ESXi 6.5.0 Guest OS errors…
-
i just updated my lab box to 6.5.0 Update 1 (Build 6765664) and all of my 2.4/2.4.1 VMs powered up fine. No errors.
-
Any other log, pic, or info I can provide to help?
-
Was this a new 2.4.0 install or an upgrade? If it was a new install, what filesystem and partition options were used?
-
I installed 2.4 RC new when it was first released and then restored a config in order to take advantage of ZFS. It’s ZFS on Bios. I have updated each successive snapshot since the initial RC release.
-
I have a mix here, some upgrades, some new installs, most on UFS, one or two on ZFS, I think they're all on GPT/BIOS though. None have issues.
Any special hardware involved in the hypervisor? Passing anything through? Any special options enabled?
-
Nothing special. It’s a Lenovo Thinkstation C20. Dual Xeon Quad Core with 48GB ECC DDR3. No pci passthrough although VT-d is fully enabled for other guest VM’s. No tweaks or special options in the guest or host.
-
Looks like it could be a FreeBSD issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=220923 and/or https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=217282
Seems intermittent and doesn't appear to happen to everyone, not many hits out there for it.
Maybe something in the video/console settings of the virtual hardware itself.
-
So you stated "I'm on 6.5.0 (Build 5310538) and though I do see that guest OS difference message"
Then you updated to "6.5.0 Update 1 (Build 6765664)" Did this make the OS message go away?
-
So you stated "I'm on 6.5.0 (Build 5310538) and though I do see that guest OS difference message"
Then you updated to "6.5.0 Update 1 (Build 6765664)" Did this make the OS message go away?
No, that message is still there, and there is no OS option in the ESX settings for the VM to make it match. Not sure if that's something that FreeBSD or VMware is going to have to fix.
I should also add that the exact same message shows up on a FreeBSD 11.1 VM, so it isn't specific to pfSense. It does go away if you stop the tools guestd daemon, so maybe an update to the open-vm-tools package will eventually fix it.
-
I don't think that warning really matters. VMWare is simply not properly identifying the Guest OS but you already manually selected FreeBSD, so the drivers and hardware emulation is accurate. The same occurs when I update to brand new releases of macOS or Ubuntu builds.
-
I have not seen this OS message.. Curious why some people are and I am not.. Guess I could try a clean install.. I am running current open-vm-tools..
I am not using zfs that is for sure.. But I could try installing pfsense clean and freebsd clean and see if I can get it to come up..
-
Here is the warning
-
Yeah I do not get that.. Wow 8 cpus for your pfsense - bit of overkill ;) heheeh
-
Yeah I do not get that.. Wow 8 cpus for your pfsense - bit of overkill ;) heheeh
Smoke'm if you got'em?
-
I just bumped pfsense to
2.4.0-RC (amd64)
built on Mon Oct 09 17:58:12 CDT 2017
FreeBSD 11.1-RELEASE-p1And now I am getting it.. Hmmmmmm?
edit:
I just closed that notice with its little x, and then logged out of esxi, then back in.. And doesn't seem like its coming back?? Huh… Wonder if it only comes up if your watching pfsense boot on esxi? -
Looks like it could be a FreeBSD issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=220923 and/or https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=217282
Seems intermittent and doesn't appear to happen to everyone, not many hits out there for it.
Maybe something in the video/console settings of the virtual hardware itself.
I'm seeing this vga_bitblt_text() bug as well in VMs.
I had no success varying most of the guest VM vga configuration - ram from 4M to 256MB, with or without 3d support, etc.
It occurs in VMs with both legacy bios and EFI bios.
On the bright side, it is intermittent – about 1/4 of reboots. It seems to occur early enough that file system damage doesn't seem to be an issue when invoking a reboot in the debugger.
-
Yeup the hangs I mentioned earlier are from that vga_bitblt_text() issue… Tried all sorts of things...
One VM is an upgrade from 2.3.x, another was installed using a snapshot image a while back, accepting the defaults all the way through. The third one is a copy of the first VM.
The hanging at boot is very random for me, but thankfully it happens before disk access occurs from the looks of things.
For the most part, the message is an annoyance in my log files, a very big one, the real issue now seems to be more or less vga_bitblt_text() causing a hang which is outside of the hands of PFSense it seems... :(
Going to have to find a snapshot and use that one till I know this is fixed as this (the hanging issue more specifically now) is (I know it shouldn't be...) in a production environment and we kill everything at night to save money on the light bill and everything auto-starts in the mornings.
I just closed that notice with its little x, and then logged out of esxi, then back in.. And doesn't seem like its coming back?? Huh… Wonder if it only comes up if your watching pfsense boot on esxi?
If you switch views a few times, or log in a day later it usually pops right back up, and when viewing your VM's it will keep bouncing between Warning and Normal on the status for it.
I wonder if whoever maintains the VM Tools Package for PFSense could make modifications to report the "proper" OS?
-
"we kill everything at night to save money on the light bill and everything auto-starts in the mornings."
Wow… what a BAD idea that is! So did you do the math on that? What exactly is your host drawing at night when cpus are all idle anyway?
So how many watts this host drawing? Now how much you pay per kwh, do the math for it being off at night.. What you save a $1.20 a month? ;) You eat up 10 years worth of saving with 1 oh shit this didn't boot..
-
The closet pulls ~650w minimum at all times, under load, the closet will reach about 1300w, it's not just the host that gets killed at night either. Switches (that's about 140w alone), 4 satellite modems (between 20w and 45w each depending on weather conditions, signal quality and other factors), and other devices all get powered off shortly after the host shuts down and back on automatically when the host starts back up.
It also keeps the AC from having to run as much at night even though it's easier to cool at night, it still saves on the bill.
No need to do the math, real world testing I average between $20 to $45 lower on the bill on months that I kill everything. While that doesn't seem like a lot per month, over the course of a year, that's a nice savings that can go to other things :)
-
I wonder if whoever maintains the VM Tools Package for PFSense could make modifications to report the "proper" OS?
The pfSense package only uses the FreeBSD port. This issue also affects FreeBSD, so any fix needs to happen on FreeBSD and then it will make its way into our package after.
Maybe it just hasn't shown up yet, but I used "Upgrade VM Compatibility" to upgrade two VMs to "VM version 13", or ESX 6.5 level, and they no longer report the version mismatch warning.
