Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfSense 2.2 not passing traffic, but ping does get through

    Scheduled Pinned Locked Moved
    Virtualization
    20
    41
    34.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      jpsense42
      last edited by

      Hi,

      I have a fresh 2.2 install on a KVM guest. The host has two physical network interfaces (bridges), one LAN, one connected to my ISP router (LAN side of the router, so pfSense WAN side is a private network). pfSense has two virtio interfaces. I understand this setup causes double NAT, but I have no choice, my ISP does not allow other equipment or config changes to their router.

      The following fails:

      • Clients cannot reach the internet, no traffic gets passed. Ping DOES work however, see below!
      • pfSense console: telnet <isp router="" lan="" ip="">80 > no connection, seems pfSense itself cannot do anything but ping hosts
      • pfSense console: telnet <any webserver="">80 > no connection

      The following all works:

      • I can reach the webconfig via the LAN
      • LAN clients can ping everything, using pfSense as their gateway, all the way to 8.8.8.8 (!)
      • pfSense can ping everything, all the way to 8.8.8.8 and everything on the LAN
      • Clients connected directly to the ISP router can access the internet just fine

      The following config checks look OK to me:

      • Firewall rules are clean, default (allow LAN to access everything. automatic NAT)
      • Private networks are not blocked, bogon networks are not blocked on the WAN interface
      • Gateway (ISP router LAN side) is the default and only gateway and is UP
      • Double-checked IP addresses, subnet masks, gateways address.

      Version: 2.2-RELEASE, built on Thu Jan 22 14:04:25 CST 2015</any></isp>

      1 Reply Last reply Reply Quote 0
      • T
        Trel
        last edited by

        Are you able to ping by hostname or only by IP?
        (from both client machines and pfsense)

        1 Reply Last reply Reply Quote 0
        • J
          jpsense42
          last edited by

          Both. pfSense is able to resolve host names using 8.8.8.8. DNS lookup via the web configurator works.
          If I configure a LAN client to use pfSense as a local DNS server, lookups work too. So clients can ping google.com and they get replies.

          This is a copy/paste from diagnostics / DNS lookup:

          Resolve DNS hostname or IP
          Hostname or IP
          = 216.58.219.174

          Resolution time per server
          Server Query time
          127.0.0.1 5 msec
          8.8.8.8 107 msec
          8.8.4.4 87 msec
          More Information: Ping
          Traceroute
          NOTE: The following links are to external services, so their reliability cannot be guaranteed.

          IP WHOIS @ DNS Stuff
          IP Info @ DNS Stuff

          1 Reply Last reply Reply Quote 0
          • J
            jpsense42
            last edited by

            And this is a copy/paste from Diagnostics / Ping:

            PING google.com (216.58.219.78): 56 data bytes
            64 bytes from 216.58.219.78: icmp_seq=0 ttl=55 time=55.964 ms
            64 bytes from 216.58.219.78: icmp_seq=1 ttl=55 time=55.682 ms
            64 bytes from 216.58.219.78: icmp_seq=2 ttl=55 time=56.017 ms

            –- google.com ping statistics ---
            3 packets transmitted, 3 packets received, 0.0% packet loss
            round-trip min/avg/max/stddev = 55.682/55.888/56.017/0.147 ms

            1 Reply Last reply Reply Quote 0
            • F
              fragged
              last edited by

              So you can ping things by both IP and hostname -> everything is working? What is the actual issue here?

              1 Reply Last reply Reply Quote 0
              • J
                jpsense42
                last edited by

                If I set pfSense as my default gateway, I can ping, but I cannot access anything else. No ssh, no http. I was hoping pfSense would allow me to do more than just ping ;-)

                Edit: I just realized, ssh and http are TCP. Is it possible pfSense is passing UDP (DNS) and ICMP (ping) but not TCP?

                1 Reply Last reply Reply Quote 0
                • F
                  fragged
                  last edited by

                  Assuming you have the default "Default allow LAN to any rule" on LAN then it should pass everything through from LAN -> WAN. Check the firewall log and do a packet capture to see whats going on.

                  1 Reply Last reply Reply Quote 0
                  • D
                    doktornotor Banned
                    last edited by

                    Instead of letting people guess, why don't you just check/post firewall logs/rules here?

                    1 Reply Last reply Reply Quote 0
                    • J
                      jpsense42
                      last edited by

                      These (see attachment) are the LAN firewall rules. The WAN tab is empty.
                      Text version:

                      ID  Proto      Source  Port    Destination    Port    Gateway  Queue  Schedule        Description
                          *          *      *      LAN Address    80      *        *                      Anti-Lockout Rule
                          IPv4*      LAN net *      *              *      *        none                    Default allow LAN to any rule
                          IPv6*      LAN net *      *              *      *        none                    Default allow LAN IPv6 to any rule

                      Capture.PNG
                      Capture.PNG_thumb

                      1 Reply Last reply Reply Quote 0
                      • J
                        jpsense42
                        last edited by

                        As for the firewall log, it's empty. It did contain IP6 related entries. I disabled IP6 on the client, cleared the log and tried connecting to the internet via pfSense again. Nothing appeared in the log.

