Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    ATT Uverse RG Bypass (0.2 BTC)

    Scheduled Pinned Locked Moved
    Bounties
    80
    555
    1.0m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      nathanbradshaw
      last edited by

      I've been following this thread with a lot of interest - I also have AT&T fiber 1gbit/1gbit and would love to bypass the RG unit with pfSense hardware.

      I agree we're getting very close, and the remaining issue is VLAN0 support under FreeBSD.

      I'm not capable of doing much dev in this area, although I have a Netgate SG-3100 and would be happy to assist with testing.

      I also have an older Netgate APU4 pfSense hardware router.  If it is useful to anyone working on this solution, I would be happy to mail it to you - just reply or email me.

      1 Reply Last reply Reply Quote 0
      • B
        bulldog5
        last edited by

        @nathanbradshaw:

        I've been following this thread with a lot of interest - I also have AT&T fiber 1gbit/1gbit and would love to bypass the RG unit with pfSense hardware.

        I agree we're getting very close, and the remaining issue is VLAN0 support under FreeBSD.

        I'm not capable of doing much dev in this area, although I have a Netgate SG-3100 and would be happy to assist with testing.

        I also have an older Netgate APU4 pfSense hardware router.  If it is useful to anyone working on this solution, I would be happy to mail it to you - just reply or email me.

        I just tried the dumb switch method this evening and got it working with netgear gs105.  However, I had to statically assign my IP to the pfsense WAN, it wouldn't pull anything with DHCP.  What am I doing wrong?  I'm assuming when the lease expires its going to try to re-auth and i'll lose the connection?  My main switch is a procurve 2800 48port. I tried Tagging 3 ports with the same VLAN ID and the modem wouldn't AUTH at all going through there.

        1 Reply Last reply Reply Quote 0
        • G
          GPz1100
          last edited by

          ^^Try it with a basic dumb switch.

          1 Reply Last reply Reply Quote 0
          • B
            bulldog5
            last edited by

            @GPz1100:

            ^^Try it with a basic dumb switch.

            I did? a netgear GS105 is an unmanaged dumb switch.

            1 Reply Last reply Reply Quote 0
            • G
              GPz1100
              last edited by

              Strange.  I've tested this successfully with a cheap dlink 5 port switch and an asus rt-ac68u.  What color is the broadband light flashing on the rgw?

              1 Reply Last reply Reply Quote 0
              • B
                bulldog5
                last edited by

                @GPz1100:

                Strange.  I've tested this successfully with a cheap dlink 5 port switch and an asus rt-ac68u.  What color is the broadband light flashing on the rgw?

                I set my pfsense wan interface MAC to the same as the rgw and left as DHCP. I plug the rgw and ONT in the netgear switch. Let the broadband light go solid green, then unplug the RGW and plug the pfsense WAN nic in. pfsense WAN stays 0.0.0.0, never pulled an IP. So i tried it a 2nd time but used Static and that worked.

                1 Reply Last reply Reply Quote 0
                • G
                  GPz1100
                  last edited by

                  I haven't implemented pfsense yet, but under sophos utm it pulls an ip via dhcp within seconds.

                  Maybe pfsense has some advance options for dhcp that need to be adjusted?

                  Is your pfsense running baremetal or as a vm?

                  1 Reply Last reply Reply Quote 0
                  • B
                    bulldog5
                    last edited by

                    baremetal

                    1 Reply Last reply Reply Quote 0
                    • P
                      pyrodex
                      last edited by

                      @bulldog5:

                      @nathanbradshaw:

                      I've been following this thread with a lot of interest - I also have AT&T fiber 1gbit/1gbit and would love to bypass the RG unit with pfSense hardware.

                      I agree we're getting very close, and the remaining issue is VLAN0 support under FreeBSD.

                      I'm not capable of doing much dev in this area, although I have a Netgate SG-3100 and would be happy to assist with testing.

                      I also have an older Netgate APU4 pfSense hardware router.  If it is useful to anyone working on this solution, I would be happy to mail it to you - just reply or email me.

                      I just tried the dumb switch method this evening and got it working with netgear gs105.  However, I had to statically assign my IP to the pfsense WAN, it wouldn't pull anything with DHCP.  What am I doing wrong?  I'm assuming when the lease expires its going to try to re-auth and i'll lose the connection?  My main switch is a procurve 2800 48port. I tried Tagging 3 ports with the same VLAN ID and the modem wouldn't AUTH at all going through there.

                      You have to set your pfSense wan Mac to the Att RG MAC.

