Hyper-V
-
@johnkeates:
Does anyone know what the status of freebsd 11 support on generation 2 hyper-v is?
I bet bsdic@microsoft.com knows.
Yes, they do know. I contacted them and heard back this morning. Generation 2 is in the development plan and is scheduled to be completed in the March 2017 time frame.
-
-
It's been a while since this topic had posts, but it seemed appropriate to follow-up here.
@johnkeates: Have you been in touch with your contacts since your reply back in November? Since we're now March, I'm curious how far out generation 2 VM support in Hyper-V might be for pfSense 2.4.
-
It's been a while since this topic had posts, but it seemed appropriate to follow-up here.
@johnkeates: Have you been in touch with your contacts since your reply back in November? Since we're now March, I'm curious how far out generation 2 VM support in Hyper-V might be for pfSense 2.4.
You'll have to ask bimmerdriver or bsdic@microsoft.com as I don't have anything new at the moment.
-
@johnkeates:
It's been a while since this topic had posts, but it seemed appropriate to follow-up here.
@johnkeates: Have you been in touch with your contacts since your reply back in November? Since we're now March, I'm curious how far out generation 2 VM support in Hyper-V might be for pfSense 2.4.
You'll have to ask bimmerdriver or bsdic@microsoft.com as I don't have anything new at the moment.
I haven't heard anything since my last post. If you contact bsdic@microsoft.com, please post an update here.
-
@bimmerdriver: I did reach out to bsdic@microsoft.com, and received a reply last night stating the following about FreeBSD generation 2 VM support:
1. The HEAD can boot on Hyper-V as Generation-2 VM now (patches for https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211746 will be pushed to stable/10 and stable/11 soon); however, Secure Boot must be disabled since it isn't supported yet.
2. The virtual DVD drive in the VM doesn't work yet. They are trying to fix it. In the meantime VM images can be created by following the "Bootable UEFI memory stick or Hard Disk" section of the UEFI doc on wiki.freebsd.org.
3. The keyboard of the VM doesn't work yet, but they are adding a driver for it so it should work soon.
Other than that they're running more tests to see if there are other issues. Sounds like it's pretty close though.
-
Hi all!
Dev team just added synthetic keyboard driver a few days ago :)
https://svnweb.freebsd.org/base/stable/11/sys/dev/hyperv/input/?view=log&sortby=file&pathrev=317189
Tested on fresh install of FreeBSD 11-STABLE within Hyper-V (MS 2016 Std as the host) and the keyboard works 8)
It seems the FreeBSD Gen 2 VMs is closing up to the final approach…
dmesg output:
Copyright
1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-STABLE #0 r317291: Sat Apr 22 22:51:09 CEST 2017
root@abc.def:/usr/obj/usr/src/sys/CUSTOM amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
SRAT: Ignoring memory at addr 0x808200000
SRAT: Ignoring memory at addr 0x1000000000
SRAT: Ignoring memory at addr 0x10000200000
SRAT: Ignoring memory at addr 0x20000200000
SRAT: Ignoring memory at addr 0x40000200000
SRAT: Ignoring memory at addr 0x80000200000
VT(efifb): resolution 1024x768
Hyper-V Version: 10.0.14393 [SP1]
Features=0x2e7f <vpruntime,tmrefcnt,synic,syntm,apic,hypercall,vpindex,reftsc,idle,tmfreq>PM Features=0x0 [C2]
Features3=0xed7b2 <debug,xmmhc,idle,numa,tmfreq,syncmc,crash,npiep>Timecounter "Hyper-V" frequency 10000000 Hz quality 2000
CPU: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz (3192.61-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
Features=0x1f83fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse,sse2,ss,htt>Features2=0xfed83203 <sse3,pclmulqdq,ssse3,fma,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c,rdrand,hv>AMD Features=0x2c100800 <syscall,nx,page1gb,rdtscp,lm>AMD Features2=0x121 <lahf,abm,prefetch>Structured Extended Features=0x1c2b38 <bmi1,hle,avx2,bmi2,erms,rtm,nfpusg,rdseed,adx,smap>XSAVE Features=0x1 <xsaveopt>Hypervisor: Origin = "Microsoft Hv"
real memory = 34359738368 (32768 MB)
avail memory = 33349726208 (31804 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <vrtual microsft="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <version 1.1="">irqs 0-23 on motherboard
Timecounter "Hyper-V-TSC" frequency 10000000 Hz quality 3000
random: entropy device external interface
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80765d10, 0) error 19
nexus0
cryptosoft0: <software crypto="">on motherboard
acpi0: <vrtual microsft="">on motherboard
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
cpu2: <acpi cpu="">on acpi0
cpu3: <acpi cpu="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
vmbus0: <hyper-v vmbus="">irq 5 on acpi0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, nat loadable, default to deny, logging disabled
usb_needs_explore_all: no devclass
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]…
mountroot: waiting for device /dev/gpt/rootfs...
