Quick Snort Setup Instructions for New Users

MikeV7896

Hey. Thanks for this useful post.
Btw this list is 3 years old. Is it still (mostly) up to date ?

Also I have a few repeating alerts I can't figure out. Can you help ?

1:2018959. ET POLICY PE EXE or DLL Windows file download HTTP
1:28039. INDICATOR-COMPROMISE Suspicious .pw dns query
119:33. (http_inspect) UNESCAPED SPACE IN HTTP URI

Thanks !

A few options may have had slight name changes, and I think one has been removed since it was written, but for the most part it's still good.

On your repeating alerts…

The first one looks like an alert that a .exe or .dll file is being downloaded from the internet. I can see why that would be a common one. Probably safe to suppress or disable this rule, depending on your preference, unless your users shouldn't be downloading executable binary files to their computers.

The second one looks like an alert that a potentially suspicious .pw domain is being looked up using DNS. You might want to check the host(s) that the alert is showing up for to make sure there isn't any malicious software on it/them. Of course, if your hosts regularly access systems that are legitimate in the .pw TLD, then you might want to suppress or disable this one.

The third is a rather common one regarding a space character in an HTTP URL that isn't being formatted with an escape sequence (i.e. %20), which should be done to adhere to proper specs, but sometimes isn't. This one should be safe to suppress or disable.

Edit to add: Your second alert could also be caused by a torrent client, connecting to a user in the country that uses the .pw TLD for data.

THS

Hey you were right. It was because of bittorrent. It was blocking all traffic to .PW

I turned that rule off.

hamed_forum

the google block in snort beacuse (portscan) TCP Portscan
i must whats do?
Portscan Detection
protocol tcp
scan type all
Sensitivity low

Fobio

I have setup snort and it's been running well. Thank you for those here with the setup tips.

Today I tried to download FireFox and it all timed out to address: download-installer.cdn.mozilla.net

I've followed the setup and disabled the ET-Policy-Mozilla rule. What else could be affecting this? I've done a few searches and haven't found anything here or elsewhere.

Mr. Jingles

@Fobio:

I have setup snort and it's been running well. Thank you for those here with the setup tips.

Today I tried to download FireFox and it all timed out to address: download-installer.cdn.mozilla.net

I've followed the setup and disabled the ET-Policy-Mozilla rule. What else could be affecting this? I've done a few searches and haven't found anything here or elsewhere.

Normally the alerts tab for the interface should give a clue, does it say anything?

Fobio

@Mr.:

@Fobio:

I have setup snort and it's been running well. Thank you for those here with the setup tips.

Today I tried to download FireFox and it all timed out to address: download-installer.cdn.mozilla.net

I've followed the setup and disabled the ET-Policy-Mozilla rule. What else could be affecting this? I've done a few searches and haven't found anything here or elsewhere.

Normally the alerts tab for the interface should give a clue, does it say anything?

Likely this:

1:2003492 ET MALWARE Suspicious Mozilla User-Agent - Likely Fake (Mozilla/4.0)

Veldkornet

Hey guys,

I keep getting the following alert "2000419 ET POLICY PE EXE or DLL Windows file download" but I dot even have emerging-policy.rules enabled (I never have)….. I only have
emerging-botcc.rules
emerging-compromised.rules
emerging-dshield.rules
emerging-exploit.rules
emerging-malware.rules
emerging-trojan.rules
emerging-worm.rules

Is it possible that it's coming from one of these other categories?