                      1 Reply Last reply Reply Quote 0
                      • B
                        bulldog5
                        last edited by

                        @pyrodex:

                        @bulldog5:

                        @nathanbradshaw:

                        I've been following this thread with a lot of interest - I also have AT&T fiber 1gbit/1gbit and would love to bypass the RG unit with pfSense hardware.

                        I agree we're getting very close, and the remaining issue is VLAN0 support under FreeBSD.

                        I'm not capable of doing much dev in this area, although I have a Netgate SG-3100 and would be happy to assist with testing.

                        I also have an older Netgate APU4 pfSense hardware router.  If it is useful to anyone working on this solution, I would be happy to mail it to you - just reply or email me.

                        I just tried the dumb switch method this evening and got it working with netgear gs105.  However, I had to statically assign my IP to the pfsense WAN, it wouldn't pull anything with DHCP.  What am I doing wrong?  I'm assuming when the lease expires its going to try to re-auth and i'll lose the connection?  My main switch is a procurve 2800 48port. I tried Tagging 3 ports with the same VLAN ID and the modem wouldn't AUTH at all going through there.

                        You have to set your pfSense wan Mac to the Att RG MAC.

                        Please see my previous post – this is the steps i took.

                        "I set my pfsense wan interface MAC to the same as the rgw and left as DHCP. I plug the rgw and ONT in the netgear switch. Let the broadband light go solid green, then unplug the RGW and plug the pfsense WAN nic in. pfsense WAN stays 0.0.0.0, never pulled an IP. So i tried it a 2nd time but used Static and that worked."

                        1 Reply Last reply Reply Quote 0
                        • K
                          Kaasalisk
                          last edited by

                          I have the same issue, cloned mac set to DHCP and only get 0.0.0.0. setting a static IP works.  I wanted to set it up as dhcp because I think that is what's required to stop the 14 day de-auth issue?

                          1 Reply Last reply Reply Quote 0
                          • B
                            bulldog5
                            last edited by

                            Same reason i'm trying to use DHCP, but nothing. Just tried it again yesterday evening, tried disabling, restarting the WAN interface.

                            1 Reply Last reply Reply Quote 0
                            • G
                              GPz1100
                              last edited by

                              If you have a spare hd, try installing opnsense or sophos utm.  I'm running the latter which is able to acquire ip via dhcp without issue.  Same with using an asus rt-ac68u router (by spoofing mac).

                              1 Reply Last reply Reply Quote 0
                              • B
                                bulldog5
                                last edited by

                                If i'm changing OS, its going to be because the EAP_PROXY works without swapping cables.

                                1 Reply Last reply Reply Quote 1
                                • K
                                  Kaasalisk
                                  last edited by

                                  I purchased a gs105ev2 to do the vlan flop and instantly pulled an IP via DHCP. Now I just have to figure out how to get DHCP6 working so I can use ipv6 too.

                                  1 Reply Last reply Reply Quote 0
                                  • B
                                    bulldog5
                                    last edited by

                                    so DHCP doesn't work with a dumb switch then. its the vlan tagging playing part of it.

                                    1 Reply Last reply Reply Quote 0
                                    • R
                                      random003
                                      last edited by

                                      I'm using a dumb switch. DHCP works with it.

                                      1 Reply Last reply Reply Quote 0
                                      • G
                                        GPz1100
                                        last edited by

                                        Random003  With pfsense?

                                        I tried both pfsense and opnsense with a dumb switch.  Was unsuccessful getting it to pull an ip.  No issues with utm or an asus router and dumb switch.  So it's something with pfsense and opnsense too as that didn't pull it either.  I'd say the mac is getting spoofed because when set statically there is internet connectivity.

                                        The dslr thread points to vlan priority being set.  Maybe that has something to do with it.

                                        1 Reply Last reply Reply Quote 0
                                        • R
                                          random003
                                          last edited by

                                          Yes with pfsense version 2.4.2-RELEASE-p1 (amd64).

                                          I'm spoofing the mac. The rest of the wan settings are default I think.

                                          https://imgur.com/a/5qla4UI

                                          1 Reply Last reply Reply Quote 0
                                          • G
                                            GPz1100
                                            last edited by

                                            ^^How odd.  What nic is your wan interface using?  Mine was intel based (igb), specifically the i340-t4 card (in pci passthrough mode with exsi).

                                            I think it would be useful to figure out why the dumb switch method works for some but not others with pfsense.  What I didn't try was using the same nic as a virtual (vmxnet3) adapter.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post