Unofficial E2guardian package for pfSense
-
Looks nice. I'll have to give it a try. A couple of questions:
1. Why a custom script and not get it officially into the Package Manager?
2. Is there documentation to get up and running? It looks like you create separate entries under the various ACLs and then create a Group and assign the ACLs to it. There's a lot of options on a lot of screens and they aren't all clear to me.
3. Aside from AD, how do we assign users to different groups? With squidGuard I needed to use the persons MAC to assign an IP through DHCP and then I could use that IP under a different ACL. I don't see a way to tie an IP or MAC into a group in here.Thanks for the work. This would be a big improvement over squidGuard if I can figure it out.
-
Looks nice. I'll have to give it a try. A couple of questions:
2. Is there documentation to get up and running? It looks like you create separate entries under the various ACLs and then create a Group and assign the ACLs to it. There's a lot of options on a lot of screens and they aren't all clear to me.
The e2guardian configuration is really complex but extremely powerfull. Some options you get on general configuration but most is applied per group.
A basic setup:
-
Apply the shalist under blacklist tab
-
Configure the default group under acl
-
save config
At this point, E2guardian users are required only when you have more then one group. All unauthenticated users or unlisted users will match first filter group.
So if you want to test a user based configuration, create a second group
-
Configure squid as your parent proxy under daemon tab
-
Select the Auth Plugin you want to interact with your squid configured user authentication
-
save and apply config
-
-
Is there any difference in the AV of E2guardian vs Squid? They both appear to be Clam but Squid seems to give more options for custom databases.
-
Is there any difference in the AV of E2guardian vs Squid? They both appear to be Clam but Squid seems to give more options for custom databases.
IIRC e2guardian has per group scan options but I agree clamd on squid has more options.
Maybe you need to test both bu for now, you can keep on squid.
we need a lot of tests to archive the best config for e2guardian on pfSense.
I'm planning an captive portal integration just the same way I did on squid.
-
I'm going to try to get some testing done tomorrow to see what I can come up with. Looking through the config options is a bit daunting, especially the Pics area since the value ranges keep changing. And where do I add in phrases to block? Can we create our own phrase lists?
-
Can we create our own phrase lists?
sure.
This is a wiki of Dansguardian. Most options works the same way on e2guardian.
http://contentfilter.futuragts.com/wiki/doku.php
https://github.com/e2guardian/e2guardian/wiki/Configuration
-
I've changed the submenu display style. I think it's better to see and undertand where you are.
What do you think?
images style1 are current pkg framework
images style2 has new style view.
What do you think?
-
To me, the original style is better. I can see that I'm in ACL's -> Phrase Lists by the underlining. It just sticks out better. In the second one I can see that I'm in ACLs but can't tell which sub-menu I'm in becasue it isn't showing any different. The bread-crumbs up top show it but it just isn't as easy to follow. I like your current style better.
-
I think style 2 is cleaner but would be even nicer if it did highlight the sub menu item too ;)
-
I think style 2 is cleaner but would be even nicer if it did highlight the sub menu item too ;)
I'll put the highlight as an option. For now I've changed de text on each xml to identify what tab you are.
-
I'm starting to test e2guardian but it won't start.
/root: /usr/local/etc/rc.d/e2guardian.sh start kern.ipc.somaxconn: 16384 -> 16384 kern.maxfiles: 131072 -> 131072 kern.maxfilesperproc: 104856 -> 104856 kern.threads.max_threads_per_proc: 4096 -> 4096 Starting e2guardian. In mapauthtoports mode you need to setup one port per auth plugin Error parsing the e2guardian.conf file or other e2guardian configuration files /usr/local/etc/rc.d/e2guardian.sh: WARNING: failed to start e2guardianCan those files be regenerated? I've pointed to shallalist but that's about it. The Default values in bold, those are the values used if the boxes are left blank? They don't need to be filled in do they?
EDIT:
I copied the e2guardian.conf.sample and overwrote /usr/local/etc/e2guardian/e2guardian.conf and I'm getting further. Now it tells me:/root: /usr/local/etc/rc.d/e2guardian.sh start kern.ipc.somaxconn: 16384 -> 16384 kern.maxfiles: 131072 -> 131072 kern.maxfilesperproc: 104856 -> 104856 kern.threads.max_threads_per_proc: 4096 -> 4096 Starting e2guardian. Error opening/creating log file. (check ownership and access rights). I am running as nobody and I am trying to open /var/log//access.log /usr/local/etc/rc.d/e2guardian.sh: WARNING: failed to start e2guardian -
What options did you selected to enable multiport?
-
What options did you selected to enable multiport?
What page has that option? I don't think I intentionally selected anything, just clicked through.
-
I have it working on my setup, including ssl interception. Try to selext just one interface. I'll try another clean setup and see how how to reproduce this.
-
I have LAN and loopback selected since the default is Lan/loopback. It's working with the sample config in place.