I've force disabled it for now, but I have no idea why it's showing up...

djseto

@jflsakfja:

The Missing Part to Quick Snort Setup Instructions for New Users

Instructions on making the most of your shiny new IDS
Snort is designed to block pretty much anything you can think of. That's why there are many false positives. When I first started using snort, I was constantly banging my head on my desk because most sites would be blocked for (seemingly) no reason.
The CORRECT way to stop false positives is to disable the rules causing them, NOT using suppression lists. I may hear you ask "but all other places on the internet say use suppression lists, why shouldn't I?".
A little (simplified) info on how snort works will help you understand why.
Snort takes the packets and analyses them. Matches to the rules will be forwarded to alerts, then pfsense's plugin takes over and bans them. Suppression lists work just before the last step. They stop alerts from being produced. Disabling rules stops the "process" at the very beginning. Why analyze a packet if you are going to ignore it? This saves CPU processing which could be used for other purposes (eg enable more rules).
There are times when this will not work. Rules deep deep inside snort (preprocessor rules) have no way of being disabled (if I'm wrong about this, please correct me). That's where suppression lists become useful.

With that out of the way, this is the process to stop false positives.

Identify the rule causing them. On the alerts tab you will find all alerts (no kidding). The last columns should show a number in the format x:YYYY:x and an explanation for the rule.
I'll use this for this example:
x:2000419:x ET POLICY PE EXE or DLL Windows file download

copy the YYYY part (2000419). Take a look at the explanation. ET (emerging threats) POLICY. This means you'll find this rule in emerging-policy list.

go to the snort home page (services> snort). Click the e to edit interface settings, then go to rules. In the drop down select emerging-policy. Assuming you use firefox, CTRL+F and paste the rule number (called sig_id, signature ID) and click next. For other browsers, find a way to search the page for a term and enter the number there.

click the red or yellow (depending if you previously enabled the rule) to turn it into a lighter shade of yellow (see bottom of page).

top of page, click apply changes and wait for the page to reload.

go back to the snort home page and restart the interface (click the red x until it becomes green, wait a couple of seconds and click it again to turn it back to red) <<< DO NOT FORGET THIS STEP
–----warning!!!-------
as of version 2.5.8 the icons are now swapped. Green is running, red is not running. So invert the colors above

relax, the rule is now disabled and will stop generating alerts. Go to blocked tab, and find the ip that it previously banned and unban it (click the button to the right of the explanation).

In that rare case you cannot find the rule causing the alert (eg explanation does not offer information about the list), first check GPLv2 list, then IPS policy list. If you still cannot find it, a suppression entry is needed. Simply click the add to suppression list (little +) next to the rule on the alerts tab. Assuming you have set up your suppression list correctly, it will be added to it. Restart the interface (step 6 above), unban the ip, and you are done!

And now for my contribution to the community. The default enabled rules are too relaxed. We need to enable more rules, but a word of caution. ONLY USE THIS LIST IF YOU HAVE ENOUGH MEMORY.
I'm currently using it on redundant CARP firewalls, with a crappy p4 cpu and 2GB of ram each. The systems average about 25-30% RAM usage.The list below shows how snort is configured on a production environment and works perfectly (for me) but it is not complete. Entries that do not have a DONE > in front of them are NOT COMPLETED. Please review and make changes depending on your environment.

In tab "Rules", under "Category" select:
(--- means blank table at time of writing)

DONE > emerging-activex > all

DONE > emerging-attack_responses > all

DONE > emerging-botcc > all

DONE > emerging-chat > all except:
2010784 ET CHAT Facebook Chat (send message)
2010785 ET CHAT Facebook Chat (buddy list)
2010786 ET CHAT Facebook Chat (settings)
2010819 ET CHAT Facebook Chat using XMPP
2002327 ET CHAT Google Talk (Jabber) Client Login
2002334 ET CHAT Google IM traffic Jabber client sign-on
2001241 ET CHAT MSN file transfer request
2001242 ET CHAT MSN file transfer accept
2001243 ET CHAT MSN file transfer reject
2001682 ET CHAT MSN IM Poll via HTTP
2002192 ET CHAT MSN status change
2008289 ET CHAT Possible MSN Messenger File Transfer
2009375 ET CHAT General MSN Chat Activity
2009376 ET CHAT MSN User-Agent Activity

