New Traffic Totals package available for testing

pwnell

Aha now I see. I had to first disable it, then enable it, and only then did it add the vnstat cron entry. Before I explicitly disabled it and reenabled it, the crontab entry was not there. After I initially installed the package, it was enabled by default. Perhaps a small bug?

Thanks!

jdillard

Did you have vnStat already installed before you messed with the Traffic Totals package?

pwnell

Quite possible as I had vnstat2 installed, then upgraded from 2.1 to 2.2 before, which dropped support for vnstat2. I never cleaned it out manually.

johnpoz

So I on accident deleted the vnstat cron job. Not I can seem to get it back.. I have reinstalled the package, I have deleted the package and then reinstalled. No cron. I have disabled the cumulative graphing and then re-enabled it.. Nothing. Reset all graph data.. Just not seem to put this cron job back in??

I can manually put back, but shouldn't a reinstall of the package check that the cron is there. Or a turn off and back on of the cumulative put it back, etc..?

jdillard

@johnpoz:

I can manually put back, but shouldn't a reinstall of the package check that the cron is there. Or a turn off and back on of the cumulative put it back, etc..?

It should, that's odd behavior that it won't add a cron on re-install. I'll have to look into it, it's related to #14 on the known issues list.

johnpoz

Well I can leave it as and see if it shows up when new version comes out, etc.

maverick_slo

Hello!

Are any updates planned to make it to release that will happen soon?
Like correct iface names :) ?

Thanks!

drathus

@jdillard:

#9a) NanoBSD image is untested at this time, but should work. Data loss after a reboot needs to also be tested (actually, I may be able to tie the data into backups).

Running on a modified Firebox, and I can confirm that it works on a nanoBSD image. However, yes, it's losing all data on reboot.

Edit: punctuation

jdillard

@maverick_slo:

Hello!

Are any updates planned to make it to release that will happen soon?
Like correct iface names :) ?

Thanks!

I've been tied up with a roll out, but hope to have more time soon to get some fixes/features in.

jdillard

@drathus:

@jdillard:

#9a) NanoBSD image is untested at this time, but should work. Data loss after a reboot needs to also be tested (actually, I may be able to tie the data into backups).

Running on a modified Firebox, and I can confirm that it works on a nanoBSD image. However, yes, it's losing all data on reboot.

Edit: punctuation

Thanks for confirming! I plan to mimic what is done for the RRD graphs as fas as data retention goes, but I'm not sure how involved that is quite yet.

drathus

@jdillard:

Thanks for confirming! I plan to mimic what is done for the RRD graphs as fas as data retention goes, but I'm not sure how involved that is quite yet.

How would you recommend manually backing up the vnstat database & configuration settings so if I do have to reboot my pfsense box I don't lose my historic data?

baggar11

I've noticed that there isn't a proper separation of totals for openvpn clients. I have 2 clients and they both show the same totals as WAN. Openvpn server does seem to have its own totals though. Does traffic totals have a limitation in this regard?

gadean

@drathus i've "solved" this with two scripts and cron - it's not the best solution but it works

#!/bin/sh

if [ -d "/var/db/vnstat" ]; then
  cd / && tar -czf /cf/conf/vnstat.tgz /var/db/vnstat/*
fi

#!/bin/sh

if [ -d "/var/db" ]; then
  cd / && tar -xzf /cf/conf/vnstat.tgz
fi

0       */1     *       *       *       root    /etc/rc.backup_vnstat.sh
@reboot                                 root    /etc/rc.restore_vnstat.sh

TomT

Hi

Where do I get this to try ?
I don't see it in my packages

Thanks

gadean

The package name is "Status_Traffic_Totals".

infernoman

Is there any way to get this to enable by default? every time the machine is restarted it seems to stop the logging. and delete any trace of the logs.

gadean

Are you using the ram disk? then you could try this on: https://forum.pfsense.org/index.php?topic=114753.msg664804#msg664804

Under "Status" / "Traffic Totals" click on "Display Advanced" -> "Enable Graphing" and "Save as Default"

chrcoluk

why not just use the drive pfsense is installed on? my pfsense is installed on a 60 gig ssd, plenty of space for storing this sort of data :)

pfSenpai

@jdillard:

Known issues:

#1) There is an issue with the stacked bar graph. Documented here: https://github.com/novus/nvd3/issues/341#issuecomment-222370991

I believe I may have found another bug that only occurs with the stacked bar graph. I have been collecting data for a couple of days now and all totals look fine except with stacked bars (see image): for some reason the (rx) values are displayed as KiB instead of GiB and the resulting higher values seem to hit a type related cap and show up as negatives .

This is from a pfSense 2.3.2 (latest) on an ALIX APU.1D4.

Edit: This only occurs with inverse mode on. Btw. would it be possible to save defaults for Hourly and Daily etc. separately?

Status_Traffic_Totals-Stacked-Bars.PNG_thumb

chrcoluk

I observed on my pfSense box that openvpn traffic is been reported the same as WAN traffic. To me this isnt a big deal as I only care about monitoring my WAN usage, but I am reporting here. It is not exactly the same as in 1:1 but is very close to the WAN figures.

The only actual traffic on my openvpn (since I still am only testing it on pfSense) is an idle ssh session to one server.