Virtual Router / Remove Host Connectivity
-
There isn't, it just straight to internet.. and so let me get this straight, two nics on the vm, give my host pc a static ip, make a NAT nic on the vm as WAN, then make a bridged nic for LAN?
and currently there is no configuration, id like to start over so im not fussing with a mess.
-
give my host pc a static ip
Give your pfSense LAN NIC a static IP. Your host computer will get a dynamic IP from the hotel.
make a NAT nic on the vm as WAN, then make a bridged nic for LAN?
Yes.
-
the thing is, im not sure how to specify the virtual nic, to connect to the physical nic in my pc, i dont see the option to give it the physical nic.. also i've booted up pfsense with a NAT was wan, and a bridged as lan, given the lan a 192.168.2.100 ip, and it told me to go to that to configure it, i also set up wan with dhcp, and it gave it 192.168.159.129/24, both wan and lan are /24 bit
-
i dont see the option to give it the physical nic
I don't have a multi-NIC rig so I don't know about that. Virtualbox allows you to select which NIC to map to. I assume VMware must have the same thing. Check your NIC config (I assume you added a second NIC to the VM?) and see if the vNIC properties let you choose your physical NIC.
it told me to go to that to configure it
That's right. You have to have a system on the LAN network to get access to the WebGUI. Try it from a wireless device that is not your PC. Make sure you have configured a DHCP server on LAN or your devices won't get an IP address.
-
ok ill get lan set up with dhcp, and ill try it with my tablet, (it runs normal windows), thank you so much for you help if this works, i really appreciate it.
also, will i be able to connect my host pc, my main host pc to this new virtual router? (i can use a third USB wifi adapter if need be)
-
btw in VMware, to ma a physical NIC to a vNIC, you need to use their Virtual Network Editor. I found this:
https://www.pluralsight.com/blog/it-ops/vm-workstation-advanced-networking
Look under the Custom Networking section.
-
I've set up everything how you said, second physical nic assigned to virtual nic, via bridging, assigning dhcp to wan and lan, assigning bridged nic to lan, nat to wan, and i still can't seem to get to the web configurator, im not sure how to access the network to get to it.
How are you testing? You can't use your PC. You have to use a device that is connected to the AP.
-
well i think i figured it out, i set it up just like you said, use my win 10 VM to set up the AP via webconfig, THEN, i can connect to it.. sorry if im acting stupid
-
I am inside the web config, and it seems to be working on my win 10 VM, but there isn't any internet getting through, wont let me hit google or anything, any idea's?
-
https://doc.pfsense.org/index.php/Connectivity_Troubleshooting
It could be lots of things.
