Removing pfblocker

BBcan177

Hi Melphiz,

You could also create a script to run on the pfSense box locally to collect those IPs.

You have to remember that pfBlockerNG doesn't block anything directly. All it does is collect IPs from the Threat Sources and creates Firewall Rules on the selected interfaces. All of the blocking/rejecting/permitting is done via pfSense Firewall Rules.

I believe that Google DNS is trying to re-route the Youtube blocking to other IPs. If you are using Unbound in 2.2, you should use it as a DNS Resolver (Not a forwarder), so it will use the Root DNS Servers for resolving DNS Requests. This will eliminate Google DNS from manipulating the DNS requests. There are other threads where you can get instructions on how to properly configure Unbound.

vronp

Hi,

I ran this check and the following remains:

<tab><text>General</text>
<url>/pkg_edit.php?xml=pfblocker.xml&id=0</url>
<active></active></tab>

@BBcan177:

Thanks lt1360hp,

I made a fix to remove those xml tags also.

If anyone else runs the script, they can run the following command after running the removal script to ensure it removed all the the old reminents of the previous version of pfblocker.
grep "pfblocker" /conf/config.xml | grep -v "pfblockerng" 

BBcan177

Hi vronp,

That's fine. That is just telling you that the last active menu tab was pfBlocker. If you click another menu item in pfSense and re-run the grep command it should clear that.

Seb

I tried running the script below on a server running 2.2.2 (without the pfBlocker package as it is not available for 2.2.x) where the config had been restored from a server with 2.1.5 and the pfBlocker package on and it didn't work: the config still had the pfBlocker config in… Output at the bottom of this post:

@BBcan177:

Here is a script to remove the previous pfBlocker package from the pfSense config.xml

So please make a full backup before proceeding. Please post back if you were successful in removing the old remnants of this package…

Save this script to /usr/local/www/removepfb.php

then from your pfSense GUI

https://x.x.x.x:yyy/removepfb.php

(Change x.x.x.x to your pfsense box IP and yyy to the port setting used.)

It will report to the screen with its activity.


# Script to Remove pfBlocker from Config.xml
#
# by BBCan177@gmail.com
# Copyright (c) 2015

require_once("pfsense-utils.inc");
require_once("config.inc");
require_once("services.inc");
global $config;
print "```
";

print "Removing pfBlocker from the pfSense Configuration file\n\n";
$removal = array("pfblocker", "pfblockerlists", "pfblockerafrica", "pfblockerantartica", "pfblockerasia", "pfblockereurope", "pfblockernorthamerica", "pfblockeroceania", "pfblockersouthamerica", "pfblockertopspammers");
foreach ($removal as $remove){
        if (is_array($config['installedpackages'][$remove])){
                unset ($config['installedpackages'][$remove]);
                print "Removed {$remove}\n";
        }
}

# Remove pfBlocker Menu Entry
$pfb_menus = &$config['installedpackages']['menu'];
if (!empty($pfb_menus)) {
        $key = 0;
        foreach ($pfb_menus as $menu) {
                if ($menu['name'] == "pfBlocker") {
                        unset ($pfb_menus[$key]);
                        print "Removed pfBlocker Menu Entry\n";
                }
                $key++;
        }
}

# Remove pfBlocker Package Entry
$pfb_pkg = &$config['installedpackages']['package'];
if (!empty($pfb_pkg)) {
        $key = 0;
        foreach ($pfb_pkg as $pkg) {
                if ($pkg['name'] == "pfBlocker") {
                        unset ($pfb_pkg[$key]);
                        print "Removed pfBlocker Pkg Entry\n";
                }
                $key++;
       }
}

# Remove Widget
$pfb_widgets = $config['widgets']['sequence'];
if (!empty($pfb_widgets)) {
        $widgetlist = explode(",", $pfb_widgets);
        foreach ($widgetlist as $key => $widget) {
                if (strstr($widget, "pfBlocker-container")) {
                        unset($widgetlist[$key]);
                        break;
                }
        }
        $config['widgets']['sequence'] = implode(",", $widgetlist);
}

