-
You hit issue to get the key you need to put in the entry. If you hit issue again you get another key.
Hit issue, add the required TXT record to the zone, then hit renew.
The whole scheme is really designed to use an automatic DNS TXT record update method. You will have to go through the manual process again before the certificate expires, since the key you place in the TXT record is not held long-term at let's encrypt.
-
your try update to new version acme.sh-2.7.4. pfsense using old version. ;)
-
I have encountered the same problem
-
Derelict - Any place to find info on the DNS auto-update process? That makes sense and if I have to renew these certs every 3 months, I prefer to automate. Thanks for the additional explanation.
yon - thanks!
-
Derelict - Any place to find info on the DNS auto-update process? ….
You mean the "DNS-NSupdate" method ?
-
There are a number of dynamic DNS providers in the Acme package.
I had other reasons to run a local BIND server so I did this:
https://doc.pfsense.org/index.php/RFC2136_Dynamic_DNS
-
I had other reasons to run a local BIND server so I did this:
https://doc.pfsense.org/index.php/RFC2136_Dynamic_DNSThat was my starting point to.
Already had a bind9 server running some where on the net that knows about the domain name I'm using locally.
Used the same bind9 + RFC2136 so a host.domaine points already to the always changing IPv4.
Now it also works with the acme package using the "DNS-NSupdate" method.
Pure magic. -
just update from https://github.com/Neilpang/acme.sh/releases
pfsense use old VER=2.6.7 version now
-
@yon:
just update from https://github.com/Neilpang/acme.sh/releases
pfsense use old VER=2.6.7 version now
DO NOT update ACME files manually from github. That is a terrible suggestion. If you manually copy over something from there, you will clobber local changes and you'll definitely break at least the nsupdate method, if not others. There is a PR we're looking at to update ACME but we're focused on 2.4-RELEASE at the moment.
-
@yon:
just update from https://github.com/Neilpang/acme.sh/releases
pfsense use old VER=2.6.7 version now
DO NOT update ACME files manually from github. That is a terrible suggestion. If you manually copy over something from there, you will clobber local changes and you'll definitely break at least the nsupdate method, if not others. There is a PR we're looking at to update ACME but we're focused on 2.4-RELEASE at the moment.
I have no other better way, so I am looking for a temporary solution.After the update, it looks like it works right now.
-
Your probably is highly unlikely to be related to this subject, and your suggestion is also not relevant. If you want to hack up your own firewall, feel free, but do not suggest others repeat your mistakes.
Locking this thread since it has been solved and is deviating from the original topic.