DONE > emerging-ciarmy > all

DONE > emerging-compromised > all

DONE > emerging-current_events > all

DONE > emerging-deleted > ---

DONE > emerging-dns > all except:
2008446 ET DNS Excessive DNS Responses with 1 or more RR's (100+ in 10
seconds) - possible Cache Poisoning Attempt
2008470 ET DNS Excessive NXDOMAIN responses - Possible DNS Backscatter or Domain Generation Algorithm Lookups
2001117 ET DNS Standard query response, Name Error

DONE > emerging-dos > all

DONE > emerging-drop > all

DONE > emerging-dshield > all

DONE > emerging-exploit > all except:
2001058 ET EXPLOIT libpng tRNS overflow attempt
2002913 ET EXPLOIT VNC Client response
2002914 ET EXPLOIT VNC Server VNC Auth Offer
2002919 ET EXPLOIT VNC Good Authentication Reply
2002915 ET EXPLOIT VNC Authentication Reply
2002758 ET EXPLOIT WMF Escape Record Exploit - Version 1
2002742 ET EXPLOIT WMF Escape Record Exploit - Version 3

DONE > emerging-ftp > all

DONE > emerging-games > all

DONE > emerging-icmp > ---

DONE > emerging-icmp_info > ---

DONE > emerging-imap > ---

DONE > emerging-inappropriate > all except:
2002925 ET INAPPROPRIATE Google Image Search, Safe Mode Off
2001608 ET INAPPROPRIATE Likely Porn

DONE > emerging-info > all except:
2014472 ET INFO JAVA - Java Archive Download
2014473 ET INFO JAVA - Java Archive Download By Vulnerable Client
2014819 ET INFO Packed Executable Download
2015016 ET INFO FTP STOR to External Network
2015561 ET INFO PDF Using CCITTFax Filter
2015744 ET INFO EXE IsDebuggerPresent (Used in Malware Anti-Debugging)
2016360 ET INFO JAVA - ClassID
2016361 ET INFO JAVA - ClassID
2016404 ET INFO MPEG Download Over HTTP (1)

DONE > emerging-malware > all except:
2008438 ET MALWARE Possible Windows executable sent when remote host claims to send a Text File

DONE > emerging-misc > all

DONE > emerging-mobile_malware > all except:
2012251 ET MOBILE_MALWARE Google Android Device HTTP Request
2012848 ET MOBILE_MALWARE Possible Mobile Malware POST of IMEI International Mobile Equipment Identity in URI

DONE > emerging-netbios > all

DONE > emerging-p2p > all except:
2000369 ET P2P BitTorrent Announce
2007727 ET P2P possible torrent download
2008581 ET P2P BitTorrent DHT ping request
2008583 ET P2P BitTorrent DHT nodes reply
2008585 ET P2P BitTorrent DHT announce_peers request
2010144 ET P2P Vuze BT UDP Connection (5)
2011699 ET P2P Bittorrent P2P Client User-Agent (Transmission/1.x)

