Unofficial E2guardian package for pfSense

pfsensation · Jun 10, 2017, 11:04 PM

Create a file on filesystem with the script and then call the file on cron.

Didn't work at first, but added "Done" at the end of the script. Now it seems to be working fine.

marcelloc · Jun 10, 2017, 11:28 PM

@marcelloc:

Create a file on filesystem with the script and then call the file on cron.

Didn't work at first, but added "Done" at the end of the script. Now it seems to be working fine.

Bad copy and paste. Sorry. I've fixed the post

marcelloc · Jun 11, 2017, 5:29 AM

Can you test if a full MITM e2guardian setup with no exceptions crashes? current binaries from package are not on the latest version but it's close to it. If you can confirm a crash, I'LL build with current latest code.

marcelloc · Jun 11, 2017, 5:29 AM

I found an workaround util 4.1.1 gets fixed 8)

Configure squid to intercept SSL connections with splice all mode (this checks only remote certificate)
Configure e2guardian Parent proxy Settings with your squid ssl interface configured.

Testing with steps I know that crashes the daemon but it's still alive with and without MITM.

pfsensation · Jun 11, 2017, 9:11 AM

@marcelloc:

I found an workaround util 4.1.1 gets fixed 8)

Configure squid to intercept SSL connections with splice all mode (this checks only remote certificate)

Configure e2guardian Parent proxy Settings with your squid ssl interface configured.

Testing with steps I know that crashes the daemon but it's still alive with and without MITM.

Won't squid and E2Guardian conflict with each other if I configure squid to intercept traffic? Since it creates a NAT rule and I already have a NAT rule for port 80 > 8080 for E2guardian.
Remember squid is completely unrestricted in terms of allowing Web access without E2 Guardian. I also realised you updated the package, what's new in the newer version?

Got the error below on the latest version available in the repo.

PHP ERROR: Type: 1, File: /etc/inc/util.inc, Line: 1731, Message: Allowed memory size of 262144000 bytes exhausted (tried to allocate 47625514 bytes)	@ 2017-06-11 11:16:25

Then got this crash report…

					Crash report begins.  Anonymous machine information:

amd64
10.3-RELEASE-p19
FreeBSD 10.3-RELEASE-p19 #0 bbfdb9a1d(RELENG_2_3_4): Wed May  3 16:09:14 CDT 2017     root@ce23-amd64-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
[11-Jun-2017 11:16:25 Europe/London] PHP Fatal error:  Allowed memory size of 262144000 bytes exhausted (tried to allocate 47625514 bytes) in /etc/inc/util.inc on line 1731
[11-Jun-2017 11:16:25 Europe/London] PHP Stack trace:
[11-Jun-2017 11:16:25 Europe/London] PHP   1\. {main}() /usr/local/www/pkg_edit.php:0
[11-Jun-2017 11:16:25 Europe/London] PHP   2\. eval() /usr/local/www/pkg_edit.php:141
[11-Jun-2017 11:16:25 Europe/London] PHP   3\. e2guardian_check_config() /usr/local/www/pkg_edit.php(141) : eval()'d code:1
[11-Jun-2017 11:16:25 Europe/London] PHP   4\. e2guardian_start() /usr/local/pkg/e2guardian.inc:1309
[11-Jun-2017 11:16:25 Europe/London] PHP   5\. mwexec() /usr/local/pkg/e2guardian.inc:1357
[11-Jun-2017 11:16:25 Europe/London] PHP   6\. sprintf() /etc/inc/util.inc:1731

No FreeBSD crash data found.

marcelloc · Jun 11, 2017, 10:54 AM

Did you tried the debug version package I've posted before?

There is a new config option (banner site with bypass key) on new binaries, you need to save config and apply in order to get correct config files.

pfsensation · Jun 11, 2017, 10:58 AM

@marcelloc:

Did you tried the debug version package I've posted before?

There is a new config option (banner site with bypass key) on new binaries, you need to save config and apply in order to get correct config files.

I updated via the console, and it might have automatically gone to the debug version. Where is that option? :o

marcelloc · Jun 11, 2017, 11:13 AM

No, debug version needs a manual intervention.
To be sure you're not on a debug version, just try to run run /usr/local/sbin/e2guardian on console

pfsensation · Jun 11, 2017, 11:24 AM

@marcelloc:

No, debug version needs a manual intervention.
To be sure you're not on a debug version, just try to run run /usr/local/sbin/e2guardian on console

When I run the command I am getting an output. Does that mean I'm on the debug version? I'm confused.

marcelloc · Jun 11, 2017, 11:49 AM

@pfsensation:

When I run the command I am getting an output. Does that mean I'm on the debug version? I'm confused.

big output with a lot of information means debug mode, if it backs to console then you're on normal version.

marcelloc · Jun 11, 2017, 11:52 AM

Try to delete the crash alert and see if it happens again. I have no alerts or crashes on gui here.

pfsensation · Jun 11, 2017, 12:10 PM

@marcelloc:

@pfsensation:

When I run the command I am getting an output. Does that mean I'm on the debug version? I'm confused.

big output with a lot of information means debug mode, if it backs to console then you're on normal version.