#Remove any pfBlocker alias tables
if (is_array($config['aliases']['alias'])){
        foreach($config['aliases']['alias'] as $alias){
                if (!preg_match("/^pfBlocker/", $alias['name'])) {
                        $new_aliases[]= $alias;
                }
        }
        $config['aliases']['alias'] = $new_aliases;
}

# Remove pfBlocker Files/Folders
unlink_if_exists ("/usr/local/pkg/pfblocker.inc");
unlink_if_exists ("/usr/local/pkg/pfblocker.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_Africa.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_Asia.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_Europe.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_NorthAmerica.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_Oceania.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_SouthAmerica.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_lists.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_sync.xml");
unlink_if_exists ("/usr/local/pkg/pfblocker_topspammers.xml");

unlink_if_exists ("/usr/local/www/pfblocker.php");
unlink_if_exists ("/usr/local/www/widgets/widgets/pfBlocker.widget.php");

unlink_if_exists ("/usr/local/pkg/Africa_cidr.txt");
unlink_if_exists ("/usr/local/pkg/Asia_cidr.txt");
unlink_if_exists ("/usr/local/pkg/Europe_cidr.txt");
unlink_if_exists ("/usr/local/pkg/Oceania_cidr.txt");
unlink_if_exists ("/usr/local/pkg/South_America_cidr.txt");

rmdir_recursive ("/usr/local/pkg/pfblocker");
rmdir_recursive ("/usr/local/pkg/pfblocker_aliases");

exec ("/bin/rm /var/db/aliastables/pfBlocker*.*");

# Remove Cron Task
install_cron_job("pfblocker.php cron", false);

# Save Configuration
write_config("Removed pfBlocker");
?>

The output for me was:

Removing pfBlocker from the pfSense Configuration file

Removed pfblocker
Removed pfblockerlists
Removed pfblockertopspammers
Removed pfBlocker Menu Entry

Fatal error: Call to undefined function getUserEntry() in /etc/inc/config.lib.inc on line 501

Should I just remove the config manually using the nested grep example BBcan177 gave?

grep "pfblocker" /conf/config.xml | grep -v "pfblockerng"

Seb

P.S. The script removed nothing as far as I could tell: the pfBlocker rules were still present and the menu entry was still present.

BBcan177

It won't remove the rules but it should remove the menu entry. Is this a full install version of pfSense. Might need to put the system into RW mode to save the changes if it's a nano/flash type version.

mloiterman

greping the config file still shows 'pfblockersync'. Should that be there?

BBcan177

@mloiterman:

greping the config file still shows 'pfblockersync'. Should that be there?

Thanks for pointing that out. I can't edit my original post, but please edit the script to include "pfblockersync" as follows:

Original

$removal = array("pfblocker", "pfblockerlists", "pfblockerafrica", "pfblockerantartica", "pfblockerasia", "pfblockereurope", "pfblockernorthamerica", "pfblockeroceania", "pfblockersouthamerica", "pfblockertopspammers");

New

$removal = array("pfblocker", "pfblockerlists", "pfblockerafrica", "pfblockerantartica", "pfblockerasia", "pfblockereurope", "pfblockernorthamerica", "pfblockeroceania", "pfblockersouthamerica", "pfblockertopspammers", "pfblockersync");

glenewhittenberggmail.co

script saved me. upgraded from 2.2.4 to 2.3.1 and pfblocker broke. Tried remove and reinstall no go. was able to get to router but not out to internet. ran script, rebooted, and all my problems are gone. Thanks!

yuljk

Just tried running this - after copying the script to my pfsense VM.

I ran the script from Chrome and it just outputs 'Removing pfBlocker from the pfSense Configuration file'

Where exactly am I executing the script from?

Thanks

RonpfS

The script is outdated.

RonpfS

To install or re-install pfBlockerNG 2.1.1_2
https://forum.pfsense.org/index.php?topic=102470.msg647719#msg647719

Then you can install or re-install the pfBlockerNG 2.1.1_2.
The install should update the MaxMind (this take 5+ minutes) and proceed to completion.