I ran a diff on the config file and the sample file and there is quite a bit of difference since the rows don't line up. I cleared up the commented lines and here is what the config options are in the broken file:
languagedir = '/usr/local/share/e2guardian/languages' language = 'ukenglish' loglevel = 3 logexceptionhits = 2 logfileformat = 1 anonymizelogs = off loglocation = '/var/log/e2guardian/access.log' dstatlocation = '/var/log/e2guardian/dstats.log' dstatinterval = 300 # = 5 minutes statlocation = '/var/log/e2guardian/stats' filterip = 192.168.1.1 filterip = 127.0.0.1 filterports = 8080 filterports = 8080 proxyip = 127.0.0.1 proxyport = 3128 proxytimeout = 30 proxyexchange = 20 pcontimeout = 55 usecustombannedimage = on custombannedimagefile = '/usr/local/share/e2guardian/transparent1x1.gif' usecustombannedflash = off custombannedflashfile = '/usr/local/share/e2guardian/blockedflash.swf' filtergroups = 1 filtergroupslist = '/usr/local/etc/e2guardian/lists/filtergroupslist' bannediplist = '/usr/local/etc/e2guardian/lists/bannediplist' exceptioniplist = '/usr/local/etc/e2guardian/lists/exceptioniplist' perroomblockingdirectory = '/usr/local/etc/e2guardian/lists/bannedrooms/' showweightedfound = on urlcachenumber = 1000 urlcacheage =900 scancleancache = on phrasefiltermode = 2 preservecase = 0 hexdecodecontent = off forcequicksearch = off reverseaddresslookups = off reverseclientiplookups = off logclienthostnames = off createlistcachefiles = on prefercachedlists = off maxcontentfiltersize = 256 maxcontentramcachescansize = 1000 maxcontentfilecachescansize = 2000 filecachedir = '/tmp' deletedownloadedtempfiles = on initialtrickledelay = 20 trickledelay = 20 downloadmanager = '/usr/local/etc/e2guardian/downloadmanagers/fancy.conf' downloadmanager = '/usr/local/etc/e2guardian/downloadmanagers/trickle.conf' downloadmanager = '/usr/local/etc/e2guardian/downloadmanagers/default.conf' contentscannertimeout = 60 contentscanexceptions = off recheckreplacedurls = off forwardedfor = off usexforwardedfor = off logconnectionhandlingerrors = on logsslerrors = off logchildprocesshandling = off maxchildren = 120 minchildren = 8 minsparechildren = 4 preforkchildren = 10 maxsparechildren = 32 maxagechildren = 500 maxips = 0 ipcfilename = '/tmp/.dguardianipc' urlipcfilename = '/tmp/.dguardianurlipc' ipipcfilename = '/tmp/.dguardianipipc' nodaemon = off nologger = off logadblocks = off loguseragent = daemonuser = 'clamav' daemongroup = 'nobody' softrestart = on cacertificatepath = '/etc/ssl/demoCA/cacert.pem' caprivatekeypath = '/etc/ssl/demoCA/private/cakey.pem' certprivatekeypath = '/etc/ssl/demoCA/private/serverkey.pem' generatedcertpath = '/usr/local/etc/e2guardian/ssl/generatedcerts' -
Looks like it was because I had both LAN and loopback selected. You may want to remove the verbage of "Default: LAN/loopback". For the other fields it states what is used when nothing is entered. In this field you still need to select the Interface.
-
Looks like it was because I had both LAN and loopback selected. You may want to remove the verbage of "Default: LAN/loopback". For the other fields it states what is used when nothing is entered. In this field you still need to select the Interface.
I concur. You have to select only one interface (LAN) to get it to work. When loopback is also selected, it wont start. I haven't had a chance to test the different options other then installing and enabling it using default options.
Need to figure out an easy/clean way to convert my old Dansguardian config to E2guardian (within the config.xml)
-
Need to figure out an easy/clean way to convert my old Dansguardian config to E2guardian (within the config.xml)
Easy as renaming it on xml(except for some config change from dansguardian to e2guardian) but I can help with a php script if you want.
-
FYI:
When I go to ACLs -> Antivirus, the lower menu bar disappears.
When I go to ACLs -> Search Engine, Both menu bars disappear. -
FYI:
When I go to ACLs -> Antivirus, the lower menu bar disappears.
When I go to ACLs -> Search Engine, Both menu bars disappear.It's a missing div on pkg_edit.php I've updated on install script.
EDIT
to apply the fix/update manually, under system_patches package, create a new patch with this info
--- pkg_edit.orig.php 2017-04-05 16:25:04.960401000 +0000 +++ pkg_edit.php 2017-04-03 22:56:33.184313000 +0000 @@ -651,6 +651,7 @@ if ($savehelp) { $savebutton->setHelp($savehelp); } +?> $form = new Form($savebutton); $form->addGlobal(new Form_Input(folder /usr/local/www/
