PfBlockerNG v2.1 w/TLD

blueduckdock

@blueduckdock:

Trying to figure out pfblocker on CARP….

I've used this extensively on single installs but not via CARP. Are there any considerations I should take into account? I was told by pfsense support when I first installed that firewalls should mirror (ie. have pfblocker installed on both, etc.)
Am I ok to configure FW1 on 10.0.10.1 with whatever pfblocker stuff I want then simply sync to 10.0.10.2 (FW2?) I don't have to worry about the CARP interface or sync issues between this package and that right (let's say CARP interface is on 10.0.10.250)

Hi blueduckdock,

You can use CARP/HA in pfSense without issue. The package has an XMLRPC sync Tab that allows for the configuration of the package to be sync'd to other boxes… But with the current DNSBL code, this will cause issues with the DNSBL VIP, as both pfSense boxes will have the same DNSBL VIP address..

I had one user several months ago ask if this could be addressed and I did create a patch to get this addressed... If you are able to test it out, shoot me a PM if that works for you...

Yeah, I saw that post about DNSBL. Sucks because that's a big part of what I'm looking for with this.

Unfortunately I cannot test on that (it's prod.) If I get to it, I'll try to set either my home up with CARP (was thinking about doing it in the future between proxmox and physical anyway) or at least two pfsense VMs in my homelab.

I will let you know as I'd like to test it and help out. I've used pfblocker for so long it's the least I can do.

Thanks BBcan

BBcan177

@blueduckdock:

Yeah, I saw that post about DNSBL. Sucks because that's a big part of what I'm looking for with this.

Unfortunately I cannot test on that (it's prod.) If I get to it, I'll try to set either my home up with CARP (was thinking about doing it in the future between proxmox and physical anyway) or at least two pfsense VMs in my homelab.

I will let you know as I'd like to test it and help out. I've used pfblocker for so long it's the least I can do.

Thanks BBcan

Thanks, if/when you have a test environement setup, shoot me a PM and we can go from there!

I've used pfblocker for so long it's the least I can do.

Thanks, I appreciate that! ;)

tonymorella

Running the latest 2.1.1_4

When force updates via the GUI all control is lost but I can see the updates. The only way to get it back is to ssh and reset using 11 and 16, or close the browser and wait a while before login back in. If I run the updates via console do not have the same issue, I think it's has something to do with the live logs.

Thanks
Tony

BBcan177

@tonymorella:

Running the latest 2.1.1_4

When force updates via the GUI all control is lost but I can see the updates. The only way to get it back is to ssh and reset using 11 and 16, or close the browser and wait a while before login back in. If I run the updates via console do not have the same issue, I think it's has something to do with the live logs.

Your back from the netherworld ;)

With the change to NGINX, the "View" button in the Update Tab is not working 100% …. I have that on the list of things to fix, but it might be removed from future releases as I don't think there is a good resolution for that one...

RonpfS

@tonymorella:

Running the latest 2.1.1_4

When force updates via the GUI all control is lost but I can see the updates. The only way to get it back is to ssh and reset using 11 and 16, or close the browser and wait a while before login back in. If I run the updates via console do not have the same issue, I think it's has something to do with the live logs.

Thanks
Tony

It's just your browser that is sometimes unable to open any connections to the FW FQDN when you run Force Update. You can still access the FW in another tab using the FW IP, or with another browser, or from another computer.

BBcan177

Malvertising in Action:

Published on Sep 1, 2016
Exploit kits are a class of threat that indiscriminately attempt to compromise all users. Malicious advertisements, or malvertising, are a common vector adversaries use to try and redirect users to an exploit kit.

https://www.youtube.com/watch?v=-E56rSF01no&feature=youtu.be

ToxIcon

Hi all
I am looking for some IP/DNSBL blocklist / blacklist with very small false positive and was wondering from your experience with using different block lists which one would you recommend.

Thanks in advance for taking the time to respond.

renegade

can someone help me on that:
i bave many firewall log entries like

Sep 26 11:05:04 LAN 10.0.0.80:45511 127.0.0.1:8443

why is it blocked by pfblock rule?
and why 127.0.0.1??

BBcan177

@renegade:

can someone help me on that:
i bave many firewall log entries like

Sep 26 11:05:04 LAN 10.0.0.80:45511 127.0.0.1:8443

why is it blocked by pfblock rule?
and why 127.0.0.1??

Goto the General tab, and enable "Suppression", the Force Reload - All…. This will remove all RFC1918 and loopback addresses...

renegade

Okay thank you. Did that 8)

ledj

Is it possible to use some of the paid databases from Maxmind with pfBlockerNG ? (other than GeoLite2)

And if possible, how ?

BBcan177

@ledj:

Is it possible to use some of the paid databases from Maxmind with pfBlockerNG ? (other than GeoLite2)

And if possible, how ?

