OpenVPN - Problem
-
Good afternoon,
What range of ip should I put for my clients to receive when they connect in OpenVpn to connect to a VPN that I have configured Site to Site?
Example:
VPN Site-to-Site LAN / Vendor
LAN 192.168.10.0/24
OPEN VPN 172.20.10.0/24
How do I get network 172.20.10.0/24 to have VPN site-to-site LAN / Provider?
Just set up another tunnel on both sides?
Thank you.
-
If I'm reading correctly, it sounds like your subnets aren't routing between each other?
Set the local and remote networks correctly in the OpenVPN config
Add custom rule to OpenVPN as follows:push "route 192.168.10.0 255.255.255.0";
Make sure that firewall rules are set up - bearing in mind they only affect traffic coming in to the interface, and so can only deny traffic going out on that interface (not altogether).
HTH.