*emerging-policy > all except:
2000419 ET POLICY PE EXE or DLL Windows file download
2000428 ET POLICY ZIP file download
2001115 ET POLICY MSI (microsoft installer file) download
2003595 ET POLICY exe download via HTTP - Informational
2001898 ET POLICY eBay Bid Placed
2001907 ET POLICY eBay Placing Item for sale
2001908 ET POLICY eBay View Item
2001909 ET POLICY eBay Watch This Item
2003303 ET POLICY FTP Login Attempt (non-anonymous)
2003410 ET POLICY FTP Login Successful
2003121 ET POLICY docs.google.com Activity
2003597 ET POLICY Google Calendar in Use
2002801 ET POLICY Google Desktop User-Agent Detected
2002838 ET POLICY Google Search Appliance browsing the Internet
2000035 ET POLICY Hotmail Inbox Access
2000036 ET POLICY Hotmail Message Access
2000037 ET POLICY Hotmail Compose Message Access
2000038 ET POLICY Hotmail Compose Message Submit
2000039 ET POLICY Hotmail Compose Message Submit Data
2008238 ET POLICY Hotmail Inbox Access
2008239 ET POLICY Hotmail Message Access
2008240 ET POLICY Hotmail Compose Message Access
2008242 ET POLICY Hotmail Access Full Mode
2006408 ET POLICY HTTP Request on Unusual Port Possibly Hostile
2006409 ET POLICY HTTP POST on unusual Port Possibly Hostile
2002330 ET POLICY Google Talk TLS Client Traffic
2002332 ET POLICY Google IM traffic Windows client user sign-on
2002333 ET POLICY Google IM traffic friend invited
2002878 ET POLICY iTunes User Agent
2002722 ET POLICY MP3 File Transfer Outbound
2002723 ET POLICY MP3 File Transfer Inbound
2001114 ET POLICY Mozilla XPI install files download
2001973 ET POLICY SSH Server Banner Detected on Expected Port
2001974 ET POLICY SSH Client Banner Detected on Expected Port
2001975 ET POLICY SSHv2 Server KEX Detected on Expected Port
2001976 ET POLICY SSHv2 Client KEX Detected on Expected Port
2001977 ET POLICY SSHv2 Client New Keys detected on Expected Port
2001978 ET POLICY SSH session in progress on Expected Port
2001979 ET POLICY SSH Server Banner Detected on Unusual Port
2001980 ET POLICY SSH Client Banner Detected on Unusual Port
2001981 ET POLICY SSHv2 Server KEX Detected on Unusual Port
2001982 ET POLICY SSHv2 Client KEX Detected on Unusual Port
2001983 ET POLICY SSHv2 Client New Keys Detected on Unusual Port
2001984 ET POLICY SSH session in progress on Unusual Port
2013031 ET POLICY Python-urllib/ Suspicious User Agent
2013414 ET POLICY Executable served from Amazon S3
2014297 ET POLICY Vulnerable Java Version 1.7.x Detected
2012647 ET POLICY Dropbox.com Offsite File Backup in Use
2012648 ET POLICY Dropbox Client Broadcasting
2014313 ET POLICY Executable Download From DropBox

DONE > emerging-pop3 > ---

DONE > emerging-rbn-malvertisers > all

DONE > emerging-rbn > all

DONE > emerging-rpc > ---

DONE > emerging-scada > all

DONE > emerging-scan > all except
2002992 ET SCAN Rapid POP3 Connections - Possible Brute Force Attack
2002993 ET SCAN Rapid POP3S Connections - Possible Brute Force Attack
2002994 ET SCAN Rapid IMAP Connections - Possible Brute Force Attack
2002995 ET SCAN Rapid IMAPS Connections - Possible Brute Force Attack

DONE > emerging-shellcode > all except
2011803 ET SHELLCODE Possible TCP x86 JMP to CALL Shellcode Detected
2012252 ET SHELLCODE Common 0a0a0a0a Heap Spray String
2012257 ET SHELLCODE Common %0c%0c%0c%0c Heap Spray String
2012510 ET SHELLCODE UTF-8/16 Encoded Shellcode
2013222 ET SHELLCODE Excessive Use of HeapLib Objects Likely Malicious Heap Spray Attempt
2013267 ET SHELLCODE Hex Obfuscated JavaScript Heap Spray 0a0a0a0a

DONE > emerging-smtp > all

DONE > emerging-snmp > all

DONE > emerging-sql > all

DONE > emerging-telnet > all

DONE > emerging-tftp > all

DONE > emerging-tor > all

emerging-trojan > all except

DONE > emerging-user_agents > all except:
2010697 ET USER_AGENTS Suspicious User-Agent Beginning with digits - Likely spyware/trojan