                        The system dashboard shows:
                        2.2-RELEASE (i386)
                        built on Thu Jan 22 14:04:25 CST 2015
                        FreeBSD 10.1-RELEASE-p4
                        Unable to check for updates.

                        pfSense is unable to check for updates, although it can ping the world, resolve host names and it's connected to a router that allows full internet access - clients connected directly to the ISP router can connect to anything on the internet.

                        I think: no TCP routing is happening here. Or it is happening, but no NAT is happening. The ISP router would not know what to do with non-NATted packets from the pfSense LAN side.

                        1 Reply Last reply Reply Quote 0
                        • J
                          jpsense42
                          last edited by

                          This is wat the NAT outbound rules look like. It's a fresh install, no changes.

                          Capture.PNG
                          Capture.PNG_thumb

                          1 Reply Last reply Reply Quote 0
                          • J
                            jpsense42
                            last edited by

                            Packet captures below. I can't see what's wrong from this, at least not yet.

                            Packet capture, LAN side.
                            Client 192.168.0.196 is trying to access Google (216.58.219.78:80)
                            pfSense LAN side is 192.168.0.252

                            19:06:53.285513 IP 192.168.0.252.53 > 192.168.0.196.60003: UDP, length 76
19:06:54.714668 IP 192.168.0.196.51332 > 216.58.219.78.80: tcp 0
19:06:54.841045 IP 192.168.0.196.56142 > 192.168.0.252.53: UDP, length 37
19:06:54.845216 IP 192.168.0.252.53 > 192.168.0.196.56142: UDP, length 77
19:06:54.846406 IP 192.168.0.196.51338 > 216.58.219.78.443: tcp 0
19:06:54.951584 IP 192.168.0.196.51333 > 216.58.219.78.80: tcp 0
19:06:55.291665 IP 192.168.0.196.51336 > 216.58.219.78.443: tcp 0
19:06:55.455828 IP 192.168.0.196.51337 > 216.58.219.78.443: tcp 0
19:06:56.671783 IP 192.168.0.196.51334 > 62.69.175.109.80: tcp 0
19:06:56.809020 IP 192.168.0.196.52478 > 192.168.0.252.53: UDP, length 28
19:06:56.810237 IP 192.168.0.252.53 > 192.168.0.196.52478: UDP, length 44
19:06:56.811612 IP 192.168.0.196.51339 > 216.58.219.78.80: tcp 0
19:06:57.062611 IP 192.168.0.196.51340 > 216.58.219.78.80: tcp 0

                            Same scenario, now WAN side. pfSense WAN is 192.168.7.252, ISP router is 192.168.7.254

                            19:07:51.898694 IP 192.168.7.252.27180 > 205.251.192.57.53: UDP, length 44
19:07:52.198428 IP 205.251.192.57.53 > 192.168.7.252.27180: UDP, length 196
19:07:52.204635 IP 192.168.7.252.56383 > 108.160.165.189.443: tcp 0
19:07:52.210622 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 35773, length 44
19:07:52.211711 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 35773, length 44
19:07:53.220143 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 36029, length 44
19:07:53.220916 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 36029, length 44
19:07:53.748700 IP 192.168.7.252.9196 > 216.58.219.78.443: tcp 0
19:07:54.008374 IP 192.168.7.252.38630 > 216.58.219.78.443: tcp 0
19:07:54.228310 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 36285, length 44
19:07:54.229275 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 36285, length 44
19:07:55.201675 IP 192.168.7.252.56383 > 108.160.165.189.443: tcp 0
19:07:55.267333 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 36541, length 44
19:07:55.268015 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 36541, length 44
19:07:56.307582 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 36797, length 44
19:07:56.308639 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 36797, length 44
19:07:56.712085 IP 192.168.7.252.24188 > 108.160.169.188.80: tcp 0
19:07:57.039836 IP 192.168.7.252.25088 > 62.69.166.210.80: tcp 0
19:07:57.303517 IP 192.168.7.252.27234 > 216.239.32.10.53: UDP, length 39
19:07:57.307442 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 37053, length 44
19:07:57.308079 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 37053, length 44
19:07:57.388742 IP 216.239.32.10.53 > 192.168.7.252.27234: UDP, length 44
19:07:57.394470 IP 192.168.7.252.8493 > 216.58.219.78.80: tcp 0
19:07:57.646223 IP 192.168.7.252.49477 > 216.58.219.78.80: tcp 0
19:07:58.320115 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 37309, length 44
19:07:58.320916 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 37309, length 44
19:07:59.330378 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 37565, length 44
19:07:59.331114 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 37565, length 44
19:07:59.743873 IP 192.168.7.252.9196 > 216.58.219.78.443: tcp 0
19:08:00.003967 IP 192.168.7.252.38630 > 216.58.219.78.443: tcp 0
19:08:00.339999 IP 192.168.7.252 > 192.168.7.254: ICMP echo request, id 14886, seq 37821, length 44
19:08:00.340785 IP 192.168.7.254 > 192.168.7.252: ICMP echo reply, id 14886, seq 37821, length 44
19:08:00.393862 IP 192.168.7.252.8493 > 216.58.219.78.80: tcp 0
19:08:00.640923 IP 192.168.7.252.49477 > 216.58.219.78.80: tcp 0
19:08:00.647629 IP 192.168.7.252.33846 > 216.239.34.10.53: UDP, length 48
                            1 Reply Last reply Reply Quote 0
                            • C
                              cmb
                              last edited by

