Display error on Pfsense 2.4.4 with IPSec IPV4/IPV6

[BN82]

Hello,

I think there is a small display error with IPsec.
I have an IPSEC VPN that will tunnel both an IPV4 and an IPV6 connection.
On the dashboard, I see 2 entry when I connect (1 for the IPV4 and 1 for IPV6) :

IPsec
Overview Tunnels Mobile
User IP Status
XXX 172.Y.Y.Y online
XXX 1 online

Problem is the IP for the IPV6 connection : it's just 1 instead of the IPV6 address.
On the Status/ IPSec / Lease page, host is also 1 for the IPV6 connection.

Rgds,
BN

[jimp]

Can you describe the connection in a bit more detail? Since you copied and pasted that output it removed a lot of the context and formatting.

Is that for a site to site or a mobile connection? Can you show a screenshot of the widget and status screen? How is your IPsec Phase 1 and Phase 2 configured?

You can redact some info like complete IP addresses and secrets/keys but we need a lot more info to go on here.

[BN82]

Hello,

Yes, this is a mobile connection. Here the configuration, tell me if you need more :

Rgds,
BN