New 502 Bad Gateway

BreeOge · Oct 11, 2017, 5:40 PM

I need specifics. Exact error messages, a list of features enabled in pfBlocker, etc. It's nice to know that it appears isolated there, so the impact isn't too large, but there isn't enough to go by here yet.

Ill get that info for you sir..

BreeOge · Oct 11, 2017, 6:32 PM

@doktornotor:

@jimp:

Is this happening on current 2.4.0 snapshots or only 2.4.1?

You know it'd be a whole lot easier to trace if you stopped the ridiculous "top secret" kernel commits. Annoying, stupid, plus no credits for screaming about open-source solutions and playing retarded games like this.

Well, you know your comments about it being overloaded was annoying, stuipd, because it was the first thing I tried before I even posted about the issue. But I didn't say anything negative to you about it, thought maybe I had missed something. I hadn't but I didn't slam you for the suggestion, because all we want is to find the fix. You want to say its got nothing to do with the kernel, yet it only happened when the kernel was updated. So not to ridiculous as you say, It may not be the Kernel itself, its probably something else, but that is as close as we have to go on since it effects multiple things. You concentrate on one thing, and refuse to read what everyone else says its also doing. It's probably a fix that can be done in pfBlockernNG to conform to 11.1. We are trying to get to the solution, what are you doing? Complaining and giving us old threads that we have already tried.

Definition of insanity = doing the same thing over and over again and expecting different results.

We appreciate you trying to help, but having the i'm better than you attitude is not helping anyone or this problem. So in the future do not say anything is ridiculous if your not assisting in TRACING the issue. I would be happy to do any tracing to find the issue, like me and other have stated. Nothing in the System.log, nothing in the php log. If you have any suggestions on other logs that could help track down the issue please post them, I will try them in a heartbeat. But don't call anyone or anything ridiculous, that is no different than you saying you are a know it all. All the suggestions you suggested were Kernel suggestions. I thought you knew what you was talking about so thats why we say Kernel.

Thank you, now lets please resolve this issue without belittling people.

BreeOge · Oct 11, 2017, 6:50 PM

@BreeOge:

@jimp:

I need specifics. Exact error messages, a list of features enabled in pfBlocker, etc. It's nice to know that it appears isolated there, so the impact isn't too large, but there isn't enough to go by here yet.

Ill get that info for you sir..

My config for pfBlocker

General Default settings.
DSNBL Default settings
I have 2 DSNBL Feeds, mostly for ads, and Malware
I have an IPv4 list, block Malware and torrents and sip attacks.
No Reputation
No Geoip locations selected

The only Error messages we get are 502 Bad Gateway, but we can not access SSH without closing out process with CTRL-Z, and commands such as find, ect do not work. they just hang.

Thank you

Can someone else that is also having this problem give the pfBlocker settings, maybe we can find a common element.

john_galt · Oct 11, 2017, 6:56 PM

I will when I get home.

Doug

doktornotor · Oct 11, 2017, 7:03 PM

@BreeOge:

It's probably a fix that can be done in pfBlockernNG to conform to 11.1. We are trying to get to the solution, what are you doing? Complaining and giving us old threads that we have already tried.

No, it cannot. pfBlockerNG is merely using the pf firewall, that's it. It's using lighttpd as a 1x1 px webserver, not even nginx. It's using Unbound as resolver to redirect the requests to that webserver. It's doing absolutely nothing that should cause any box to hang and become unresponsive.

@BreeOge:

Thank you, now lets please resolve this issue without belittling people.

Sorry to have upset you. The only cases of the 502 Bad Gateway I (and pretty much anyone else) have seen been caused by simply not enough processes to serve the nginx/php-fpm requests (and/or exhausting the connections limit altogether). Now I'll need to get a crystal ball for cases when someone goes on secret commit spree that eventually makes a giant kaboom with pretty much every core package out there.

The devs can perhaps assist with tracing, meanwhile I'm simply once again annoyed by the course taken here. We've had this some ~3 years ago when the repos have been taken offline altogether, accompanied by some giant noise about trademark violations. It's getting old. Waste of time. Annoying. Disrespectful to people who've been contributing to pfSense, even after that CLA/copyright assignment/re-licensing nonsense etc. People wanting to build this thing for development purposes get absolutely zero assistance whatsoever and are being deliberately sabotaged by the so-called build scripts.