Then you can remove the package

yuljk

Many thanks for the new fix.

I have attempted a new install after modifying config.inc. However the pfBlockerng entry under my firewall menu is not visible.

Installation log:-

Installing pfSense-pkg-pfBlockerNG…
Updating pfSense-core repository catalogue...
pfSense-core repository is up-to-date.
Updating pfSense repository catalogue...
pfSense repository is up-to-date.
All repositories are up-to-date.
Checking integrity... done (0 conflicting)
The following 6 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
pfSense-pkg-pfBlockerNG: 2.1.1_2 [pfSense]
whois: 5.1.5 [pfSense]
GeoIP: 1.6.9 [pfSense]
lighttpd: 1.4.39_1 [pfSense]
grepcidr: 2.0 [pfSense]
aggregate: 1.6_1 [pfSense]

Number of packages to be installed: 6

The process will require 2 MiB more space.
[1/6] Installing whois-5.1.5…
[1/6] Extracting whois-5.1.5: …....... done
[2/6] Installing GeoIP-1.6.9…
[2/6] Extracting GeoIP-1.6.9: …....... done
[3/6] Installing lighttpd-1.4.39_1…
[3/6] Extracting lighttpd-1.4.39_1: …....... done
[4/6] Installing grepcidr-2.0…
[4/6] Extracting grepcidr-2.0: ….. done
[5/6] Installing aggregate-1.6_1…
[5/6] Extracting aggregate-1.6_1: …. done
[6/6] Installing pfSense-pkg-pfBlockerNG-2.1.1_2…
[6/6] Extracting pfSense-pkg-pfBlockerNG-2.1.1_2: …....... done
Saving updated package information...
done.
Loading package configuration... done.
Configuring package components...
Loading package instructions...
Custom commands...
Executing custom_php_install_command()...
MaxMind GeoIP databases previously downloaded.
Adding pfBlockerNG Widget to the Dashboard... done.
Remove any existing and create link for DNSBL lighttpd executable... done.
Creating DNSBL web server start-up script... done.
Upgrading Adv. Inbound firewall rule settings ... no changes required ... done.
Custom commands completed ... done.
Executing custom_php_resync_config_command()...pkg: POST-INSTALL script failed
Message from GeoIP-1.6.9:
GeoIP does not ship with the actual data files. You must download
them yourself! Please run:

/usr/local/bin/geoipupdate.sh

Cleaning up cache... done.
Success

Immediately after install I get a crash report:-

Crash report begins. Anonymous machine information:

amd64
10.3-RELEASE-p5
FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
[14-Aug-2016 14:42:20 Europe/London] PHP Fatal error: Allowed memory size of 536870912 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3874
[14-Aug-2016 14:42:20 Europe/London] PHP Stack trace:
[14-Aug-2016 14:42:20 Europe/London] PHP 1. {main}() /etc/rc.start_packages:0
[14-Aug-2016 14:42:20 Europe/London] PHP 2. sync_package() /etc/rc.start_packages:90
[14-Aug-2016 14:42:20 Europe/London] PHP 3. eval() /etc/inc/pkg-utils.inc:631
[14-Aug-2016 14:42:20 Europe/London] PHP 4. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3
[14-Aug-2016 14:42:20 Europe/London] PHP 5. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3874

Pfsense 2.3.2 running on ESXi 6 VM with 2GB RAM and 4vCPUs

Many thanks

digdug3


// Set memory limit to 512M on amd64.
if ($ARCH == "amd64") {
	ini_set("memory_limit", "512M");
} else {
	ini_set("memory_limit", "256M");
}

You are using the AMD64 version, try to increase to 768M:


if ($ARCH == "amd64") {
	ini_set("memory_limit", "768M");
} else {
	ini_set("memory_limit", "256M");
}

Or wait until BBCan releases the fix

RonpfS

To increase memory_limit over 512M you also need to fix /usr/local/etc/php.ini, /etc/rc.php_ini_setup