ERROR: It was not possible to identify which pfSense kernel is installed

[jimp]

Until a week or so ago there were some corner cases like ZFS where the difference in how/when the disk was mounted stopped the code from working as expected.

On current snaps it should be OK all-around.

[doktornotor]

OK, thanks. ;)

[hda]

@jimp:

Actually you could reinstall the packages to get back to a good state:

[2.4.0-BETA][root@apu2b2.localdomain]/root: pkg install pfSense pfSense-base pfSense-default-config pfSense-kernel-pfSense pfSense-rc pfSense-repo pfSense-upgrade
Updating pfSense-core repository catalogue...
Fetching meta.txz: 100%    940 B   0.9kB/s    00:01
Fetching packagesite.txz: 100%    2 KiB   1.8kB/s    00:01
Processing entries: 100%
pfSense-core repository update completed. 7 packages processed.
Updating pfSense repository catalogue...
Fetching meta.txz: 100%    940 B   0.9kB/s    00:01
Fetching packagesite.txz: 100%  120 KiB 122.6kB/s    00:01
Processing entries: 100%
pfSense repository update completed. 441 packages processed.
The following 149 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
        pfSense: 2.4.0.b.20170116.1330 [pfSense]
        pfSense-base: 2.4.0.b.20170116.1536 [pfSense-core]
        pfSense-default-config: 2.4.0.b.20170116.1536 [pfSense-core]
        pfSense-kernel-pfSense: 2.4.0.b.20170116.1536 [pfSense-core]
        pfSense-rc: 2.4.0.b.20170116.1536 [pfSense-core]
        pfSense-repo: 2.4.0.b.20170116.1330 [pfSense]
        pfSense-upgrade: 0.12 [pfSense]
        libxml2: 2.9.4 [pfSense]
        clog: 1.0.1 [pfSense]
        dpinger: 2.0 [pfSense]
        php56-pdo_sqlite: 5.6.29 [pfSense]
        php56-pdo: 5.6.29 [pfSense]
        php56: 5.6.29 [pfSense]
        pcre: 8.39_1 [pfSense]
        sqlite3: 3.15.1_1 [pfSense]
        readline: 6.3.8 [pfSense]
        indexinfo: 0.2.6 [pfSense]
        expiretable: 0.6_1 [pfSense]
        libltdl: 2.4.6 [pfSense]
        smartmontools: 6.5_1 [pfSense]
        php56-mbstring: 5.6.29 [pfSense]
        oniguruma5: 5.9.6_1 [pfSense]
        ipmitool: 1.8.17_1 [pfSense]
        php56-json: 5.6.29 [pfSense]
        php56-sysvshm: 5.6.29 [pfSense]
        pecl-radius: 1.4.0.b1 [pfSense]
        php56-bz2: 5.6.29 [pfSense]
        isc-dhcp43-server: 4.3.5 [pfSense]
        beep: 1.0_1 [pfSense]
        pear-Net_Growl: 2.7.0 [pfSense]
        pear: 1.10.1 [pfSense]
        php56-zlib: 5.6.29 [pfSense]
        php56-xml: 5.6.29 [pfSense]
        bwi-firmware-kmod: 3.130.20 [pfSense]
        ca_root_nss: 3.28.1 [pfSense]
        mpd5: 5.8 [pfSense]
        php56-hash: 5.6.29 [pfSense]
        mobile-broadband-provider-info: 20151214 [pfSense]
        bind-tools: 9.11.0P2 [pfSense]
        idnkit: 1.0_6 [pfSense]
        json-c: 0.12.1 [pfSense]
        libedit: 3.1.20150325_2,1 [pfSense]
        php56-mcrypt: 5.6.29 [pfSense]
        libmcrypt: 2.5.8_3 [pfSense]
        pear-XML_RPC2: 1.1.3 [pfSense]
        php56-curl: 5.6.29 [pfSense]
        curl: 7.52.1_1 [pfSense]
        libnghttp2: 1.18.0 [pfSense]
        pear-Cache_Lite: 1.7.16,1 [pfSense]
        pear-HTTP_Request2: 2.3.0,1 [pfSense]
        pear-Net_URL2: 2.2.1 [pfSense]
        pear-Mail: 1.3.0,1 [pfSense]
        pear-Net_SMTP: 1.7.2 [pfSense]
        pear-Net_Socket: 1.0.14 [pfSense]
        check_reload_status: 0.0.8 [pfSense]
        libevent2: 2.0.22_1 [pfSense]
        ataidle: 2.7.2 [pfSense]
