Blacklist not downloading in pfsense 2.3 SquidGuard

peg1987

I'had the same problem, i solved it using Microsoft Edge. Firefox and chrome have both the same problem.

jitender153

I had the same problem. Tried to download blacklist with Internet Explorer and it seem that Firefox has some issues with this new interface of pfsense….

pfsensier

Dear All,

Problem Solved :) !!

Under Services Menu -> Proxy filter SquidGuard -> General settingsGeneral settings -> Black List options:

You need to tick mark (Check this option to enable Black List)

Plus, you need to fill the field (Blacklist URL) with the download link of your wish black list.

When above steps complete, then you proceed with the blacklist download and it will work :)

aminli

I did , and it is not solved.
just I checked with internet explorer, it is working !!!!!!

julio_cdn

Thanks it worked

@pfsensier:

Dear All,

Problem Solved :) !!

Under Services Menu -> Proxy filter SquidGuard -> General settingsGeneral settings -> Black List options:

You need to tick mark (Check this option to enable Black List)

Plus, you need to fill the field (Blacklist URL) with the download link of your wish black list.

When above steps complete, then you proceed with the blacklist download and it will work :)

chidgear

Could it be a problem with Nginx?
In the past, when i used Zentyal, Ii had troubles caused by the Nginx service that displayed the user interface of Zentyal. maybe it could be the same for pfSense…
(just a tought)

Edit----------
In fact. IE solved the problem so, my question is
WHY?!

Why do this open source firewall mus rely on a privative browser to work properly?
Hopefully, this gets fixed on 2.3.1

Anyways, Where are we supposed to report this kind of issues?

Greetings

SourceFinder

There is a strange thing to this: I loggin in onto the pfsense in MS edge, downloaded the blacklist again, rebooted, loggen in (still in Edge) the target rules where visible. After I done that, I logged in on the pfsense using Firefox. And… the target rules where showing here too now!!!

TiboLeGentleman

I confirm that in last version (2.3.1 RC x64), the probleme is still here.
Need Microsoft Edge to download the blacklist (don't work with firefox either chrome).

And even in Edge, there's no list in Target Category, but they're visible in Common ACL !?! Is it normal ?

I've try to reinstall three time. Configure each time. And I found that the proxy is very unstable. Very weird thing appear (one time i can access internet throught proxy, another i can't wihtout any reason)…

SourceFinder

edge/IE vs firefox/chrome: It's a common bug now, so should be solved in next release?

Target category: Yes, that's normal. In Target categories you can make your own blacklist and whitelist(s). In Common/Groups ACL these targets are visible as a category "inside" the downloaded blacklist. The naming of target categories is not very clear, though.

Simple format: make a blacklist and a whitelist in target categories (or not), make groups ACL for certain IP adresses and make a common ACL for the rest of your IP adresses. Don't forget to click Save and after that Reply in General settings after the changes.

nottyboy

@jitender153:

I had the same problem. Tried to download blacklist with Internet Explorer and it seem that Firefox has some issues with this new interface of pfsense….

this works for me too! ;D

mikenchi

WOW… I've been pulling my hair out for 3 weeks trying to get this to work on 2.3.1 with Firefox. Clicking on the download button does nothing, status bar just pops over for a second then goes back to 0%.
Just switched over to Internet Explorer 11, and it works! I'm happy I found the answer ;D but what a waste of time >:(

blckhwk133

I agree with mikenchi. I guess it is browser related issue but i don't have a theory what causing the issue. Just switch from different browser if you are using firefox. I tested it in Microsoft Edge, IE 11 and chrome.

burnhetrix

Hi im new, so i did all the steps and i dont have the url to punt in that fieldin fact, im lost can you all guive me a little of help?

This is my squidguard, and is not showing any url were can i find it?

squidguard.png_thumb

chidgear

@burnhetrix:

Hi im new, so i did all the steps and i dont have the url to punt in that fieldin fact, im lost can you all guive me a little of help?

This is my squidguard, and is not showing any url were can i find it?

You must google it. I'll give you a little help, here is the url to the most popular Squidguard blacklists
http://www.squidguard.org/blacklists.html

in that page choose a link and serch for a file with extension ".tgz" copy the link to it and put it on the field, so you can download your blacklist.

abel408

@TiboLeGentleman:

I confirm that in last version (2.3.1 RC x64), the probleme is still here.
Need Microsoft Edge to download the blacklist (don't work with firefox either chrome).

And even in Edge, there's no list in Target Category, but they're visible in Common ACL !?! Is it normal ?

I've try to reinstall three time. Configure each time. And I found that the proxy is very unstable. Very weird thing appear (one time i can access internet throught proxy, another i can't wihtout any reason)…

I'm having the same exact issue. Is there any fix to this?

chipbr

Just to add to the discussion, I´ve recently setup 3 new installs with using pfsense 2.3.1 , shalla blacklist, google chrome 51.0.2704.103 and no issues at all.

timoti_ck

I've just configured a new pfSense 2.3.2-RELEASE Box and had similar issues with downloading the Blacklist from Shallist. Was using Firefox.

To fix it, I just used Google Chrome!!

Cheers,

zehcolmeia

@milou:

Try more 5 click in 2 seconds, and download begin.

unbelieveble…. work this...

Cyberscapes

I am using a Mac Mini so I don't have access to Edge or Internet Explorer. I've tried it in Chrome, Firefox and Safari. The blacklist is still not displaying.

healperci

Hi there, i fixed it using Internet Explorer, Mozilla didn'nt .

Hope it helps somebody.