                              Guessing some kind of checksum offloading problem. Which type of NICs are you using in KVM? Try disabling hardware checksum offloading under System>Advanced, Misc. Reboot afterwards to be on the safe side.

                              1 Reply Last reply Reply Quote 1
                              • J
                                jpsense42
                                last edited by

                                I found the setting under System > Advanced > Networking.

                                Disable hardware checksum offload
                                Checking this option will disable hardware checksum offloading. Checksum offloading is broken in some hardware, particularly some Realtek cards. Rarely, drivers may have problems with checksum offloading and some specific NICs.

                                I selected the checkbox and rebooted. No change. The pfSense VM can ping external hosts, but ssh from the pfSense console to an external ssh server does not work, clients cannot access the internet via pfSense.
                                These are my KVM NIC settings (virtio). br0 is LAN on the host, br1 is WAN.

                                 <interface type="bridge"><mac address="54:52:00:44:13:69"><source bridge="br0">
      <target dev="vnet4"><model type="virtio"><address type="pci" domain="0x0000" bus="0x00" slot="0x03" function="0x0">

    <interface type="bridge"><mac address="54:52:00:1d:48:7e"><source bridge="br1">
      <target dev="vnet5"><model type="virtio"><address type="pci" domain="0x0000" bus="0x00" slot="0x04" function="0x0">

</address></model></target></mac></interface> </address></model></target></mac></interface>
                                1 Reply Last reply Reply Quote 0
                                • B
                                  Bullz3y3
                                  last edited by

                                  I had this same problem with ProxmoVE. pfSense installed as KVM with "VirtIO" emulator which is default for KVM. WAN bride with eth0 and go out. Local bridge for LAN side of pfSense.

                                  Installed Windows & Ubuntu with VirtIO Driver. When Windows VM was set to go through pfSense I could ping but no internet no TCP/UDP connections at all. Same scenario. After bashing my head on the wall for whole sleepless night trying to resolve this. Finally I decided to setup XenServer instead of Proxmox which runs Xen hypervisor.

                                  Implemented the same setup in XenServer with all default settings. Windows was installed with default Realtek NIC driver. Alverything worked perfectly fine.

                                  When I installed xe-tools which turned Realtek NIC to "Xen Paravirtualized driver" it stopped work with same results as above. When I uninstalled xe-tools it worked again.

                                  Conclusion
                                  From this what I can see is Paravirtualzied drives are causing this issue in both setup. VirtIO in KVM & PV in Xen. With other NIC emulators like e1000 or Realtek it works fine.

                                  I haven't found a solution to get this working with para drivers which will improve the performance.

                                  J O M 3 Replies Last reply Reply Quote 2
                                  • Y
                                    yaplej
                                    last edited by

                                    I just ran into this issue too.  I have been beating my brain to figure out what the issue was.  Once I switched the vNICs to e1000 everything worked.

                                    1 Reply Last reply Reply Quote 0
                                    • T
                                      tier3
                                      last edited by

                                      how to change vNICs to e1000 in xenserver 6.5

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        mdima
                                        last edited by

                                        Hello,
                                        I am running in the same problem just, it is not a Virtual Machine, just a normal HP server with 4 Intel NICs…

                                        I already disabled the Hardware checksum offload, and disabled "fast IP forwarding", but on one of my server (the primary) after a reboot this happens... :S

                                        Thanks,
                                        Michele

                                        1 Reply Last reply Reply Quote 0
                                        • R
                                          RK57
                                          last edited by

                                          facing a similar issue since few days, have read almost every thread on this topic but couldn't make it work yet..!

                                          My network setup is as follows

                                          ISP modem to rl0 ie wan on pfsense , lan re0 to my switch box .

                                          everything was fine until last two days suddenly pfsense stopped giving access to the internet,, tried almost everything known but no success,, finally reconfigured the pfsense NO SUCCESS still.

                                          mine is a static IP connection ,
                                          I am able to ping anything and everything from the pfsense ping host using ip address aswell as the host-names, However i am not able to ping through the client using HOST-NAMES only IP address works and thats what i think is the problem,,

                                          ANY HELP would be heartily appreciated.. ! thanks in advance..

                                          1 Reply Last reply Reply Quote 0
                                          • KOMK
                                            KOM
                                            last edited by

                                            i am not able to ping through the client using HOST-NAMES only IP address works

                                            Sounds like a DNS issue.  Check your client DNS settings and work up from there.  What is DNS for your network? pfSense?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post