Open-source touted all over the website, and all you get is this. Getting on a tipping point again here.

jimp · Oct 11, 2017, 7:48 PM

@BreeOge:

DSNBL Default settings
I have 2 DSNBL Feeds, mostly for ads, and Malware

Approximately how many clients do you have on your local network that hit DNSBL? Any idea how busy it usually is?

@BreeOge:

The only Error messages we get are 502 Bad Gateway, but we can not access SSH without closing out process with CTRL-Z, and commands such as find, ect do not work. they just hang.

Most likely you just need to start a proper shell, try running /bin/tcsh

BreeOge · Oct 11, 2017, 8:00 PM

@jimp:

@BreeOge:

DSNBL Default settings
I have 2 DSNBL Feeds, mostly for ads, and Malware

Approximately how many clients do you have on your local network that hit DNSBL? Any idea how busy it usually is?

@BreeOge:

The only Error messages we get are 502 Bad Gateway, but we can not access SSH without closing out process with CTRL-Z, and commands such as find, ect do not work. they just hang.

Most likely you just need to start a proper shell, try running /bin/tcsh

I have one site that has currently has

LAN 192.168.1.175 192.168.1.199 = 5 users
LAN 192.168.1.5 192.168.1.174 = 19 users

This site will lock up in less than 12 hours.

Another site

LAN 192.168.1.41 192.168.1.50 = 3 users
LAN 192.168.1.5 192.168.1.40 = 4 users

It will take up to 24 hours.

and another

Interface Pool Start Pool End # of leases in use
LAN 192.168.16.50 192.168.16.75 = 5 users

This one will take up to 24 to 48 hours. However since the last update 2.4.0.r.20171009.1758 it has been happening more frequent around every 12 hours itself.

I currently have the pfBlockerNG uninstalled on the top 2 because they are used for apartments, and didn't want to bug the tenants when it locks up the CP becomes unresponsive. However for testing purpose I do re-install, and let it run with any changes for testing. I can usually get a crash within 6 to 12 hours. or less sometimes.

Just a note the amount of users, has not changed from before to after this issue started. Load has remained the same.

Thank you, I will test the /bin/tcsh and see if that gives me a good shell again. I will test that now on the top 2, will have a result back after it crashes.

Thank you, any logs you would like to see, please let me know I will post as much as I can.

BreeOge · Oct 11, 2017, 8:03 PM

@doktornotor:

[
The devs can perhaps assist with tracing, meanwhile I'm simply once again annoyed by the course taken here. We've had this some ~3 years ago when the repos have been taken offline altogether, accompanied by some giant noise about trademark violations. It's getting old. Waste of time. Annoying. Disrespectful to people who've been contributing to pfSense, even after that CLA/copyright assignment/re-licensing nonsense etc. People wanting to build this thing for development purposes get absolutely zero assistance whatsoever and are being [url=https://forum.pfsense.org/index.php?topic=109089.0]deliberately sabotaged by the so-called build scripts.

Open-source touted all over the website, and all you get is this. Getting on a tipping point again here.

I never knew about that, I do not have any bad intentions for this. Sorry if I came off that way, I was not aware.

jimp · Oct 13, 2017, 5:34 PM

If it is related to memory or a connection or network queue, then in particular the output of these could be helpful:

/usr/bin/netstat -Ln
/usr/bin/netstat -xn
/usr/sbin/swapinfo -h
/usr/bin/top | /usr/bin/head -n7
/bin/ps uxawwd
/usr/bin/sockstat

Attach the output in a text file as it will be too large to put inline on a forum post.

john_galt · Oct 11, 2017, 8:46 PM

I got home and my pfSense GUI and Serial Console was unresponsive. As stated earlier from a client point of view everything worked, wired and wireless connections in and outbound.

My setup is is almost the same as BreeOge's, with even less users. Only me with a lot of gadgets. When I left for work at 6am I had just restarted and everything worked. When I got home at 4pm it was in the reported condition.

2.4.0-RC (amd64)
built on Mon Oct 09 17:58:12 CDT 2017
FreeBSD 11.1-RELEASE-p1

What else can I provide?

Edit…. I also have openVPN with one user.

