OpenVPN: Client Export Utility blank

Derelict

Yes I understand why the pfSense certificate manager has this limitation. However, nothing prevents you from issuing the server certificate using one CA and all of the client certificates using another CA if you're doing the certificates by hand. In fact, OpenVPN recommends this practice as security measure:

https://openvpn.net/index.php/open-source/documentation/howto.html#secnotes

pfSense already enforces ns-cert-type server in the client export, which means client certificates cannot be used in this manner. This method is more preferable in the document you referenced than separate CAs for servers and clients.

robatwork

Hmmm well I deleted my certificates and CA, then went from scratch.

I followed the book accessible on the pfsense portal
https://portal.pfsense.org/docs/book/certificates/index.html

created CA, then a new user (with cert), then the OpenVPN wizard using the user I just made. The export is still blank. The thing is the book describes what each of the steps do, but isn't a "how to" guide. So I've obviously missed something or got a step wrong.

Is there a step-by-step guide to creating an OpenVPN from scratch including the CA, User, Certs and OpenVPN wizard (or shouldn't I be using the wizard?) ?

thanks

viragomann

@robatwork:

created CA, then a new user (with cert), then the OpenVPN wizard using the user I just made. The export is still blank.

This all could also be done by the wizard.

Have you also created a server cert (type: server!) from the same CA and assigned it to the server?

johnpoz

yes the wizard walks you through creating a openvpn site and creating a ca for it, and the server cert. But you need to create a user on your own. You need to make sure you use the correct CA..

Go to certificates - click add, create a new one. Fill in the appropriate fields.. you will then see the cert in cert manager, then go to export util.

createcert.png_thumb

robatwork

Thanks again.
I gave it another go and this time chose Compression: No Preference and this seemed to make a difference - the Client Export is now populated.
I can't say 100% it was this and not some other setting but all is working now so time to have a play :)

johnpoz

compression has NOTHING to do with a user cert..

I can tell you for 100% it wasn't that ;)

cmb

@johnpoz:

compression has NOTHING to do with a user cert..

I can tell you for 100% it wasn't that ;)

Correct. If no users are listed, no users exist with a cert on the same CA as that OpenVPN instance. Has no relation to anything in the OpenVPN server config. Certs were added to users, then they showed up. As it notes there, and as expected.

robatwork

I will create another from scratch when I am done with this project and see if I can document what happened.

divsys

One other thing to watch for: make sure the Server's cert is type:Server and the User's cert is type:User.
The Wizard should lead you by the hand to the correct assignments.

Seems logical enough, but it seems to pop up from time to time as an issue item.

johnpoz

hehe divsys seems to be more than from time to time ;) I would say that is the vast majority of user problems is wrong cert.. What I don't get is the wizard as you stated takes you by the hand and its really pretty freaking impossible to mess it up.

My guess is they are not using the wizard.. Which makes no sense to me either..

Maybe their needs to be a wizard for creating the user certs as well? So they show up in the export util..