vmbus0: version 3.0
hvet0: <hyper-v event="" timer="">on vmbus0
Event timer "Hyper-V" frequency 10000000 Hz quality 1000
hvkbd0: <hyper-v kbd="">on vmbus0</hyper-v>
hvheartbeat0: <hyper-v heartbeat="">on vmbus0
hvkvp0: <hyper-v kvp="">on vmbus0
hvshutdown0: <hyper-v shutdown="">on vmbus0
hvtimesync0: <hyper-v timesync="">on vmbus0
hvtimesync0: RTT
hvvss0: <hyper-v vss="">on vmbus0
storvsc0: <hyper-v scsi="">on vmbus0
(probe0:storvsc0:0:0:0): storvsc scsi_status = 2
hn0: <hyper-v network="" interface="">on vmbus0
da0 at storvsc0 bus 0 scbus0 target 0 lun 0
da0: <msft virtual="" disk="" 1.0="">Fixed Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 81920MB (167772160 512 byte sectors)
hn0: got notify, nvs type 128
hn0: Ethernet address: 00:15:5d:08:1e:00
hn0: link state changed to UP
hn1: <hyper-v network="" interface="">on vmbus0
hn1: got notify, nvs type 128
hn1: Ethernet address: 00:15:5d:08:1e:01
hn1: link state changed to UP
pcib0: <hyper-v pci="" express="" pass="" through="">on vmbus0
pcib0: vmbus_pcib failed to enable D0
device_attach: pcib0 attach returned 92
pcib0: <hyper-v pci="" express="" pass="" through="">on vmbus0
pcib0: vmbus_pcib failed to enable D0
device_attach: pcib0 attach returned 92</hyper-v></hyper-v></hyper-v></msft></hyper-v></hyper-v></hyper-v></hyper-v></hyper-v></hyper-v></hyper-v></hyper-v></hyper-v></at></acpi></acpi></acpi></acpi></vrtual></software></version></vrtual></xsaveopt></bmi1,hle,avx2,bmi2,erms,rtm,nfpusg,rdseed,adx,smap></lahf,abm,prefetch></syscall,nx,page1gb,rdtscp,lm></sse3,pclmulqdq,ssse3,fma,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c,rdrand,hv></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse,sse2,ss,htt></debug,xmmhc,idle,numa,tmfreq,syncmc,crash,npiep></vpruntime,tmrefcnt,synic,syntm,apic,hypercall,vpindex,reftsc,idle,tmfreq>
-
Yah, really good. Looks like support for gen 2 VM is getting close.
-
Here is an update from Microsoft:
FreeBSD VM (the CURRENT and the latest stable/11) can run as a Gen2 VM on Hyper-V now and basically it should work fine as Gen1 VM.
FreeBSD 11.1 will be released in 2 months or so and it will be the first official FreeBSD release that can run fine as Gen2 VM on Hyper-V.
So the question is when will pfsense move to FreeBSD 11.1.
-
Hope it's soon so I can ditch my old power hungry pc
-
Hope it's soon so I can ditch my old power hungry pc
Looks like the scheduled release date is July 26th (https://www.freebsd.org/releases/11.1R/schedule.html), so it's probably going to be a while before a release version of pfsense supports generation 2.