Doug

AhnHEL · Oct 11, 2017, 8:49 PM

I have one box using the ZFS file structure, the other is using UFS, both using pfBlockerNG. The ZFS is rock solid, and the UFS one gets the Bad Gateway after some time. Wondering if that is a possible reason why two similar boxes with similar settings exhibit different behavior using the same snapshot and same packages.

Both running 20171009 Snapshots for 2.4.0

Just a thought

john_galt · Oct 11, 2017, 8:53 PM

AhnHEL

I don't know but I had planned to do a fresh install of my UFS pfSense to ZFS this weekend and restore the same config.

Doug

BreeOge · Oct 11, 2017, 11:42 PM

@AhnHEL:

I have one box using the ZFS file structure, the other is using UFS, both using pfBlockerNG. The ZFS is rock solid, and the UFS one gets the Bad Gateway after some time. Wondering if that is a possible reason why two similar boxes with similar settings exhibit different behavior using the same snapshot and same packages.

Both running 20171009 Snapshots for 2.4.0

Just a thought

Very interesting mine are UFS as well..

john_galt · Oct 11, 2017, 11:53 PM

BreeOge

I have a time frame on my pfSense. I had to reboot when I got home at 4pm. It's now 7:50pm and I am getting the 502 Bad Gateway error. I'm going to reboot and scrub the system log between those times and if someone want's to look at it fine. Regardless I'm going ahead with my plans to reinstall this weekend.

Doug

BreeOge · Oct 12, 2017, 2:37 AM

It locked, here is the logs from the info you wanted.. This is from my heavier load box. My low load box also crashed, I will make a new post for it.

# /usr/sbin/swapinfo -h
Device          1K-blocks     Used    Avail Capacity
/dev/gptid/d2a5a9dd-7e41-11e7-b   3684016       0B     3.5G     0%

# /usr/bin/top | /usr/bin/head -n7
last pid: 50984;  load averages:  0.07,  0.14,  0.15  up 0+23:33:41    21:18:05
134 processes: 1 running, 131 sleeping, 2 stopped

Mem: 1036M Active, 2017M Inact, 1009M Wired, 693M Buf, 3775M Free
Swap: 3598M Total, 3598M Free

/usr/bin/netstat -Ln
Current listen queue sizes (qlen/incqlen/maxqlen)
Proto Listen                           Local Address
Netgraph sockets
Type  Recv-Q Send-Q Node Address   #Hooks
ctrl       0      0 [1b31]:           0
ctrl       0      0 [1b22]:           0
ctrl       0      0 [1ad8]:           0
ctrl       0      0 [1ad2]:           0
ctrl       0      0 [14fb]:           0
ctrl       0      0 [5]:              0
unix  100/0/200                        /var/run/clamav/clamd.sock
unix  0/0/80                           /tmp/mysql.sock
unix  0/0/5                            /var/run/dpinger_WAN_DHCP~70.178.22.158~70.178.22.1.sock
unix  0/0/4                            /var/run/devd.pipe
unix  0/0/30                           /var/run/check_reload_status
unix  193/0/128                        /var/run/php-fpm.socket
unix  0/0/4                            /var/run/devd.seqpacket.pipe

Had to pastbin /usr/bin/netstat -xn

https://pastebin.com/RKzat3ue

BreeOge · Oct 12, 2017, 2:39 AM

This is on my lower load box

# /usr/sbin/swapinfo -h
Device          1K-blocks     Used    Avail Capacity
/dev/label/swap0  33554428       0B      32G     0%

# /usr/bin/top | /usr/bin/head -n7
last pid: 31956;  load averages:  0.02,  0.07,  0.07  up 0+07:41:27    21:21:32
96 processes:  1 running, 93 sleeping, 2 stopped

Mem: 601M Active, 1095M Inact, 1002M Wired, 636M Buf, 13G Free
Swap: 32G Total, 32G Free

