this line set

                            date.timezone="Etc/UTC"

                            when clearly /etc/rc.php_ini_setup contains the following code:

                            unset TIMEZONE
# Fetch the timezone from /var/db/zoneinfo if present
if [ -f /var/db/zoneinfo ]; then
	TIMEZONE=$(cat /var/db/zoneinfo)
fi

if [ -z "${TIMEZONE}" ]; then
	# Second option is from config.xml
	TIMEZONE=$(/usr/local/sbin/read_xml_tag.sh string system/timezone)
fi

if [ -z "${TIMEZONE}" ]; then
	# Last option, use default value from $g or Etc/UTC
	TIMEZONE=$(/usr/local/sbin/read_global_var default_timezone "Etc/UTC")
fi

                            Anyone spot anything wrong? I verified the timezone is correct by running the script /usr/local/sbin/read_xml_tag.sh string system/timezone

                            1 Reply Last reply Reply Quote 0
                            • A
                              Abhishek
                              last edited by

                              Hi,

                              same situation in my environment. I changes from HTTPS WebUI to HTTP because WPAD is hosted on pfsense itself. But i defined all private IPs to go DIRECT and not using the proxy in the WPAD files. But unfortunately it does not work.

                              Further I disabled auto proxy configuration and hardcoded the proxy in my browser but DNSBL still does only work with HTTP (pfsense WebUI page) but not with HTTPS. Further it does not log anything :-(

                              PS:
                              Anybody here who could suggest a good DNSBL which focuses on command and control server and such stuff?

                              can u post ur wpad file content ,  ( Look my wpad file , for me after instructing wpad to give Direct connection to 10.x.x..x now its working okay

                              @Nachtfalke:

                              @killmasta93:

                              FOR PEOPLE WITH GIF ISSUES READ THIS

                              If your running WPAD and have on your navigator to auto detect proxy you WILL get the webGUI of pfSense instead of the GIF but disable the auto detect proxy on the navigator you then will see the GIF…It seems that WPAD overrides everything even when it comes to OpenVPN also...

                              Thanks for that information. I am using WPAD with squid3 proxy. But I only get the WebUI with http websites. Is it working for you with httpS websites, too?
                              Can you describe if you configued something sepcidal to get pfblocker-NG + squid (http + https) working?

                              For me it looks like it is not working fpr https and it ios not working for http and https to see the bad websites in the "Alerts" tab of pfblopcker-ng.

                              Regards

                              @Nachtfalke:

                              @killmasta93:

                              Well I have pfBlockerNG working just for IP I had to disable DNSBL because WPAD was overriding everything. Because WPAD files are hosted on pfSense I had to revert to HTTP on the webGUI of pfSense. But by disabling auto detect proxy then works DNSBL but then WPAD wont work BUT transparent proxy will. I guess having WPAD and DNSBL wont work at the same time. UNLESS somehow on the wpad.dat a way to direct or ignore the 10.10.10.1 something that i wish it can do with OpenVPN. You get the HTTPS sites i guess because WPAD overlaps that but the http that would be the transparent proxy which DNSBL does not have an issue. Also depends if your webGUI is HTTPS or HTTP

                              I also had issue with squid with wpad initially and  with BBcan177 help i resolved the issue with my setup

                              i updated my wpad.pac file to make direct connected to 10.10.10.1

                              
 function FindProxyForURL(url,host)
 {

    if (isInNet( host, "192.168.0.0", "255.255.255.0" )) 
        { return "DIRECT"; }
	 if (isInNet( host, "10.10.10.1", "255.255.255.0" )) 
        { return "DIRECT"; }	
	return "PROXY 192.168.0.1:3128";
 }

                              now i am able to use proxy with wpad and also get 1x1 gif while blocking

                              2.3-RC (amd64)
                              built on Mon Apr 04 17:09:32 CDT 2016
                              FreeBSD 10.3-RELEASE
                              Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz

                              darkstat 3.1.2_1
                              Lightsquid 3.0.3_1
                              mailreport 3.0_1
                              pfBlockerNG 2.0.9_1  
                              RRD_Summary 1.3.1_2
                              snort 3.2.9.1_9  
                              squid 0.4.16_1  
                              squidGuard 1.14_1
                              syslog-ng 1.1.2_2

                              1 Reply Last reply Reply Quote 0
                              • B
                                bluepr0
                                last edited by

                                Hello! I just noticed today that pfBlocker is not "working" anymore. It's actually enabled and it was working fine blocking ads, now it seems nothing changed (I'm sure I haven't changed any settings) but I'm not getting ads blocked

                                Here you can see it's enabled

                                Any ideas on what's going on? There's no errors in the logs either :(

                                It seems the latest blocked URLS were from April 19

                                DNSBL Reject HTTPS,Apr 19 18:15:10,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:10,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:11,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:15:44,ui.skype.com
DNSBL Reject HTTPS,Apr 19 18:16:44,ui.skype.com
DNSBL Reject HTTPS,Apr 19 18:17:44,ui.skype.com
DNSBL Reject HTTPS,Apr 19 18:18:44,ui.skype.com
DNSBL Reject HTTPS,Apr 19 18:19:44,ui.skype.com
DNSBL Reject HTTPS,Apr 19 18:20:44,ui.skype.com
DNSBL Reject HTTPS,Apr 19 18:20:51,ssl.google-analytics.com
DNSBL Reject HTTPS,Apr 19 18:20:51,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:51,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:51,analytics.query.yahoo.com
DNSBL Reject HTTPS,Apr 19 18:20:51,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:51,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:52,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:52,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:52,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:52,e.crashlytics.com
DNSBL Reject HTTPS,Apr 19 18:20:52,e.crashlytics.com
                                1 Reply Last reply Reply Quote 0
                                • BBcan177B
                                  BBcan177 Moderator
                                  last edited by

