[SOLVED] VLAN Internet access
-
You have to change the interface to WAN in that rule. The rest is fine.
-
Still not working :'(
See attachments
-
Remove that Pass any any any rule from WAN before you do anything else, please.
-
Remove that Pass any any any rule from WAN
Step one Done
-
You do realize you are only passing http and https and things like ping won't work right?
-
Yea but still my Outside traffic gets blocked when coming in.
I have a Synology NAS den my VLAN and am trying to do a frameware update i keep getting 'Connection failed. Check you Internet connection.'
-
Your pass rules on DATA_NET interface have the source "LAN net". ??? Should be "DATA_NET net", I think.
-
Nice.
And you probably need a port forward to access your NAS from the outside.
https://doc.pfsense.org/index.php/How_can_I_forward_ports_with_pfSense
Most people here would probably recommend against a port forward (especially from source address any) and opt for a VPN instead.
-
No i don't think that's the problem.
It just not has internet access. It cannot grab firmware update from the internet. It has to do with something about the firewall rules.
-
You are bouncing all over the place from inbound to your NAS to outbound. Make sure you see the post by viragomann up there ^. That is certainly wrong.
https://doc.pfsense.org/index.php/Connectivity_Troubleshooting
-
Yea but i don't really get it… Why am seeing this in my firewall log
WAN Default deny rule IPv4 (1000000103) 37.143.0.0 (Public IP) 192.168.1.3 (Local IP) ICMP
My pfsense box is behind my ISP Router which is giving the pfsense box the private ip 192.168.1.3
But i keep seeing it get bocked by pfsense just after i try to search for new update for my Synology.P.S. I even try to put my Synology in my LAN Network everything is working perfectly but not when i put it back in my VLAN
-
Because there isn't a WAN rule passing the ICMP traffic from that
source (or from source any).https://doc.pfsense.org/index.php/Firewall_Rule_Basics
https://doc.pfsense.org/index.php/Firewall_Rule_Troubleshooting
Even the pass any any rule I asked you to delete would not have passed pings since it was for TCP/UDP-only, not ICMP (ping is ICMP).
-
Yes i got it working now.
I didn't select DATA_NET as Network Interfaces under DNS Resolver.
And i also added this rull.Now i have another issue/question… but i'll open a new post for that.
