Can't seem to get Squid Cache + ClamAV to work

[Chrismallia]

Are you manually pointing the devices to the proxy? If not you must tick transparent http

[Aiszaxs]

@doktornotor:

The pics don't work and the site has invalid cert. Use attachments.

Let me try again then:

[Aiszaxs]

@Chrismallia:

Are you manually pointing the devices to the proxy? If not you must tick transparent http

The device, is that the offense server or the individual client?
I tried enabling transparrent, without any luck.

I use this page to test it.
http://www.thinkbroadband.com/download.html

[doktornotor]

And the complaint is? The non-transparent proxy won't get used fox anything unless you point your clients to it.

[Aiszaxs]

@doktornotor:

And the complaint is? The non-transparent proxy won't get used fox anything unless you point your clients to it.

There's no complaint - I'm just trying to get this to work and learn a little on the way!

I'm no IT technician, I'm an Epidemiologist - so please use layman terms.

[Chrismallia]

The individual client.  Go to your browser setting and set it to use proxy, point it at the pfsense gateway and proxy port , EXAMPLE GATEWAY 192.168.0.1 port 3128

[doktornotor]

@Aiszaxs:

I'm no IT technician, I'm an Epidemiologist - so please use layman terms.

Here's some medical documentation on configuring proxies in a browser: http://library.medicine.yale.edu/services/computing/configure-browser

Or you might try some automated infection vectors :P

[Aiszaxs]

@doktornotor:

@Aiszaxs:

I'm no IT technician, I'm an Epidemiologist - so please use layman terms.

Here's some medical documentation on configuring proxies in a browser: http://library.medicine.yale.edu/services/computing/configure-browser

Or you might try some automated infection vectors :P

@Chrismallia:

The individual client.  Go to your browser setting and set it to use proxy, point it at the pfsense gateway and proxy port , EXAMPLE GATEWAY 192.168.0.1 port 3128

Alright guys - I've added the proxy manually.
I'm currently trying to download a 100mb test file:

http://ipv4.download.thinkbroadband.com/100MB.zip

I assume I would have to download it once, then should it be cached right ?
However once I try and re download it, I still don't exceed my 50Mbps connection.
I assume when I would download it from the RAM of the PFsense box on gigabit lan, I would get way higher speeds right?

[Aiszaxs]

Seems like it might be working now.
I have download bursts up to 165Mbps which is tripple the speed of my WAN connection.

[doktornotor]

Hint: There's the Real Time tab with logs, in case you need more info on what's going on.

[niebla]

Please try temporarily removing all other packages other than Squid, squidguard and lightsquid.

Are the  Squidm services started?

Does Lightsquid get reports?

Services are all running on my

2.4.2-RELEASE-p1 (amd64)
built on Tue Dec 12 13:45:26 CST 2017
FreeBSD 11.1-RELEASE-p6

Created the ClamAV log manually.

Have not tested ClamAV to confirm it is working but the services are running.

[Egrar]

:) enable transparent proxy settings, check if squid proxy works with this http://amibehindaproxy.com/, then check clamav services with the eicar.org virus test file - if you were able to download the file on your pc without being intercepted by squid+clamav services then clamav doesnt work (use http test file)

Take note I just noticed yesterday that clamav wasnt filtering the eicar virus test file, downloading it flags windows about the virus file.

[newUser2pfSense]

Have you looked at this post:
https://forum.pfsense.org/index.php?topic=117017.0