Yep I am getting a lot of information. I ended up on the debug version just by updating through the console, how do I return back to normal version? Or do you recommend I stay on the debug version for now.

marcelloc · Jun 11, 2017, 12:34 PM

Uninstall then Install the package using the gui. And see if it will install the debug version.

pfsensation · Jun 11, 2017, 2:58 PM

@marcelloc:

Uninstall then Install the package using the gui. And see if it will install the debug version.

Yep, after re-installation running "/usr/local/sbin/e2guardian" again I'm still getting back a lot of information.

EDIT: got the error again

PHP ERROR: Type: 1, File: /etc/inc/util.inc, Line: 1729, Message: Allowed memory size of 262144000 bytes exhausted (tried to allocate 72 bytes)	@ 2017-06-11 14:33:38

					Crash report begins.  Anonymous machine information:

amd64
10.3-RELEASE-p19
FreeBSD 10.3-RELEASE-p19 #0 bbfdb9a1d(RELENG_2_3_4): Wed May  3 16:09:14 CDT 2017     root@ce23-amd64-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
[11-Jun-2017 14:33:38 Europe/London] PHP Fatal error:  Allowed memory size of 262144000 bytes exhausted (tried to allocate 72 bytes) in /etc/inc/util.inc on line 1729
[11-Jun-2017 14:33:38 Europe/London] PHP Stack trace:
[11-Jun-2017 14:33:38 Europe/London] PHP   1\. {main}() /usr/local/www/pkg_edit.php:0
[11-Jun-2017 14:33:38 Europe/London] PHP   2\. eval() /usr/local/www/pkg_edit.php:141
[11-Jun-2017 14:33:38 Europe/London] PHP   3\. e2guardian_check_config() /usr/local/www/pkg_edit.php(141) : eval()'d code:1
[11-Jun-2017 14:33:38 Europe/London] PHP   4\. e2guardian_start() /usr/local/pkg/e2guardian.inc:1309
[11-Jun-2017 14:33:38 Europe/London] PHP   5\. mwexec() /usr/local/pkg/e2guardian.inc:1357
[11-Jun-2017 14:33:38 Europe/London] PHP   6\. exec() /etc/inc/util.inc:1729

marcelloc · Jun 11, 2017, 6:06 PM

I'll remove the debug version from repo. Are you on 2.3 amd64?

EDIT

done. No debug version on repo. An uninstall and reinstall should fix.

marcelloc · Jun 11, 2017, 9:09 PM

After 12hs, still no crashes. This week I'll push more clients to e2g and see how it goes.

good memory usage and performance. results from top -n -o res

Mr. Jingles · Jun 11, 2017, 6:39 PM

@Mr.:

@marcelloc:

To remove tinyproxy, install it from Unofficial repo and then uninstall. The same with e2guardian.

The c-icap is a package from squid

Sorry to ask, Marcello, but how do install from unofficial repo? pkg install and then…?

Pfsensation above this reply says uninstalling isn't going to work(?)

marcelloc · Jun 11, 2017, 9:10 PM

@Mr.:

Sorry to ask, Marcello, but how do install from unofficial repo? pkg install and then…?

Just enabled the Unofficial repo following instructions from the first post and then go to GUI under system -> package manager

pfsensation · Jun 11, 2017, 9:43 PM

@marcelloc:

I'll remove the debug version from repo. Are you on 2.3 amd64?

EDIT

done. No debug version on repo. An uninstall and reinstall should fix.

Yes I am on 2.3 amd64. Reinstalled again, this time I got a new option in the GUI.

However when I type "/usr/local/sbin/e2guardian" I still get the output below.

EDIT: Ran update via console, and got a new E2Guardian update. I guess this is it?

EDIT2:
Updated from the console, now it's not giving me a tonne of information. Why the inconsistency when updating from the webgui or the console?? The annoying thing is, when updating from the console, usually it forces a reboot. You may not want your internet at your work, or whatever organisation you deployed it to go down for a minute or two.

marcelloc · Jun 11, 2017, 9:51 PM

There is no binary update on upgrade. You need to uninstall it to remove e2guardian bsd package.

And after installing, you need to save config and apply to be sure you are not using default bsd package conf files.

The menu on console is for a system upgrade, to update packages on console, use pkg update, pkg install, etc…