Pfsense Openvpn server and client connected but not working
-
No. The real, inside IP addresses of the hosts you are pinging from and to. Not the WAN addresses. Once the tunnel is up those don't matter any more.
-
Dear,
Server A side
Lan interface not configured:
Only WAN Address: 192.168.2.250
Static IP Address : 82.236.52.82
Vpn tunnel: 10.18.18.0 /24
Clint B side:PFsene or LAN Interface IP: 192.168.9.254
WAN Address: 82.233.50.200
Static IP Address: 82.533.50.200.i am ping from 192.168.2.*** to 192.168.9.** not able to do
-
I am asking for a specific IP address on each side and you still give ***.
What is the default gateway set on host 192.168.2.*** ???
-
Default gateway on 192.168.2.250 is 192.168.1.10
Deafult gateway set on 192.168.9. 254 is 87.**.2*.201. -
No. The default gateways set on the two end hosts that are trying to communicate over the VPN.
Please provide their exact IP addresses and their set default gateways.
-
Dear Derelict,
i am not understand can you explain me deeply. please help me
Regards
kiruba
-
viragomann and Derelict any suggestion please
-
i am ping from 192.168.2.*** to 192.168.9.** not able to do
What, exact host is 192.168.2.***?
What, exactly, is the default gateway configured on that host?
What, exact host is 192.168.9.**?
What, exactly, is the default gateway configured on that host?
-
i am ping from 192.168.2.*** to 192.168.9.** not able to do
What, exact host is 192.168.2.***?
What, exactly, is the default gateway configured on that host?
What, exact host is 192.168.9.**?
What, exactly, is the default gateway configured on that host?
Screen shot was attached…
 -
No. The hosts you are pinging to/from on those networks.
-
No. The hosts you are pinging to/from on those networks.
No i am not able to ping… only status showing connected...
But in the Diagonists states it was showing multiple:mulitple.
Regards
kiruba
-
I'm sorry. You probably need to ask your question in the forum for your native language in your native language.