        php56-tokenizer: 5.6.29 [pfSense]
        minicron: 0.0.2 [pfSense]
        dhcp6: 20080615.1 [pfSense]
        php56-ctype: 5.6.29 [pfSense]
        openvpn: 2.4.0 [pfSense]
        lzo2: 2.09 [pfSense]
        liblz4: 131 [pfSense]
        ntp: 4.2.8p9_1 [pfSense]
        libwww: 5.4.0_6 [pfSense]
        gettext-runtime: 0.19.8.1_1 [pfSense]
        pecl-zmq: 1.1.3_2 [pfSense]
        libzmq4: 4.1.5 [pfSense]
        norm: 1.5r6 [pfSense]
        libsodium: 1.0.11_1 [pfSense]
        ssh_tunnel_shell: 0.1_1 [pfSense]
        php56-simplexml: 5.6.29 [pfSense]
        cpdup: 1.18 [pfSense]
        pear-Net_IPv6: 1.3.0.b2_2 [pfSense]
        miniupnpd: 1.9.20160113,1 [pfSense]
        pecl-ssh2: 0.13 [pfSense]
        libssh2: 1.8.0,2 [pfSense]
        sshlockout_pf: 0.0.2 [pfSense]
        pfSense-Status_Monitoring: 1.6.0_2 [pfSense]
        pecl-rrd: 1.1.3_4 [pfSense]
        rrdtool: 1.6.0_1 [pfSense]
        perl5: 5.24.1.r4_1 [pfSense]
        glib: 2.46.2_4 [pfSense]
        python27: 2.7.13_1 [pfSense]
        libffi: 3.2.1 [pfSense]
        libiconv: 1.14_10 [pfSense]
        pear-Auth_RADIUS: 1.1.0 [pfSense]
        radvd: 1.9.1 [pfSense]
        libdaemon: 0.14_1 [pfSense]
        unbound: 1.6.0 [pfSense]
        expat: 2.2.0_1 [pfSense]
        ldns: 1.6.17_5 [pfSense]
        isc-dhcp43-relay: 4.3.5 [pfSense]
        dhcpleases: 0.3_1 [pfSense]
        php56-opcache: 5.6.29 [pfSense]
        php56-dom: 5.6.29 [pfSense]
        gogoc: 1.2_1 [pfSense]
        wol: 0.7.1_3 [pfSense]
        php56-xmlwriter: 5.6.29 [pfSense]
        choparp: 20150613 [pfSense]
        nginx: 1.10.2_3,2 [pfSense]
        luajit: 2.0.4_1 [pfSense]
        dnsmasq: 2.76,1 [pfSense]
        nettle: 3.3 [pfSense]
        gmp: 5.1.3_3 [pfSense]
        libidn: 1.33_1 [pfSense]
        pftop: 0.7_7 [pfSense]
        strongswan: 5.5.1 [pfSense]
        vstr: 1.0.15_1 [pfSense]
        php56-sockets: 5.6.29 [pfSense]
        php56-filter: 5.6.29 [pfSense]
        voucher: 0.1_2 [pfSense]
        filterdns: 1.0_15 [pfSense]
        isc-dhcp43-client: 4.3.5 [pfSense]
        php56-pfSense-module: 0.32 [pfSense]
        links: 2.13,1 [pfSense]
        php56-sysvsem: 5.6.29 [pfSense]
        php56-readline: 5.6.29 [pfSense]
        filterlog: 0.1_5 [pfSense]
        scponly: 4.8.20110526_2 [pfSense]
        qstats: 0.2 [pfSense]
        php56-posix: 5.6.29 [pfSense]
        igmpproxy: 0.1_5,1 [pfSense]
        php56-openssl: 5.6.29 [pfSense]
        php56-gettext: 5.6.29 [pfSense]
        php-xdebug: 2.4.1_1 [pfSense]
        xinetd: 2.3.15_2 [pfSense]
        bsnmp-regex: 0.6_1 [pfSense]
        php56-ldap: 5.6.29 [pfSense]
        openldap-client: 2.4.44 [pfSense]
        uclcmd: 0.1_1 [pfSense]
        libucl: 0.8.0 [pfSense]
        wrapalixresetbutton: 0.0.7 [pfSense]
        php56-pcntl: 5.6.29 [pfSense]
        rate: 0.9_1 [pfSense]
        php56-session: 5.6.29 [pfSense]
        php56-sysvmsg: 5.6.29 [pfSense]
        php56-shmop: 5.6.29 [pfSense]
        php56-xmlreader: 5.6.29 [pfSense]
        bsnmp-ucd: 0.4.2 [pfSense]
        dhcpleases6: 0.1_2 [pfSense]
        pear-Crypt_CHAP: 1.5.0 [pfSense]
        dmidecode: 3.0 [pfSense]
        php56-sqlite3: 5.6.29 [pfSense]
        relayd: 5.5.20140810_2 [pfSense]
        cpustats: 0.1_1 [pfSense]
        php-suhosin: 0.9.38_3 [pfSense]
        php56-bcmath: 5.6.29 [pfSense]