DONE > emerging-voip > all

DONE > emerging-web_client > all except
2011347 ET WEB_CLIENT Possible String.FromCharCode Javascript Obfuscation Attempt
2011507 ET WEB_CLIENT PDF With Embedded File
2010518 ET WEB_CLIENT Possible HTTP 404 XSS Attempt (External Source)
2012119 ET WEB_CLIENT Possible Hex Obfuscation Usage On Webpage
2012205 ET WEB_CLIENT Possible Malicious String.fromCharCode with charCodeAt String
2012266 ET WEB_CLIENT Hex Obfuscation of unescape % Encoding
2012272 ET WEB_CLIENT Hex Obfuscation of eval % Encoding
2012398 ET WEB_CLIENT Hex Obfuscation of replace Javascript Function % Encoding

DONE > emerging-web_server > all except
2003099 ET WEB_SERVER Poison Null Byte

emerging-web_specific_apps > all except:
2010890 ET WEB_SPECIFIC_APPS phpBB3 registration (Step1 GET)
2010891 ET WEB_SPECIFIC_APPS phpBB3 registration (Step2 POST)
2010892 ET WEB_SPECIFIC_APPS phpBB3 registration (Step3 GET)
2010893 ET WEB_SPECIFIC_APPS phpBB3 registration (Step4 POST)

DONE > emerging-worm > all

DONE > GPLv2 community rules > all except
254 DNS SPOOF query response with TTL of 1 min. and no authority
384 PROTOCOL-ICMP PING
385 PROTOCOL-ICMP traceroute
399 PROTOCOL-ICMP Destination Unreachable Host Unreachable
402 PROTOCOL-ICMP Destination Unreachable Port Unreachable
408 PROTOCOL-ICMP Echo Reply
540 POLICY-SOCIAL Microsoft MSN message
648 INDICATOR-SHELLCODE x86 NOOP
649 INDICATOR-SHELLCODE x86 setgid 0
1200 INDICATOR-COMPROMISE Invalid URL
1201 INDICATOR-COMPROMISE 403 Forbidden
1292 INDICATOR-COMPROMISE directory listing
1390 INDICATOR-SHELLCODE x86 inc ebx NOOP
1394 INDICATOR-SHELLCODE x86 inc ecx NOOP
1437 FILE-IDENTIFY Microsoft Windows Media download detected
1841 FILE-OTHER Oracle Javascript URL host spoofing attempt
1846 POLICY-MULTIMEDIA vncviewer Java applet download attempt
1852 SERVER-WEBAPP robots.txt access
1986 POLICY-SOCIAL Microsoft MSN outbound file transfer request
1988 POLICY-SOCIAL Microsoft MSN outbound file transfer accept
1989 POLICY-SOCIAL Microsoft MSN outbound file transfer rejected
1990 POLICY-SOCIAL Microsoft MSN user search
1991 POLICY-SOCIAL Microsoft MSN login attempt
2180 PUA-P2P BitTorrent announce request
2181 PUA-P2P BitTorrent transfer
2707 FILE-IMAGE JPEG parser multipacket heap overflow
3463 SERVER-WEBAPP awstats access
25518 OS-OTHER Apple iPod User-Agent detected
25519 OS-OTHER Apple iPad User-Agent detected
25520 OS-OTHER Apple iPhone User-Agent detected
25521 OS-OTHER Android User-Agent detected
25522 OS-OTHER Nokia User-Agent detected
25523 OS-OTHER Samsung User-Agent detected
25524 OS-OTHER Kindle User-Agent detected
25525 OS-OTHER Nintendo User-Agent detected

*IPS Policy - Security > all except
4152 BROWSER-PLUGINS Microsoft Windows Media Player 6.4 ActiveX object access
19436 BROWSER-IE Microsoft Internet Explorer CStyleSheetRule array memory corruption attempt

