Unofficial E2guardian package for pfSense
-
did you try clearing the cache?
Yes. After cleaning and restarting, few sites goes fine then all get mac error.
-
I'm getting NGINX errors, E2G seems to be forwarding the traffic to the NGINX server rather that directly to pfBlocker.
Does pfblockerNG package started redirecting or showing error pages on latest versions? The pfblocker versions I've used was just a deny rules creator, with any redirect.
-
I'm getting NGINX errors, E2G seems to be forwarding the traffic to the NGINX server rather that directly to pfBlocker.
Does pfblockerNG package started redirecting or showing error pages on latest versions? The pfblocker versions I've used was just a deny rules creator, with any redirect.
Nope, this was an ongoing problem since I enabled transparent proxy. pfBlocker has an option for blocking hosts - I have adblocking hosts files. The way it works is, it redirects those domains to pfBlocker's own internal web server in order to block them. They are getting intercepted by the proxy.
EDIT:
I have made a discovery Marcello. On normal non-debug E2Guardian which is setup with Squid. If Squid restarts, or needs to log rotate etc, it crashes E2Guardian. This doesn't seem to be the case with the debug version of E2Guardian, I have tried to replicate the issue but have been unsuccessful. Have you got any ideas?
-
did you try clearing the cache?
Yes. After cleaning and restarting, few sites goes fine then all get mac error.
Weird, I haven't got it yet. What authentication method are you using?
-
-
Weird, I haven't got it yet. What authentication method are you using?
IP address
Strange, no issues like the one you're describing on my end yet… Only issue I have is that when using it with Squid, from time to time E2Guardian crashes. And somehow... It doesn't crash when debug is enabled.
I'm also hoping you can help me out with the pfBlocker issue, am I doing something wrong?
-
Hi Marcello,
I just managed to re-produce the Mac Alert you've been getting by enabling SSL re-write and header re-write. I wonder if it is related to this: https://github.com/e2guardian/e2guardian/commit/c389e53b189e0d38108aca210dc217cb940bfec7
-
Hi Marcello,
I just managed to re-produce the Mac Alert you've been getting by enabling SSL re-write and header re-write. I wonder if it is related to this: https://github.com/e2guardian/e2guardian/commit/c389e53b189e0d38108aca210dc217cb940bfec7
I have this enabled too. Thanks for the test and report .
If you have time, do the same test with version 5.0.2_3
-
Hi Marcello,
I just managed to re-produce the Mac Alert you've been getting by enabling SSL re-write and header re-write. I wonder if it is related to this: https://github.com/e2guardian/e2guardian/commit/c389e53b189e0d38108aca210dc217cb940bfec7
I have this enabled too. Thanks for the test and report .
If you have time, do the same test with version 5.0.2_3
Have you got a compiled binary for it? I'll give it a shot for you, by the way I tested in both Chrome and Firefox. Both had the Mac error, where as IE complained about TLS. It does sound like a OpenSSL issue maybe but I am by no means an expert on E2Guardian's inner workings.
-
Yes, that debug version
pkg add -f https://e-sac.websiteseguro.com/e2g/e2guardian-5.0.2_3.txz -
Yes, that debug version
pkg add -f https://e-sac.websiteseguro.com/e2g/e2guardian-5.0.2_3.txzOn 5.0.2_3 SSL Re-write works and no Mac Alert issue. I think it might be that dependency, causing issues.
-
I've pushed a comiled package with code until commit bc7890a.
Seems to be working without latest patches for ssl on http1.1
version on repo:
e2guardian-5.0.2_7.txz -
I've pushed a comiled package with code until commit bc7890a.
Seems to be working without latest patches for ssl on http1.1
version on repo:
e2guardian-5.0.2_7.txzI knew that would be the issue!!! Great work! Now to find out why the new OpenSSL is giving this rather odd problem.
-
hi
do we need more time in our actual use of this package
-
Hi
with which program the reports are displayedLighsquid?
Squidanlyzer?how to config?
-
hi
do we need more time in our actual use of this package
What do you mean? It's working now, I've had to learn how the configs work etc. But it seems to be working fine.
-
Hi
with which program the reports are displayedLighsquid?
Squidanlyzer?how to config?
Lightsquid
If you are using e2guardian without squid, Apply this patch after lightsquid install.
fetch -o /usr/local/pkg/lightsquid.inc http://e-sac.siteseguro.ws/lightsquid/inc.txt
-
Hi
i made an error ı get an error
press save button
-
Apply the patch on lightsquid first.
-
Hi marcello
I think I'm doing something wrong
step-by-step screenshot
