RDP between VLAN takes a while to initialize
-
Hi all. I have a VLAN 160 and VLAN 1. I am RDP'ing from 192.168.160.28 -> 192.168.60.29 and it hangs for about….7 seconds to connect. Once connected it seems fine but it takes a while to initialize. I am allowing TCP/UDP 3389, ICMP, 53 TCP/UDP from VLAN160 to VLAN1, but I am not allowing VLAN1 to VLAN 160 in any way (which should be OK because the firewall is stateful). If I add an allow any any to the top of the rule for VLAN160 interface, RDP connects immediately.
I've done a packet capture and I don't see anything glaring. Grrr.
Any advice?
-
So I've done some more research after posting this by logging my rules. I will have some interesting results that I need to confirm, but I believe I may have fixed this issue. I will follow up for sure once I have been able to lab out this solution a little better.