Ausfall Pfsense
-
Hallo, seit heute morgen ist meine Pfsense nicht mehr erreichbar. Auf keiner IP kann ich die Pfsense errreichen. auch nicht über SSH. Ich poste jetzt auf meinem Kabel BW modem direkt.
Ein/ausschalten hat auch nicht geholfen.
Wie kann ich ein scope7 7568 noch erreichen? -
die 7568 hat doch eine konsole! schließ doch mal deinen Rechner daran an und schau nach was das Gerät ausgibt :)
-
Kennst Du die belegung von dem Kabel, habe kein Kabel mitgeliefert bekommen , habe aber eine Rechner mit SUB 9 und eine Adapter von SUB9 auf RJ45
-
Über Konsole ist kein Draufkommen. habe mir jetzt eine Hintertür über einen anderen Router gebaut. was habe ich für Möglichkeiten?
-
Moin,
es sollte sich um die Cisco "Standard Consolen Kabel Blau-Türkise" handeln.
Das Pinout findest Du bei Google.HornetX11
-
Hallo,
habe ein Kabel gebaut. Ich vermute das Filesystem ist zerschossen. Wie spiele ich an dem Teil ein neues Filesystem auf, habe keine Anleitung gefunden.
Das System bleibt immer an der selben Stelle hängen. Brauche ich die 32bit version oder die 64bit Version?=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.07.30 18:44:30 =~=~=~=~=~=~=~=~=~=~=~= [05;00HBoot: F1 [06;00H/ /boot/config: -S115200 -D /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Consoles: internal video/keyboard serial port BIOS drive C: is disk0 BIOS 622kB/3134016kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (root@ce23-amd64-builder, Wed May 3 15:55:45 CDT 2017) |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|Loading /boot/defaults/loader.conf /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-[H[J\|/- [7;46H [8;46H [9;46H [10;46H ______ [11;46H / \ [12;46H _____/ f \ [13;46H / \ / [14;46H / p \______/ Sense[15;46H \ / \ [16;46H \_____/ \ [17;46H \ / [18;46H \______/ [19;46H [20;46H [21;46H \|/-\ [1;2H __ ____ [2;2H _ __ / _/ ___| ___ _ __ ___ ___ [3;2H | '_ \| |_\___ \ / _ \ '_ \/ __|/ _ \ [4;2H | |_) | _|___) | __/ | | \__ \ __/ [5;2H | .__/|_| |____/ \___|_| |_|___/\___| [6;2H |_| [7;2H [10;2H|[11;2H|[12;2H|[13;2H|[14;2H|[15;2H|[16;2H|[17;2H|[18;2H|[19;2H|[20;2H|[21;2H|[10;44H|[11;44H|[12;44H|[13;44H|[14;44H|[15;44H|[16;44H|[17;44H|[18;44H|[19;44H|[20;44H|[21;44H|[9;3H=========================================[22;3H=========================================[9;2H+[22;2H+[9;44H+[22;44H+[25;0H|/-\|/-\|/-\[9;15HWelcome to pfSense[11;5H1 [11;6H.[11;8HBoot Multi User [Enter][12;5H2 [12;6H.[12;8HBoot [S]ingle User[13;5H3 [13;6H.[13;8H[Esc]ape to loader prompt[14;5H4 [14;6H.[14;8HReboot[16;5HOptions:[17;5H5 [17;6H.[17;8H[K]ernel: kernel (1 of 2)[18;5H6 [18;6H.[18;8HConfigure Boot [O]ptions...[25;0H[23;4HAutoboot in 2 seconds. [Space] to pause[25;0H[23;4HAutoboot in 1 seconds. [Space] to pause[25;0H[23;4H [25;0H|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/kernel text=0x12933f8 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/data=0x8a1bb8+0x23ec20 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\syms=[0x8+0x177768|/-+0x8+0x173f12\|/] Booting... -\|/-\KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p19 #0 bbfdb9a1d(RELENG_2_3_4): Wed May 3 16:09:14 CDT 2017 root@ce23-amd64-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.04-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x40e31d <sse3,dtes64,mon,ds_cpl,tm2,ssse3,cx16,xtpr,pdcm,movbe>AMD Features=0x20100800 <syscall,nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4087791616 (3898 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <011613 APIC1021> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP/HT): APIC ID: 3 random: <software, yarrow="">initialized ioapic0: Changing APIC ID to 4 ioapic0 <version 2.0="">irqs 0-23 on motherboard wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806209b0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80620a60, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80620b10, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80647cb0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80647d60, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80647e10, 0) error 1 netmap: loaded module kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <011613 RSDT1021> on motherboard acpi0: Power Button (fixed) cpu0: <acpi cpu="">on acpi0 cpu1: <acpi cpu="">on acpi0 cpu2: <acpi cpu="">on acpi0 cpu3: <acpi cpu="">on acpi0 attimer0: <at timer="">port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 vgapci0: <vga-compatible display="">port 0x8c00-0x8c07 mem 0xfe480000-0xfe4fffff,0xd0000000-0xdfffffff,0xfe500000-0xfe5fffff irq 16 at device 2.0 on pci0 agp0: <intel pineview="" svga="" controller="">on vgapci0 agp0: aperture size is 256M, detected 8188k stolen memory vgapci0: Boot video device vgapci1: <vga-compatible display="">mem 0xfe380000-0xfe3fffff at device 2.1 on pci0 pcib1: <acpi pci-pci="" bridge="">irq 22 at device 28.