Current listen queue sizes (qlen/incqlen/maxqlen)
Proto Listen                           Local Address
Netgraph sockets
Type  Recv-Q Send-Q Node Address   #Hooks
ctrl       0      0 [23c]:            0
ctrl       0      0 [22b]:            0
ctrl       0      0 [1e3]:            0
ctrl       0      0 [199]:            0
ctrl       0      0 [f]:              0
ctrl       0      0 [5]:              0
unix  100/0/128                        /var/run/clamav/clamd.sock
unix  0/0/5                            /var/run/dpinger_WAN_DHCP~70.178.196.154~70.178.196.1.sock
unix  0/0/5                            /var/run/dpinger_Steve_Telephone~192.168.16.2~10.10.10.2.sock
unix  0/0/5                            /var/run/dpinger_Raymond_Telephone~192.168.16.2~10.10.12.2.sock
unix  0/0/5                            /var/run/dpinger_Kevin_Telephone~192.168.16.2~10.10.11.2.sock
unix  0/0/5                            /var/run/dpinger_Cisco_Router~192.168.16.2~192.168.16.201.sock
unix  0/0/4                            /var/run/devd.pipe
unix  0/0/30                           /var/run/check_reload_status
unix  13/0/128                         /var/run/php-fpm.socket
unix  0/0/4                            /var/run/devd.seqpacket.pipe

Pastbin for /usr/bin/netstat -xn

https://pastebin.com/6tEs3Fs0

jimp · Oct 12, 2017, 2:37 AM

Lots of port 1344, do you have squid+clamav active as well? Can you try shutting that off?

Also that netstat -x output is too big to put inline, you should attach that in a .txt file

BreeOge · Oct 12, 2017, 2:45 AM

@jimp:

Lots of port 1344, do you have squid+clamav active as well? Can you try shutting that off?

Also that netstat -x output is too big to put inline, you should attach that in a .txt file

I disabled squid+Clamav, when it crashes ill get ya the logs again for that as well.

john_galt · Oct 12, 2017, 12:33 PM

Hi

This morning I could not connect to the GUI nor was the serial console working. I rebooted then downloaded the system.log
It was nothing but what you see below. I only posted the last few lines before I restarted the firewall. I hope this helps.

Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:40 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:41 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:42 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:43 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:44 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:43:45 pfSense check_reload_status: Could not connect to /var/run/php-fpm.socket
Oct 12 05:44:37 pfSense syslogd: kernel boot file is /boot/kernel/kernel
Oct 12 05:44:37 pfSense kernel: Copyright (c) 1992-2017 The FreeBSD Project.
Oct 12 05:44:37 pfSense kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 12 05:44:37 pfSense kernel: The Regents of the University of California. All rights reserved.
Oct 12 05:44:37 pfSense kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Oct 12 05:44:37 pfSense kernel: FreeBSD 11.1-RELEASE-p1 #82 r313908+d77c47fe50c(RELENG_2_4_0): Mon Oct  9 18:04:16 CDT 2017
Oct 12 05:44:37 pfSense kernel: root@buildbot2.netgate.com:/builder/ce-240/tmp/obj/builder/ce-240/tmp/FreeBSD-src/sys/pfSense amd64
Oct 12 05:44:37 pfSense kernel: FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
Oct 12 05:44:37 pfSense kernel: VT(efifb): resolution 800x600
Oct 12 05:44:37 pfSense kernel: CPU: Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz (1596.34-MHz K8-class CPU)
Oct 12 05:44:37 pfSense kernel: Origin="GenuineIntel"  Id=0x306d4  Family=0x6  Model=0x3d  Stepping=4
Oct 12 05:44:37 pfSense kernel: Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Oct 12 05:44:37 pfSense kernel: Features2=0x7ffafbbf <sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,sdbg,fma,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,x2apic,movbe,popcnt,tscdlt,aesni,xsave,osxsave,avx,f16c,rdrand>Oct 12 05:44:37 pfSense kernel: AMD Features=0x2c100800 <syscall,nx,page1gb,rdtscp,lm>Oct 12 05:44:37 pfSense kernel: AMD Features2=0x121 <lahf,abm,prefetch>Oct 12 05:44:37 pfSense kernel: Structured Extended Features=0x21c27ab <fsgsbase,tscadj,bmi1,avx2,smep,bmi2,erms,invpcid,nfpusg,rdseed,adx,smap,proctrace>Oct 12 05:44:37 pfSense kernel: XSAVE Features=0x1 <xsaveopt>Oct 12 05:44:37 pfSense kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Oct 12 05:44:37 pfSense kernel: TSC: P-state invariant, performance statistics
Oct 12 05:44:37 pfSense kernel: real memory  = 8589934592 (8192 MB)
Oct 12 05:44:37 pfSense kernel: avail memory = 8168407040 (7790 MB)
Oct 12 05:44:37 pfSense kernel: Event timer "LAPIC" quality 600
Oct 12 05:44:37 pfSense kernel: ACPI APIC Table: <alaska a="" m="" i="">Oct 12 05:44:37 pfSense kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Oct 12 05:44:37 pfSense kernel: FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
Oct 12 05:44:37 pfSense kernel: random: unblocking device.
Oct 12 05:44:37 pfSense kernel: WARNING: Bogus Interrupt Polarity. Assume CONFORMS
Oct 12 05:44:37 pfSense kernel: WARNING: Bogus Interrupt Polarity. Assume CONFORMS
Oct 12 05:44:37 pfSense kernel: ioapic0 <version 2.0="">irqs 0-39 on motherboard
Oct 12 05:44:37 pfSense kernel: SMP: AP CPU #1 Launched!
Oct 12 05:44:37 pfSense kernel: SMP: AP CPU #3 Launched!
Oct 12 05:44:37 pfSense kernel: SMP: AP CPU #2 Launched!
Oct 12 05:44:37 pfSense kernel: Timecounter "TSC" frequency 1596341116 Hz quality 1000
Oct 12 05:44:37 pfSense kernel: random: entropy device external interface
Oct 12 05:44:37 pfSense kernel: wlan: mac acl policy registered
Oct 12 05:44:37 pfSense kernel: kbd1 at kbdmux0
Oct 12 05:44:37 pfSense kernel: netmap: loaded module
Oct 12 05:44:37 pfSense kernel: module_register_init: MOD_LOAD (vesa, 0xffffffff81158310, 0) error 19
Oct 12 05:44:37 pfSense kernel: random: registering fast source Intel Secure Key RNG
Oct 12 05:44:37 pfSense kernel: random: fast provider: "Intel Secure Key RNG"
Oct 12 05:44:37 pfSense kernel: nexus0
Oct 12 05:44:37 pfSense kernel: cryptosoft0: <software crypto="">on motherboard
Oct 12 05:44:37 pfSense kernel: padlock0: No ACE support.
Oct 12 05:44:37 pfSense kernel: acpi0: <alaska a="" m="" i="">on motherboard
Oct 12 05:44:37 pfSense kernel: acpi0: Power Button (fixed)
Oct 12 05:44:37 pfSense kernel: cpu0: <acpi cpu="">on acpi0
Oct 12 05:44:37 pfSense kernel: cpu1: <acpi cpu="">on acpi0
Oct 12 05:44:37 pfSense kernel: cpu2: <acpi cpu="">on acpi0
Oct 12 05:44:37 pfSense kernel: cpu3: <acpi cpu="">on acpi0</acpi></acpi></acpi></acpi></alaska></software></version></alaska></xsaveopt></fsgsbase,tscadj,bmi1,avx2,smep,bmi2,erms,invpcid,nfpusg,rdseed,adx,smap,proctrace></lahf,abm,prefetch></syscall,nx,page1gb,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,sdbg,fma,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,x2apic,movbe,popcnt,tscdlt,aesni,xsave,osxsave,avx,f16c,rdrand></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

After scrolling through all 6,000 lines of the system.log file I see several of these lines they appear to be at 1 minute intervals

Oct 12 05:43:10 pfSense kernel: sonewconn: pcb 0xfffff80008c430f0: Listen queue overflow: 193 already in queue awaiting acceptance (708 occurrences)

Some Googling returned this https://redmine.pfsense.org/issues/6406

jimp · Oct 12, 2017, 1:09 PM

@john_galt:

After scrolling through all 6,000 lines of the system.log file I see several of these lines they appear to be at 1 minute intervals
Oct 12 05:43:10 pfSense kernel: sonewconn: pcb 0xfffff80008c430f0: Listen queue overflow: 193 already in queue awaiting acceptance (708 occurrences)

For that, check the current value of kern.ipc.soacceptqueue (run "sysctl kern.ipc.soacceptqueue"). It's probably at the default of 128. Set that to 1024 or higher (e.g. 4096), make a tunable for that under System > Advanced, Tunables tab.