Number of packages to be installed: 149

The process will require 449 MiB more space.
125 MiB to be downloaded.

Proceed with this action? [y/N]: y

No dice ?
Already more than 15min in this state. No I/O. CPU 25%, Load ~ 1.4, Mem. normal 14%. What's going on ?

ADD: I aborted after 30min. Ctrl-C =>  signal received, cleaning up. Back at prompt.

ADD:

  PID USERNAME    THR PRI NICE   SIZE    RES STATE   C   TIME    WCPU COMMAND
53727 root          1 103    0 47888K 14804K CPU1    1   2:39 100.00% pkg
27942 root          1  23    0   264M 29224K piperd  2   0:00   1.76% php-fpm
47711 root          1  52   20 13048K  2384K wait    2   0:42   0.20% sh
....

[PiBa]

Might be that some pkg file is partially corrupted? Can you try (im assuming the name of the pool is zroot):

zpool list
zpool scrub zroot
zpool status -v zroot

Keep running the last command until its done scanning the disk.

[hda]

[2.4.0-BETA][root@apu2b2.localdomain]/root: zpool list
NAME    SIZE  ALLOC   FREE  EXPANDSZ   FRAG    CAP  DEDUP  HEALTH  ALTROOT
zroot  12.9G   470M  12.4G         -     6%     3%  1.00x  ONLINE  -

[2.4.0-BETA][root@apu2b2.localdomain]/root: zpool scrub zroot
[2.4.0-BETA][root@apu2b2.localdomain]/root:

[2.4.0-BETA][root@apu2b2.localdomain]/root: zpool status -v zroot
  pool: zroot
 state: ONLINE
  scan: scrub repaired 0 in 0h0m with 0 errors on Tue Jan 17 20:55:02 2017
config:

        NAME        STATE     READ WRITE CKSUM
        zroot       ONLINE       0     0     0
          ada0p3    ONLINE       0     0     0

errors: No known data errors

[PiBa]

Try logging what its doing, might show that it fails to read (part of) some file? After a minute or two check the logfile possibly showing lots of commands repeating/hanging at the end of the log.. The try and find what if any file it was busy with at that time.?.

truss -o /root/truss_pkg_upgrade.log pkg upgrade

Not sure if this is the best way, but it did help me find some problem files once..

[hda]

[2.4.0-BETA][root@apu2b2.localdomain]/root: truss -o /root/truss_pkg_upgrade.log pkg upgrade
Updating pfSense-core repository catalogue...
Fetching meta.txz: 100%    940 B   0.9kB/s    00:01
Fetching packagesite.txz: 100%    2 KiB   1.8kB/s    00:01
Processing entries: 100%
pfSense-core repository update completed. 7 packages processed.
Updating pfSense repository catalogue...
Fetching meta.txz: 100%    940 B   0.9kB/s    00:01
Fetching packagesite.txz: 100%  120 KiB 122.6kB/s    00:01
Processing entries: 100%
pfSense repository update completed. 441 packages processed.
Checking for upgrades (0 candidates): 100%
Processing candidates (0 candidates): 100%
Checking integrity... done (0 conflicting)
Your packages are up to date.
[2.4.0-BETA][root@apu2b2.localdomain]/root:

A lot of "No such file or directory" in the log file i.e.