Suppression List:
#GLOBAL

gen_id 1

suppress gen_id 1, sig_id 536
suppress gen_id 1, sig_id 648
suppress gen_id 1, sig_id 653
suppress gen_id 1, sig_id 1390
suppress gen_id 1, sig_id 2452
suppress gen_id 1, sig_id 11192
suppress gen_id 1, sig_id 15306
suppress gen_id 1, sig_id 16313
suppress gen_id 1, sig_id 17458
suppress gen_id 1, sig_id 20583
suppress gen_id 1, sig_id 23098
suppress gen_id 1, sig_id 2000334
suppress gen_id 1, sig_id 2008120
suppress gen_id 1, sig_id 2010516
suppress gen_id 1, sig_id 20122758
suppress gen_id 1, sig_id 2014518
suppress gen_id 1, sig_id 2014520
suppress gen_id 1, sig_id 2100366
suppress gen_id 1, sig_id 2100368
suppress gen_id 1, sig_id 2100651
suppress gen_id 1, sig_id 2101390
suppress gen_id 1, sig_id 2101424
suppress gen_id 1, sig_id 2102314
suppress gen_id 1, sig_id 2103134
suppress gen_id 1, sig_id 2500056
suppress gen_id 1, sig_id 100000230
suppress gen_id 3, sig_id 14772
#(http_inspect) DOUBLE DECODING ATTACK
suppress gen_id 119, sig_id 2
#(http_inspect) BARE BYTE UNICODE ENCODING
suppress gen_id 119, sig_id 4
#(http_inspect) IIS UNICODE CODEPOINT ENCODING
suppress gen_id 119, sig_id 7
#(http_inspect) NON-RFC DEFINED CHAR [**]
suppress gen_id 119, sig_id 14
#(http_inspect) UNKNOWN METHOD
suppress gen_id 119, sig_id 31
#(http_inspect) SIMPLE REQUEST
suppress gen_id 119, sig_id 32
#(http_inspect) NO CONTENT-LENGTH OR TRANSFER-ENCODING IN HTTP RESPONSE
suppress gen_id 120, sig_id 2
#(http_inspect) NO CONTENT-LENGTH OR TRANSFER-ENCODING IN HTTP RESPONSE
suppress gen_id 120, sig_id 3
#(http_inspect) HTTP RESPONSE HAS UTF CHARSET WHICH FAILED TO NORMALIZE
suppress gen_id 120, sig_id 4
#(http_inspect) HTTP RESPONSE GZIP DECOMPRESSION FAILED
suppress gen_id 120, sig_id 6
#(http_inspect) INVALID CONTENT-LENGTH OR CHUNK SIZE
suppress gen_id 120, sig_id 8
#(http_inspect) JAVASCRIPT OBFUSCATION LEVELS EXCEEDS 1
suppress gen_id 120, sig_id 9

Unknown

suppress gen_id 120, sig_id 10
#(smtp) Attempted response buffer overflow: 1448 chars
suppress gen_id 124, sig_id 3
#(ftp_telnet) Invalid FTP Command
suppress gen_id 125, sig_id 2
#(ssp_ssl) Invalid Client HELLO after Server HELLO Detected
suppress gen_id 137, sig_id 1
#(IMAP) Unknown IMAP4 command
suppress gen_id 141, sig_id 1

I did the above and I'm getting this error in my System Logs and Snort isn't starting:

FATAL ERROR: /usr/local/etc/snort/snort_63694_igb0/rules/snort.rules(5021) byte_test rule option cannot extract more than 4 bytes without valid string prefix.

bmeeks

@djseto:

I did the above and I'm getting this error in my System Logs and Snort isn't starting:

FATAL ERROR: /usr/local/etc/snort/snort_63694_igb0/rules/snort.rules(5021) byte_test rule option cannot extract more than 4 bytes without valid string prefix.

Have you searched this sub-forum using the error message text? If you do, you should encounter this recent thread with your answer:
https://forum.pfsense.org/index.php?topic=130993.msg722272#msg722272.

Bill

bimmerdriver

OP, thank you for providing this guide.

I have some questions.

@bmeeks:

16. Click the Preprocessors tab.

17. Scroll down into the General Preprocessor Settings area and then check (or enable) all of the preprocessors listed in that section EXCEPT the Sensitive Data preprocessor. It can cause a lot of alerts and is best used after you gain some experience with Snort.