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 em0: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x9c00-0x9c1f mem 0xfe6e0000-0xfe6fffff,0xfe6dc000-0xfe6dffff irq 16 at device 0.0 on pci1 em0: Using MSIX interrupts with 3 vectors em0: Ethernet address: 00:90:0b:43:35:64 em0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib2: <acpi pci-pci="" bridge="">irq 23 at device 28.1 on pci0 pci2: <acpi pci="" bus="">on pcib2 em1: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xac00-0xac1f mem 0xfe7e0000-0xfe7fffff,0xfe7dc000-0xfe7dffff irq 17 at device 0.0 on pci2 em1: Using MSIX interrupts with 3 vectors em1: Ethernet address: 00:90:0b:43:35:65 em1: netmap queues/slots: TX 1/1024, RX 1/1024 pcib3: <acpi pci-pci="" bridge="">irq 20 at device 28.2 on pci0 pci3: <acpi pci="" bus="">on pcib3 em2: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 18 at device 0.0 on pci3 em2: Using MSIX interrupts with 3 vectors em2: Ethernet address: 00:90:0b:43:35:66 em2: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: <acpi pci-pci="" bridge="">irq 21 at device 28.3 on pci0 pci4: <acpi pci="" bus="">on pcib4 em3: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 19 at device 0.0 on pci4 em3: Using MSIX interrupts with 3 vectors em3: Ethernet address: 00:90:0b:43:35:67 em3: netmap queues/slots: TX 1/1024, RX 1/1024 pcib5: <acpi pci-pci="" bridge="">irq 22 at device 28.4 on pci0 pci5: <acpi pci="" bus="">on pcib5 em4: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 16 at device 0.0 on pci5 em4: Using MSIX interrupts with 3 vectors em4: Ethernet address: 00:90:0b:43:35:68 em4: netmap queues/slots: TX 1/1024, RX 1/1024 pcib6: <acpi pci-pci="" bridge="">irq 23 at device 28.5 on pci0 pci6: <acpi pci="" bus="">on pcib6 em5: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci6 em5: Using MSIX interrupts with 3 vectors em5: Ethernet address: 00:90:0b:43:35:69 em5: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: <intel 82801h="" (ich8)="" usb="" controller="" usb-a="">port 0x8880-0x889f irq 23 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <intel 82801h="" (ich8)="" usb="" controller="" usb-b="">port 0x8800-0x881f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <intel 82801h="" (ich8)="" usb="" controller="" usb-c="">port 0x8480-0x849f irq 18 at device 29.2 on pci0 usbus2 on uhci2 ehci0: <intel 82801h="" (ich8)="" usb="" 2.0="" controller="" usb2-a="">mem 0xfe47bc00-0xfe47bfff irq 23 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib7: <acpi pci-pci="" bridge="">at device 30.0 on pci0 pci7: <acpi pci="" bus="">on pcib7 isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <intel ich8m="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ata channel="">at channel 0 on atapci0 atapci1: <intel ich8m="" sata300="" controller="">port 0x8400-0x8407,0x8080-0x8083,0x8000-0x8007,0x7c00-0x7c03,0x7880-0x788f,0x7800-0x780f irq 18 at device 31.2 on pci0 ata2: <ata channel="">at channel 0 on atapci1 ata3: <ata channel="">at channel 1 on atapci1 acpi_button0: <power button="">on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <parallel port="" bus="">on ppc0 lpt0: <printer>on ppbus0 lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] Timecounters tick every 1.000 msec random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: <intel>at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1 ugen2.1: <intel>at usbus2 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen3.1: <intel>at usbus3 uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered ada0 at ata2 bus 0 scbus1 target 0 lun 0 ada0: <wdc wd5000luct-63c26y0="" 01.01a01="">ACS-2 ATA SATA 2.x device ada0: Serial Number WD-WX21A957S1YN ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC" frequency 1800040140 Hz quality 1000 Trying to mount root from ufs:/dev/ufsid/562935b4784d7fe8 [rw]... Configuring crash dumps... Using /dev/label/swap0 for dump device. /dev/ufsid/562935b4784d7fe8: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/562935b4784d7fe8: clean, 115351600 free (6416 frags, 14418148 blocks, 0.0% fragmentation) Filesystems are clean, continuing... Mounting filesystems...</wdc></intel></intel></intel></intel></intel></intel></intel></intel></at></keyboard></generic></system></parallel></printer></parallel></parallel></power></ata></ata></intel></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></vga-compatible></intel></vga-compatible></acpi></acpi></high></at></at></acpi></acpi></acpi></acpi></software></version></software,></lahf></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,tm2,ssse3,cx16,xtpr,pdcm,movbe></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>
-
Kommt jetzt die Werbepause? ;D
Ernsthaft: Du hast abgebrochen wo es interessant wurde, wie bootet die Kiste weiter?-teddy
-
sie bootet nicht weiter.
-
OK, das ist doof. Hast Du eine komplexe Konfiguration? Backup vorhanden? Selber installiert?
Kiste mit einem USB Stick booten und die Smart Werte der HD auslesen. lt. Statusabfrage hast Du noch über 1 Jahr Garantie auf die HD
Ich würde überlegen die HD gegen eine SSD auszutauschen, Neuinstallation vornehmen, Trim aktivieren. bei vorhandenem Backups ist das schnell erledigt.Wenn Du die Kiste komplett so gekauft hast Händler mal um Unterstützung bitten? Gewährleistung?
Alternativ auf der vorhandenen HD neu installieren und beobachten?
-teddy
-
Hallo,
habe die pfsense neu von USB aufgespielt und Backup eingespielt. Sie läuft wieder. Werde mich mit den Herrsteller wegen der Frwstplatte kurzschliesen.