[2.4.0-BETA][root@apu2b2.localdomain]/root: tail -40 truss_pkg_upgrade.log
access("/var/db/pkg/local.sqlite-journal",F_OK)  ERR#2 'No such file or directory'
fstat(12,{ mode=-rw-r--r-- ,inode=20540,size=109568,blksize=109568 }) = 0 (0x0)
pread(0xc,0x7fffffffd900,0x10,0x18)              = 16 (0x10)
fstat(12,{ mode=-rw-r--r-- ,inode=20540,size=109568,blksize=109568 }) = 0 (0x0)
access("/var/db/pkg/local.sqlite-wal",F_OK)      ERR#2 'No such file or directory'
fstat(12,{ mode=-rw-r--r-- ,inode=20540,size=109568,blksize=109568 }) = 0 (0x0)
fcntl(12,F_SETLK,0x7fffffffd8d0)                 = 0 (0x0)
stat("/var/db/pkg/local.sqlite",{ mode=-rw-r--r-- ,inode=20540,size=109568,blksize=109568 }) = 0 (0x0)
getpid()                                         = 86979 (0x153c3)
stat("/var/db/pkg/local.sqlite",{ mode=-rw-r--r-- ,inode=20540,size=109568,blksize=109568 }) = 0 (0x0)
openat(AT_FDCWD,"/var/db/pkg/local.sqlite-journal",O_RDWR|O_CREAT|O_CLOEXEC,0644) = 17 (0x11)
fstat(17,{ mode=-rw-r--r-- ,inode=21580,size=0,blksize=131072 }) = 0 (0x0)
geteuid()                                        = 0 (0x0)
fchown(17,0,0)                                   = 0 (0x0)
fstat(17,{ mode=-rw-r--r-- ,inode=21580,size=0,blksize=131072 }) = 0 (0x0)
pwrite(0x11,0x8031d7908,0x200,0x0)               = 512 (0x200)
pwrite(0x11,0x7fffffffd914,0x4,0x200)            = 4 (0x4)
pwrite(0x11,0x803319b08,0x400,0x204)             = 1024 (0x400)
pwrite(0x11,0x7fffffffd914,0x4,0x604)            = 4 (0x4)
fcntl(12,F_SETLK,0x7fffffffd8c0)                 = 0 (0x0)
fcntl(12,F_SETLK,0x7fffffffd8c0)                 = 0 (0x0)
pwrite(0x11,0x7fffffffd8a4,0x4,0x608)            = 4 (0x4)
pwrite(0x11,0x803325d08,0x400,0x60c)             = 1024 (0x400)
pwrite(0x11,0x7fffffffd8a4,0x4,0xa0c)            = 4 (0x4)
pread(0x11,0x7fffffffd898,0x8,0xc00)             = 0 (0x0)
pwrite(0x11,0x7fffffffd888,0xc,0x0)              = 12 (0xc)
fsync(0x11)                                      = 0 (0x0)
openat(AT_FDCWD,"/var/db/pkg",O_CLOEXEC,00)      = 18 (0x12)
fsync(0x12)                                      = 0 (0x0)
close(18)                                        = 0 (0x0)
pwrite(0xc,0x803325d08,0x400,0x0)                = 1024 (0x400)
pwrite(0xc,0x803319b08,0x400,0x10400)            = 1024 (0x400)
fsync(0xc)                                       = 0 (0x0)
close(17)                                        = 0 (0x0)
unlink("/var/db/pkg/local.sqlite-journal")       = 0 (0x0)
fcntl(12,F_SETLK,0x7fffffffd840)                 = 0 (0x0)
fcntl(12,F_SETLK,0x7fffffffd840)                 = 0 (0x0)
fcntl(12,F_SETLK,0x7fffffffd860)                 = 0 (0x0)
exit(0x0)
process exit, rval = 0
[2.4.0-BETA][root@apu2b2.localdomain]/root:

Thanks again for pointing the methods. And I concluded that the database is missing.
So reinstall is mandatory I think.

[PiBa]

Hm but the command 'pkg upgrade' itself completed correctly right, what was the one that failed.? I dont have those -journal and -wal files myself either might be normal..

Was the failure with installing the pfsense package parts? Can you try?:

truss -o /root/truss_pkg_install.log pkg install pfSense pfSense-base pfSense-default-config pfSense-kernel-pfSense pfSense-rc pfSense-repo pfSense-upgrade

[hda]

After 2min, aborted. 16MB file.

