Squid install failed post-upgrade
-
The package is fine, you have leftovers from an older install laying around like cmb said.
Try this:
1. Remove the package if any parts of it are left (including lightsquid and squidguard)
rm -rf /usr/local/etc/squid/3. Reinstall the package
-
The package is fine, you have leftovers from an older install laying around like cmb said.
Try this:
1. Remove the package if any parts of it are left (including lightsquid and squidguard)
rm -rf /usr/local/etc/squid/3. Reinstall the package
Yesss that did the trick, thank you so much mate, that was a huge relieve! :D
I got this thing after it, i am not sure if i should be bothered by it or not, for the time being i will just disregard it and try to configure the thing in a way that suit my needs, cheerio!
 -
Hello, I had similar issue after upgrading to the following right now:
2.3.1-RELEASE-p1 (i386)
built on Wed May 25 14:53:12 CDT 2016
FreeBSD 10.3-RELEASE-p3Installing pfSense-pkg-squid…
Updating pfSense-core repository catalogue...
pfSense-core repository is up-to-date.
Updating pfSense repository catalogue...
pfSense repository is up-to-date.
All repositories are up-to-date.
Checking integrity... done (0 conflicting)
The following 15 package(s) will be affected (of 0 checked):New packages to be INSTALLED:
pfSense-pkg-squid: 0.4.18 [pfSense]
squid_radius_auth: 1.10 [pfSense]
squid: 3.5.19 [pfSense]
krb5: 1.14.1 [pfSense]
pkgconf: 0.9.12_1 [pfSense]
cyrus-sasl: 2.1.26_12 [pfSense]
squidclamav: 6.14 [pfSense]
c-icap: 0.4.2,2 [pfSense]
c-icap-modules: 0.4.2_1 [pfSense]
clamav: 0.99.1 [pfSense]
unzoo: 4.4_2 [pfSense]
arc: 5.21p [pfSense]
lha: 1.14i_6 [pfSense]
arj: 3.10.22_4 [pfSense]
json-c: 0.12_2 [pfSense]The process will require 26 MiB more space.
[1/15] Installing pkgconf-0.9.12_1…
[1/15] Extracting pkgconf-0.9.12_1: ….... done
[2/15] Installing unzoo-4.4_2…
[2/15] Extracting unzoo-4.4_2: .. done
[3/15] Installing arc-5.21p…
[3/15] Extracting arc-5.21p: …... done
[4/15] Installing lha-1.14i_6…
[4/15] Extracting lha-1.14i_6: .. done
[5/15] Installing arj-3.10.22_4…
[5/15] Extracting arj-3.10.22_4: …....... done
[6/15] Installing json-c-0.12_2…
[6/15] Extracting json-c-0.12_2: …....... done
[7/15] Installing krb5-1.14.1…
[7/15] Extracting krb5-1.14.1: …....... done
[8/15] Installing cyrus-sasl-2.1.26_12…
*** Updated user `cyrus'.
[8/15] Extracting cyrus-sasl-2.1.26_12: …....... done
[9/15] Installing c-icap-0.4.2,2…
===> Creating users and/or groups.
Using existing group 'c_icap'.
Using existing user 'c_icap'.
[9/15] Extracting c-icap-0.4.2,2: …....... done
[10/15] Installing clamav-0.99.1…
===> Creating users and/or groups.
Using existing group 'clamav'.
Using existing group 'mail'.
Using existing user 'clamav'.
[10/15] Extracting clamav-0.99.1: …....... done
[11/15] Installing squid_radius_auth-1.10…
[11/15] Extracting squid_radius_auth-1.10: …. done
[12/15] Installing squid-3.5.19…
===> Creating users and/or groups.
Using existing group 'squid'.
Using existing user 'squid'.
===> Pre-installation configuration for squid-3.5.19
[12/15] Extracting squid-3.5.19: …......
pkg: cannot rename //usr/local/etc/squid/errors/zh-cn.ek6CT3z3fzsA to //usr/local/etc/squid/errors/zh-cn: Is a directory
[12/15] Extracting squid-3.5.19… done
[12/15] Deleting files for squid-3.5.19: …....... done
FailedHave performed the rm command like suggested above in Diagnostics - Command Prompt
Worked the magic. Was able to install Squid successfully after.Message from pfSense-pkg-squid-0.4.18:
Please visit Services - Squid Proxy Server menu to configure the package and enable the proxy.Cleaning up cache… done.
SuccessThank you!
Regards
Alex -
The package is fine, you have leftovers from an older install laying around like cmb said.
Try this:
1. Remove the package if any parts of it are left (including lightsquid and squidguard)
rm -rf /usr/local/etc/squid/3. Reinstall the package
thank you I am having the same issue
now installed the blacklist
i have blocked adult website and applied the settings,
after i go to porn.com or sex.com it still opens the website .can you advise why ?
-
Good day to All!
I am new to pfsense 2.3.1 and tried installing squid and squidguard packages but unfortunately I encountered errors.
I will appreciate any suggestions from you guys.
-
Good day to All!
I am new to pfsense 2.3.1 and tried installing squid and squidguard packages but unfortunately I encountered errors.
I will appreciate any suggestions from you guys.
Did you try any of the fixes suggested above?
A screenshot of the problem you encountered might be usefull -
I can't seem to install Squid 0.4.21 either. :-( I shouldn't have to do anything with the package dependencies listed should I?
.
.
.
[11/15] Extracting squid_radius_auth-1.10: …. done
[12/15] Installing squid-3.5.19…
===> Creating users and/or groups.
Using existing group 'squid'.
Using existing user 'squid'.
===> Pre-installation configuration for squid-3.5.19
[12/15] Extracting squid-3.5.19: …......
pkg: cannot rename //usr/local/etc/squid/errors/zh-cn.7rXRkYSRxZAI to //usr/local/etc/squid/errors/zh-cn: Is a directory
[12/15] Extracting squid-3.5.19… done
[12/15] Deleting files for squid-3.5.19: …....... done
Failed -
Hi Tac57, have you tried the suggested strings on the command line?
I was having the same problem, but after i applied that command it installed as it should -
Tried 'em all, no luck. :-(
-
pkg: cannot rename //usr/local/etc/squid/errors/zh-cn.7rXRkYSRxZAI to //usr/local/etc/squid/errors/zh-cn: Is a directory
That error was already covered previously in the thread, you need to clean up some leftovers from an old installation:
rm -rf /usr/local/etc/squid/ -
jimp thanks for inspiring me to try again. I swear I typed that command previously and it didn't work. :P
This time everything worked perfectly! :) I just successfully reinstalled squid 0.4.21.
Thanks again to everyone!
-TAC