It's not clear which section of preprocessors you are talking about. There is no General Preprocessor Settings area.

@bmeeks:

19. Now click on the Categories tab. This is where we will choose a threat detection policy and associated rules.

20. If you followed my advice for Snort VRT rules, this page is easy. Just click the check box for "Use IPS Policy" and then select "Connectivity" in the drop-down. Click Save and you're done! Once you gain some experience with Snort, you can come back and choose one of the other two more restrictive policies. I personally run "Balanced", but it will require some tuning if run in blocking mode.

What is the difference between Connectivity and Balanced. The description does not explain the difference.

Connectivity blocks most major threats with few or no false positives. Balanced is a good starter policy.
It is speedy, has good base coverage level, and covers most threats of the day. It includes all rules in Connectivity.

Mr. Jingles

@bimmerdriver:

OP, thank you for providing this guide.

I have some questions.

@bmeeks:

16. Click the Preprocessors tab.

17. Scroll down into the General Preprocessor Settings area and then check (or enable) all of the preprocessors listed in that section EXCEPT the Sensitive Data preprocessor. It can cause a lot of alerts and is best used after you gain some experience with Snort.

It's not clear which section of preprocessors you are talking about. There is no General Preprocessor Settings area.

@bmeeks:

19. Now click on the Categories tab. This is where we will choose a threat detection policy and associated rules.

20. If you followed my advice for Snort VRT rules, this page is easy. Just click the check box for "Use IPS Policy" and then select "Connectivity" in the drop-down. Click Save and you're done! Once you gain some experience with Snort, you can come back and choose one of the other two more restrictive policies. I personally run "Balanced", but it will require some tuning if run in blocking mode.

What is the difference between Connectivity and Balanced. The description does not explain the difference.

Connectivity blocks most major threats with few or no false positives. Balanced is a good starter policy.
It is speedy, has good base coverage level, and covers most threats of the day. It includes all rules in Connectivity.

First: what bimmer do you drive? I have an E39, and a F01 :) Which one do you have? Engine? Automatic gear or manual? Color? Most important Options? In Bimmer world, we are One Big Family :-*

1. The General Preprocessor Settings indeed is gone. My guess is it is now 'Basic configuration settings', and a lot of other settings that used to be in 'General settings'. I think you could accept the defaults. 'Sensititive data' is now a separate setting all together: unflag it.
2. "Connectivity" versus "balanced" is described: one is more restrictive than the other. It is really nothing more than this: in one setting more categories and rules are enabled than in the other, by default. If you wish to know which ones, enable one settings, and then inspect the rules-tab to find out. It is just a helpful default suggestion from Bill, nothing more. He didn't write a tutorial for stuff you can easily see yourself by simply enabling the setting ;)

bimmerdriver

@Mr.:

First: what bimmer do you drive? I have an E39, and a F01 :) Which one do you have? Engine? Automatic gear or manual? Color? Most important Options? In Bimmer world, we are One Big Family :-*

I drive an E46, specifically 2002 M3 MT coupe with a lot of mods. Using your family analogy, your F01 is the stately father and my E46 is the kid that gets into a lot of trouble. E39 and F01 is an interesting combo. What are their year / model? An E39 M5 would be a nice alternate to an F01.

@Mr.:

1. The General Preprocessor Settings indeed is gone. My guess is it is now 'Basic configuration settings', and a lot of other settings that used to be in 'General settings'. I think you could accept the defaults. 'Sensititive data' is now a separate setting all together: unflag it.
2. "Connectivity" versus "balanced" is described: one is more restrictive than the other. It is really nothing more than this: in one setting more categories and rules are enabled than in the other, by default. If you wish to know which ones, enable one settings, and then inspect the rules-tab to find out. It is just a helpful default suggestion from Bill, nothing more. He didn't write a tutorial for stuff you can easily see yourself by simply enabling the setting ;)

Okay, that's what I thought.

maniak

@bmeeks:

8. Click the Snort Interfaces tab and then click the plus "+" icon to add a Snort interface.

9. On the If Settings tab, click the Enable checkbox.

10. In the drop-down, choose the interface. The WAN interface is the default and is a good first choice.

11. In the Description textbox, enter a name (WAN again, is fine here).

I have several OpenVPN clients that run as interfaces. Should I add them also in Snort interfaces or is it enough with just WAN?