[2.4.0-BETA][root@apu2b2.localdomain]/root: tail -40 truss_pkg_install.log
mkdir("/var/cache",0777)                         ERR#17 'File exists'
mkdir("/var/cache/pkg",0777)                     ERR#17 'File exists'
statfs("/var/cache/pkg",0x7fffffffd798)          ERR#2 'No such file or directory'
mkdir("/var",0777)                               ERR#17 'File exists'
mkdir("/var/cache",0777)                         ERR#17 'File exists'
mkdir("/var/cache/pkg",0777)                     ERR#17 'File exists'
statfs("/var/cache/pkg",0x7fffffffd798)          ERR#2 'No such file or directory'
mkdir("/var",0777)                               ERR#17 'File exists'
mkdir("/var/cache",0777)                         ERR#17 'File exists'
mkdir("/var/cache/pkg",0777)                     ERR#17 'File exists'
statfs("/var/cache/pkg",0x7fffffffd798)          ERR#2 'No such file or directory'
mkdir("/var",0777)                               ERR#17 'File exists'
mkdir("/var/cache",0777)                         ERR#17 'File exists'
mkdir("/var/cache/pkg",0777)                     ERR#17 'File exists'
statfs("/var/cache/pkg",0x7fffffffd798)          ERR#2 'No such file or directory'
mkdir("/var",0777)                               ERR#17 'File exists'
mkdir("/var/cache",0777)                         ERR#17 'File exists'
mkdir("/var/cache/pkg",0777)                     ERR#17 'File exists'
statfs("/var/cache/pkg",0x7fffffffd798)          ERR#2 'No such file or directory'
mkdir("/var",0777)                               ERR#17 'File exists'
mkdir("/var/cache",0777)                         ERR#17 'File exists'
SIGNAL 2 (SIGINT)
sigprocmask(SIG_SETMASK,{ SIGINT },0x0)          = 0 (0x0)
write(2,"pkg: ",5)                               = 5 (0x5)
write(2,"\nsignal received, cleaning up",29)     = 29 (0x1d)
write(2,"\n",1)                                  = 1 (0x1)
unlink("pÙÿÿ")                          ERR#2 'No such file or directory'
rename("pÙÿÿ-pkgtemp","pÙÿÿ")          ERR#2 'No such file or directory'
unlink("pÙÿÿ-journal")                  ERR#2 'No such file or directory'
unlink("pÙÿÿ")                          ERR#2 'No such file or directory'
rename("pÙÿÿ-pkgtemp","pÙÿÿ")          ERR#2 'No such file or directory'
unlink("pÙÿÿ-journal")                  ERR#2 'No such file or directory'
unlink("pÙÿÿ")                          ERR#2 'No such file or directory'
rename("pÙÿÿ-pkgtemp","pÙÿÿ")          ERR#2 'No such file or directory'
unlink("pÙÿÿ-journal")                  ERR#2 'No such file or directory'
unlink("pÙÿÿ")                          ERR#2 'No such file or directory'
rename("pÙÿÿ-pkgtemp","pÙÿÿ")          ERR#2 'No such file or directory'
unlink("pÙÿÿ-journal")                  ERR#2 'No such file or directory'
exit(0x1)
process exit, rval = 1
[2.4.0-BETA][root@apu2b2.localdomain]/root:

Circular ?

[2.4.0-BETA][root@apu2b2.localdomain]/var/cache: ls -l
total 1
lrwxr-xr-x  1 root  wheel  24 Jan 16 16:51 pkg -> ../../root/var/cache/pkg
[2.4.0-BETA][root@apu2b2.localdomain]/var/cache:

[PiBa]

So the "SIGNAL 2 (SIGINT)" is probably from you pressing Ctrl+C, and before that its looping over the same 4 commands..
What happens right before it enters that 'loop'?
Can you check if /var/cache/pkg/ exists, and all files seem 'valid' no 0 byte files or something? Or just throw the whole pkg folder in there away or rename it.?.

[PiBa]

Can you disable memory disks if you have those enabled? For me on a regular full install it isn't a 'linked' folder..

