Resolved: T-Mobile CellSpot connectivity issues
-
This is from one I have access to. It's on 2.3.1_5. The port 500 state is long gone.
LAN udp 208.54.66.205:4500 <- 172.24.128.198:4500 MULTIPLE:MULTIPLE 5.199536 M / 6.616718 M 1.00 GiB / 963.63 MiB
WAN udp OUTSIDE_IP:18887 (172.24.128.198:4500) -> 208.54.66.205:4500 MULTIPLE:MULTIPLE 5.199536 M / 6.616718 M 1.00 GiB / 963.63 MiBShe says it's working fine. It took a LONG time to finally sync up so if you have good, two-way traffic on UDP 4500 (indicated by MULTIPLE:MULTIPLE and increasing counters in both directions) I would let it do its thing for a while.
-
they said there is no response from the CellSpot when its behind the router as port 4500 is blocked.
Geniuses. Of course it's blocked to unsolicited inbound traffic. That's why it makes OUTBOUND connections on 4500 (ESP NAT-T).
I would let it sit. It looks like it has what it needs. Patience.
-
It has been sitting on it since last 24 hours :D
New connections are like this for a while.
VOIP udp 10.2.1.16:4500 -> 208.54.90.23:4500 NO_TRAFFIC:SINGLE 1 / 0 29 B / 0 B
-
Like Derelict said- get rid of the port forwards. I generally build a firewall rule on the WAN that shows source (AT&T network) and destination (range where we have all the cellspots) but its not necessary. I found it helps in the rare instance where the firewall was dropping the cellspot states for whatever reason. But no port forwards!
Is your cellspot assigned an address in your static DHCP table? If so change its address to something else and let it try again. Or if its not- assign it an address to grab that is not what it is now. See if that helps.
-
This is from one I have access to. It's on 2.3.1_5. The port 500 state is long gone.
LAN udp 208.54.66.205:4500 <- 172.24.128.198:4500 MULTIPLE:MULTIPLE 5.199536 M / 6.616718 M 1.00 GiB / 963.63 MiB
WAN udp OUTSIDE_IP:18887 (172.24.128.198:4500) -> 208.54.66.205:4500 MULTIPLE:MULTIPLE 5.199536 M / 6.616718 M 1.00 GiB / 963.63 MiBShe says it's working fine. It took a LONG time to finally sync up so if you have good, two-way traffic on UDP 4500 (indicated by MULTIPLE:MULTIPLE and increasing counters in both directions) I would let it do its thing for a while.
That's the issue. The counters do not increase. Some small bytes and then the connection is reset by the CellSpot as it tries a new server. I used to see the counters increase with good traffic on the older versions but haven't see them since moving to v.2.3.2
-
Like Derelict said- get rid of the port forwards. I generally build a firewall rule on the WAN that shows source (AT&T network) and destination (range where we have all the cellspots) but its not necessary. I found it helps in the rare instance where the firewall was dropping the cellspot states for whatever reason. But no port forwards!
Is your cellspot assigned an address in your static DHCP table? If so change its address to something else and let it try again. Or if its not- assign it an address to grab that is not what it is now. See if that helps.
Did all this many times since last week :)
Its on a fresh build with default settings. No changes and no NAT port forwards. I usually assign an IP address and have even moved it to different networks from VoIP network to LAN and let it acquire its own IP address. Even created an alias with T-Mobile network and gave it top preference on the rules. Saw the initial small bytes of communications and then nothing. None of this helped.
-
Dude. It's not the firewall unless you broke it trying to "fix" it. Maybe undo everything you have done and restart the cell spot. when I was at her house I got tired of waiting but the states looked good so I left. She called me a few hours later and said it was up.
-
Did you pay your bill?
-
Does it have a good GPS lock? My Verizon unit will not attempt a connection unless the GPS is working.
-
We had to be sure the GPS antenna was in a window too.
-
Dude. It's not the firewall unless you broke it trying to "fix" it. Maybe undo everything you have done and restart the cell spot. when I was at her house I got tired of waiting but the states looked good so I left. She called me a few hours later and said it was up.
As I said, it's on a fresh install with default settings. I did reset the CellSpot and when it worked I did see a large download on the CellSpot so I new it was doing it's thing. But that was an increase in counters and traffic graphs showed the data as well. Right now it hasn't moved more than 1.24MB of data since last 4 hours. Did multiple resets (rest to default and not just power reset) on the CellSpot. T-Mobile sent me a replacement which is behaving the exact same manner. Runs fine directly behind the modem but fails behind the router.
I have been suspecting DNS Resolver but it hasn't given issues to all my other network. May be T-Mobile is using some weird IP address that the DNS is not able to resolve even with DNS forwarding option. Just shooting in the dark as I am running out of options and its getting frustrating as I barely have any cell signal inside the house and this CellSpot is used by 4 lines in the family.
-
Does it have a good GPS lock? My Verizon unit will not attempt a connection unless the GPS is working.
Yeah its sitting right next to the window with the GPS connected. The power light (and that's the only light) keeps blinking and it doesn't even go the next step of acquiring a GPS signal. When behind the modem, I can see the network cable lights blink rapidly and it still acquires a GPS signal though after a good 15-20 mins) down in the basement. All lights turn solid green with 4G LTE blinking on data. But when behind the router just the power light blinks and blinks and blinks.. :D
-
Current states.. You can see its trying to connect to a different server. Also look at the Bytes.
-
Made some progress, I think.
I let it sit behind the modem to update itself. Everything looked good. Then I moved it behind the router with the updated software. This time the power light (green) and the Internet (orange) light blinks with a steady GPS light. Orange meaning an issue.
I suspect it's not able to talk to the outside world due to DNS issue. How do I troubleshoot the DNS resolver? Weird is that the cellphones use the same network on WiFi and don't have any issues. They all point to 10.2.1.1.
-
It is locating its destination address as shown by the fact it is actually connected to the server by what is shown in your state table. If you had DNS problems it wouldn't be able to locate the servers.
My guess is that something is screwing up the VPN packets somehow.
Your connected using a wired connection? Un-managed switch?
-
Yes wired connection. Managed switch as I have several VLANs. But no changes on the switch since last 4 years. Same VLAN used by 4 cellphones and 1 VoIP sip hone.
-
Looks like good two-way traffic to me.
-
Orange Internet light means it does not have an internet connection or unable to talk to the internet.
-
Orange Internet light means it does not have an internet connection or unable to talk to the internet.
They really need to re-write their guide.
Is the light flashing or solid?
-
Have you tried a different Ethernet cable? Solid light would seem to indicate no connection to your switch..
