Unbound ipv6 problems anyone?
-
I've issued a PR for this.
-
I installed the PR and I'm happy to confirm that it works perfectly.
So you can see it in action, here are some log messages:
Aug 11 10:23:32 php-cgi rc.bootup: sync unbound done. Aug 11 10:23:31 php-cgi rc.bootup: dhcp6 init complete. Continuing Aug 11 10:23:30 php-fpm 291 /rc.newwanipv6: Removing static route for monitor fe80::ea4:2ff:fe29:5001 and adding a new route through fe80::ea4:2ff:fe29:5001%hn1 Aug 11 10:23:30 php-fpm 291 /rc.newwanipv6: ROUTING: setting IPv6 default route to fe80::ea4:2ff:fe29:5001%hn1 Aug 11 10:23:30 php-fpm 291 /rc.newwanipv6: ROUTING: setting default route to *.*.116.1 Aug 11 10:23:30 php-fpm 291 /rc.newwanipv6: rc.newwanipv6: on (IP address: fe80::215:5dff:fe5c:e21d%hn1) (interface: wan) (real interface: hn1). Aug 11 10:23:30 php-fpm 291 /rc.newwanipv6: rc.newwanipv6: Info: starting on hn1. Aug 11 10:23:30 php-cgi rc.bootup: Unbound start waiting on dhcp6c. Aug 11 10:23:29 rtsold Received RA specifying route fe80::ea4:2ff:fe29:5001 for interface wan(hn1) Aug 11 10:23:29 php-cgi rc.bootup: Unbound start waiting on dhcp6c. Aug 11 10:23:28 php-cgi rc.bootup: Unbound start waiting on dhcp6c. Aug 11 10:23:27 php-cgi rc.bootup: Unbound start waiting on dhcp6c. Aug 11 10:23:33 php-cgi rc.bootup: Unbound start waiting on dhcp6c. Aug 11 10:23:32 php-cgi rc.bootup: Unbound start waiting on dhcp6c. Aug 11 10:23:31 php-cgi rc.bootup: Unbound start waiting on dhcp6c. Aug 11 10:23:31 php-cgi rc.bootup: ROUTING: setting default route to 154.20.116.1 Aug 11 10:23:30 php-cgi rc.bootup: Resyncing OpenVPN instances. Aug 11 10:23:30 kernel hn0: link state changed to UP Aug 11 10:23:30 check_reload_status Linkup starting hn0 Aug 11 10:23:30 php-cgi rc.bootup: Starting dhcp6 client for interface wan hn1 in DHCP6 without RA mode Aug 11 10:23:28 php-fpm 291 /rc.newwanip: rc.newwanip: on (IP address: *.*.118.8) (interface: WAN[wan]) (real interface: hn1). Aug 11 10:23:28 php-fpm 291 /rc.newwanip: rc.newwanip: Info: starting on hn1. Aug 11 10:23:27 php-cgi rc.bootup: Accept router advertisements on interface hn1 Aug 11 10:23:27 php-cgi rc.bootup: calling interface_dhcpv6_configure. Aug 11 10:23:27 check_reload_status rc.newwanip starting hn1Thank you very much for fixing this problem.
-
Apart from the weird time stamps. 8)
-
@marjohn56:
Apart from the weird time stamps. 8)
I never noticed that. I guess that's a bug in the log.
-
@marjohn56:
Apart from the weird time stamps. 8)
You've cracked time travel as well :-)
-
Just to be sure I did test this and seems to not break anything on uk sky connections. So good from my end.
-
bimmerdriver, is it possible that you have trouble with hardware clock? ???
-
@nivek1612:
@marjohn56:
Apart from the weird time stamps. 8)
You've cracked time travel as well :-)
I rebooted and took another look at the logs. I guess the time travel was a once-only event. Strange.
-
Maybe NTP daemon syncs sometimes in the same time unbound starts?
-
I think the time traveller idea is more fun. 8)