[2.4.0-BETA][root@pfSe.localdomain]/var/cache: ls -l
total 105
drwxr-xr-x  2 root  wheel   16 Jan 18 22:44 pkg

[hda]

I do not have RAM-disk enabled.

[2.4.0-BETA][root@apu2b2.localdomain]/: find / -name pkg
/var/cache/pkg
/var/db/pkg
/var/db/pkg/pkg
/etc/pkg
/usr/share/keys/pkg
/usr/local/pkg
/usr/local/sbin/pkg
/usr/local/etc/pkg
/usr/local/share/pfSense/pkg
/usr/local/share/pfSense/keys/pkg
/usr/sbin/pkg

And this is all that is there for "db pkg":

[2.4.0-BETA][root@apu2b2.localdomain]/: ls -l /var/db/pkg/pkg
lrwxr-xr-x  1 root  wheel  21 Jan 16 16:51 /var/db/pkg/pkg -> ../../root/var/db/pkg
[2.4.0-BETA][root@apu2b2.localdomain]/: ls -l /var/db/pkg/
total 483
-rw-r--r--  1 root  wheel  109568 Jan 18 22:25 local.sqlite
-rw-r--r--  1 root  wheel     246 Jan 18 21:59 pfSense-core.meta
-rw-r--r--  1 root  wheel     246 Jan 18 16:55 pfSense.meta
lrwxr-xr-x  1 root  wheel      21 Jan 16 16:51 pkg -> ../../root/var/db/pkg
-rw-r--r--  1 root  wheel   70656 Jan 18 22:26 repo-pfSense-core.sqlite
-rw-r--r--  1 root  wheel  832512 Jan 18 22:26 repo-pfSense.sqlite
[2.4.0-BETA][root@apu2b2.localdomain]/:

[PiBa]

My vote go's to getting rid of those linked pkg folders..
Mine:

[2.4.0-BETA][root@pfSe.localdomain]/var/cache: ls -l /var/db/pkg
total 3667
-rw-r--r--  1 root  wheel  6195200 Jan 18 22:44 local.sqlite
-rw-r--r--  1 root  wheel      246 Jan 18 21:59 pfSense-core.meta
-rw-r--r--  1 root  wheel      246 Jan 18 16:55 pfSense.meta
-rw-r--r--  1 root  wheel    70656 Jan 18 22:42 repo-pfSense-core.sqlite
-rw-r--r--  1 root  wheel   832512 Jan 18 22:42 repo-pfSense.sqlite

[2.4.0-BETA][root@pfSe.localdomain]/var/cache: ls -l
total 105
drwxr-xr-x  2 root  wheel   16 Jan 18 22:44 pkg
drwxr-xr-x  2 root  wheel  474 Jan 18 19:43 pkg X

[2.4.0-BETA][root@pfSe.localdomain]/var/cache:

The place that "pkg -> ../../root/var/db/pkg" points to doesnt seem to exist.. I would try and delete it. And also from /var/cache/
pkg should recreate the cache folder itself when it downloads new stuff..

[hda]

Beautyfull !
Yes, the removal of the link-files freed up the update & recreation processes.
Thanks PiBa.

...
pfSense 2.4.0-BETA amd64 Wed Jan 18 14:23:45 CST 2017
Bootup complete

FreeBSD/amd64 (apu2b2.localdomain) (ttyu0)

*** Welcome to pfSense 2.4.0-BETA (amd64) on apu2b2 ***
...

:) :) :)

[athurdent]

Just freshly installed pfSense-CE-2.4.0-BETA-amd64-20170119-1521.iso on a KVM.

Same error:

pkg: No package(s) matching pfSense-kernel-*

Issuing

pkg install pfSense pfSense-base pfSense-default-config pfSense-kernel-pfSense pfSense-rc pfSense-repo pfSense-upgrade

seems to have fixed it.

Maybe related to changes introduced in Bug #7086?

zfs list
NAME                 USED  AVAIL  REFER  MOUNTPOINT
zroot                592M  45.7G    96K  /zroot
zroot/ROOT           455M  45.7G    96K  none
zroot/ROOT/default   454M  45.7G   454M  /
zroot/tmp            336K  45.7G   336K  /tmp
zroot/var            137M  45.7G   137M  /var

[jimp]

Does this still happen on a current snapshot?

[athurdent]

Nope, Renato fixed it. I also reinstalled my primary system today, all fine.