Thanks for this great post. I followed your post and also watched this tutorial https://youtu.be/-GgqYq5-EBg

Thanks again!

Qinn

New to Snort I follow this one https://www.youtube.com/watch?v=-GgqYq5-EBg&feature=youtu.be and setup accordingly only one interface eg the WAN.
Strange enough I only see one source ip address (LAN) in the Alerts tab. I have 10 subnets, with many users using the internet, what am I overlooking?

For instance in PFBlockerNG-develop I am see enough of the IP's of the subnets.

Cheers Qinn

bmeeks

@qinn said in Quick Snort Setup Instructions for New Users:

New to Snort I follow this one https://www.youtube.com/watch?v=-GgqYq5-EBg&feature=youtu.be and setup accordingly only one interface eg the WAN.
Strange enough I only see one source ip address (LAN) in the Alerts tab. I have 10 subnets, with many users using the internet, what am I overlooking?

For instance in PFBlockerNG-develop I am see enough of the IP's of the subnets.

Cheers Qinn

When you run Snort on the WAN, it sees inbound traffic from the Internet before the NAT rules are unwound. So every packet has the public WAN IP address of your firewall as the destination. Only after NAT is unwound will the actual LAN IP address be present.

For this reason I recommend users run Snort on the LAN and not the WAN. When you run it on the LAN, it sees packets after NAT has been unwound so the IP addresses map directly to your LAN hosts.

Qinn

@bmeeks first thank you for the advice. I have changed it from WAN to WLAN (a private VLAN subnet for an AP) which has internet access and roughly 20 nodes, smartphones, desktops, Sonos etc.
In 2 hours time there were 10 alerts => (http_inspect) NO CONTENT-LENGTH OR TRANSFER-ENCODING IN HTTP RESPONSE

I have only enabled "Snort will use rules from one of three pre-defined IPS policies in the Snort Subscriber rules" and IPS Policy Selection checked.

bmeeks

@qinn said in Quick Snort Setup Instructions for New Users:

@bmeeks first thank you for the advice. I have changed it from WAN to WLAN (a private VLAN subnet for an AP) which has internet access and roughly 20 nodes, smartphones, desktops, Sonos etc.
In 2 hours time there were 10 alerts => (http_inspect) NO CONTENT-LENGTH OR TRANSFER-ENCODING IN HTTP RESPONSE

I have only enabled "Snort will use rules from one of three pre-defined IPS policies in the Snort Subscriber rules" and IPS Policy Selection checked.

The HTTP_INSPECT preprocessor rules will fire frequently and these days are mostly false positives. Most admins disable several of the HTTP_INSPECT rules. Search the IDS/IPS sub-forum here for suggestions on Snort Suppression Lists to find rules that most users suggest either suppressing or disabling.

Qinn

@bmeeks now I reread my reply, I realize I wasn't clear, I should have emphasized that I only had these ten alerts in 2 hours and that seems rather meager. I would have expected to see loads of alerts, as approximately 20 users (smartphones, desktops, Sonos etc.) are on this subnet.

bmeeks

@qinn, it depends totally on which precise rules are enabled and what the traffic on your network actually consists of. The goal in IDS/IPS is to get no or very few alerts and blocks. That means your network is relatively secure and clients are following the rules ... .

I don't mean that to say you should never get alerts, though. Just that you don't want to be receiving hundreds per hour. Once blocking is enabled that might drive you crazy as an admin. Within the IPS Polices, the Snort team has selected rules that provide security without a ton of false positive alerts.