                                  @bluepr0:

                                  Hello! I just noticed today that pfBlocker is not "working" anymore. It's actually enabled and it was working fine blocking ads, now it seems nothing changed (I'm sure I haven't changed any settings) but I'm not getting ads blocked

                                  Ensure that the LAN devices have only pfSense set as their DNS server. Can you ping the DNSBL VIP address? Can you browse to the DNSBL VIP address?

                                  "Experience is something you don't get until just after you need it."

                                  Website: http://pfBlockerNG.com
                                  Twitter: @BBcan177  #pfBlockerNG
                                  Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                  1 Reply Last reply Reply Quote 0
                                  • BBcan177B
                                    BBcan177 Moderator
                                    last edited by

                                    @Merchant:

                                    I also had issue with squid with wpad initially and  with BBcan177 help i resolved the issue with my setup

                                    i updated my wpad.pac file to make direct connected to 10.10.10.1

                                    
 function FindProxyForURL(url,host)
 {
    if (isInNet( host, "192.168.0.0", "255.255.255.0" )) 
        { return "DIRECT"; }
    if (isInNet( host, "10.10.10.1", "255.255.255.0" )) 
        { return "DIRECT"; }	
    return "PROXY 192.168.0.1:3128";
 }

                                    now i am able to use proxy with wpad and also get 1x1 gif while blocking

                                    Thanks Merchant, I hope the other users that had the same issue can get this resolved also…  8)

                                    "Experience is something you don't get until just after you need it."

                                    Website: http://pfBlockerNG.com
                                    Twitter: @BBcan177  #pfBlockerNG
                                    Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                    1 Reply Last reply Reply Quote 0
                                    • B
                                      bluepr0
                                      last edited by

                                      @BBcan177:

                                      @bluepr0:

                                      Hello! I just noticed today that pfBlocker is not "working" anymore. It's actually enabled and it was working fine blocking ads, now it seems nothing changed (I'm sure I haven't changed any settings) but I'm not getting ads blocked

                                      Ensure that the LAN devices have only pfSense set as their DNS server. Can you ping the DNSBL VIP address? Can you browse to the DNSBL VIP address?

                                      Hello BBcan177,

                                      I can ping the IP without problems, and all my devices are using my pfsense IP as DNS (as before) so it shouldn't be a problem there. However, if by "browse the DNSBL IP" you mean that I should get a reply when trying to open it from a browser then no, I get an error

                                      But as I said, I get ping

                                      1 Reply Last reply Reply Quote 0
                                      • BBcan177B
                                        BBcan177 Moderator
                                        last edited by

                                        @bluepr0:

                                        I can ping the IP without problems, and all my devices are using my pfsense IP as DNS (as before) so it shouldn't be a problem there. However, if by "browse the DNSBL IP" you mean that I should get a reply when trying to open it from a browser then no, I get an error

                                        Do you have a multi-segmented LAN? ie -vlans etc… If so, there is an option in the DNSBL Tab, to create a Floating Permit rule. Select all the Lan segments that need access to the VIP...

                                        When you browse to the VIP, it should return the 1x1... Have you tried a different browser? or other LAN device?

                                        "Experience is something you don't get until just after you need it."

                                        Website: http://pfBlockerNG.com
                                        Twitter: @BBcan177  #pfBlockerNG
                                        Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                        1 Reply Last reply Reply Quote 0
                                        • B
                                          bluepr0
                                          last edited by

                                          @BBcan177:

                                          @bluepr0:

                                          I can ping the IP without problems, and all my devices are using my pfsense IP as DNS (as before) so it shouldn't be a problem there. However, if by "browse the DNSBL IP" you mean that I should get a reply when trying to open it from a browser then no, I get an error

                                          Do you have a multi-segmented LAN? ie -vlans etc… If so, there is an option in the DNSBL Tab, to create a Floating Permit rule. Select all the Lan segments that need access to the VIP...

                                          When you browse to the VIP, it should return the 1x1... Have you tried a different browser? or other LAN device?

                                          Nop, I don't have VLANs.

                                          Tried with Chrome but I'm getting same result

                                          But I can still ping the IP. It seems a bit weird that I'm getting 265ms though, it's just a small LAN with a 8 port switch

                                          Thanks again!

                                          1 Reply Last reply Reply Quote 0
                                          • BBcan177B
                                            BBcan177 Moderator
                                            last edited by

                                            Are you using Squid (See posts above)?

                                            If you can't browse to the DNSBL VIP, then it will always be slow, and you will not get any Alert logging…

                                            "Experience is something you don't get until just after you need it."

                                            Website: http://pfBlockerNG.com
                                            Twitter: @BBcan177  #pfBlockerNG
                                            Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post