Hi, I have not tested it, but if you do have a paid subscription, I would think that they would give you an API key that could be added to the MaxMind URL…

You could manually edit the URL in /usr/local/www/pfblockerng/pfblockerng.php

https://github.com/pfsense/FreeBSD-ports/blob/devel/net/pfSense-pkg-pfBlockerNG/files/usr/local/www/pfblockerng/pfblockerng.php#L52

And adjust the MaxMind cron task to run once a week (I think thats the update freq. of the paid subscription database).

https://github.com/pfsense/FreeBSD-ports/blob/devel/net/pfSense-pkg-pfBlockerNG/files/usr/local/pkg/pfblockerng/pfblockerng.inc#L5303

LIGISTX

@RonpfS:

http://10.10.10.1:8443 return a gif

It should be https://10.10.10.1:443 but that doesn't return and doesn't it log to dnsbl.log either.

Sorry guys if this is dumb, or I missed something obvious. I am power reading as much as I can possibly stand (eyes starting to hurt) about PFBNG, and I came across this and from my understanding from previous reading, this site should be blocked via all of the settings I have… I think?

I navigated to https://10.10.10.1:443 in chrome and got the "Your connection is not private" warning, not a Gif. This tells me something isn't working correct. I am not even sure where to start with my question, so I will start at the obvious:

This does mean something isn't working, correct? If so, what exactly may that be?

Once again, just trying to get my feet wet and start actually using pfsense for what its worth, I have had my box deployed for about a month now with no packages running, and for better or worse this was my first package to try!

Edit

Also, is there a list somewhere of all of the available DNSBL Feeds? I have read through lots of pages and have input all of BBCan's lists that I have found, I didn't document them.... and I am not sure how to printout a list of all that are currently running on my pfsense box. Like I said, pretty noob, but very interested in learning :)

I guess to this same question, like I said, I haven't kept a list, would it be an issue to have the same feed in multiple groups? I don't think this has happened, but without keeping valiant records of what I have added, it would be hard to even figure this out unless there is a way to show what all has been loaded and running (I assume there is a way to do this).

And what I have seen BBCan117 write SO MANY times is, its better not to block the world, still trying to figure out exactly how to do that...

Also, what I can say, I am somewhat happy I started using this, finally using the 8 GBs of RAM I put in this box! Up to almost 70% utalization, before PFBNG I was at ~2% LOL!

BBcan177

See the following:
https://forum.pfsense.org/index.php?topic=119954.msg663601#msg663601

LIGISTX

@BBcan177:

See the following:
https://forum.pfsense.org/index.php?topic=119954.msg663601#msg663601

Ok. Well, maybe it is ok. I pulled up 10.10.10.1:443 on my iPad s and just allowed it to show the website. The iPad tab in chrome did say "1x1 pixel". So I am thinking this means it actually is working, I doubt the chrome tab would say 1x1 pixel on its own lol.

LIGISTX

Edited, I think I have figured out my issue, it was a dumb question in the first place :-[

BluBoy

I just wanted to ask if I can (ab)use the GeoIP data in PFBlocker.

I'm currently using it to drop outbound traffic to certain countries.
I'd also like to set up multiple aliases, so I can route traffic to certain other countries via a designated interface.

Is this possible?

BBcan177

@BluBoy:

I just wanted to ask if I can (ab)use the GeoIP data in PFBlocker.

I'm currently using it to drop outbound traffic to certain countries.
I'd also like to set up multiple aliases, so I can route traffic to certain other countries via a designated interface.

Is this possible?

You can goto the IPv4/6 Tab and create any combination of GeoIP aliases… Click the blue infoblock icons for further details... You can also use "Alias type" settings which will allow you to manually create your firewall rules and add the GeoIP Aliases as required.

pftdm007

How do you guys block these annoyings youtube ads popping up before the video playback starts or worst are showing up randomly during playback?

This is weird, I am not seeing any form or kind of advertisement on my computers, but on our android devides we see those. Two examples:

https://youtu.be/weyiTnwtGrk
https://youtu.be/d-AH_IEnLIg

Damn I hate those!

I currently maintain a decent list of DNSBL ads feeds but for whatever reasons the ads are getting by.

http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
http://hosts-file.net/ad_servers.txt
https://adaway.org/hosts.txt
http://sysctl.org/cameleon/hosts
http://winhelp2002.mvps.org/hosts.txt

shonjir

Hi, BBcan -

First, I'd like to thank you for this excellent tool!

I've been testing out the TLD feature with version 2.1.1_6 with a set of DNSBL lists totaling more than 600k domains. It's working really well, but as you explained it uses a lot of memory.

I think the memory situation could be improved significantly if deduplication could be improved to identify redundant subdomains that don't have a corresponding higher level domain in the list.

I've noticed that some of the larger lists I'm using (for example, hosts-file.net) contains large numbers of domains with randomly generated third, fourth, or fifth level subdomains. Other than Bambanek's DGA list (all 2nd level) most of the generated names are third level or below.

There are a few methods I can think of that this could be implemented.

The easiest method would be to simply truncate subdomains lower than a certain level (say, second, third or fourth) before deduplication. This would be relatively fast and should work relatively well. A configuration option could allow the user to determine how aggressively to apply this. More aggressive truncation would result in substantially shorter lists.

Another way is to dynamically by count the number of subdomains for each higher level domain, and if the count is greater than some configurable threshold replacing subdomains with the higher level domain. This would take more processing but could be a way to identify domains that could be replaced by a wildcard.