Load-Balance Server 2 WANS Client 2 WANS

[periko]

Hi guys.

I have a 2 sites that need to connect with a vpn like openvpn.
Both sites have 2 WAN's each, because we would like to load-balance ovpn.
pfsense ovpn server shared-key, what I have read is this, would like to know if this steps are correct?

Pfsense-SERVER LAN 192.168.1.0/24
-server-a wan1 10.0.0.10/30
-server-b wan2 10.0.0.20/30

Create a load-balance with the new ovpn gw's.

In my server LAN firewall rules, create a rule to cross all the traffic from my LAN to the other LAN(Client) using my new ovpn-gw load-balance interface.

Pfsense-cliente LAN 192.168.2.0/24
-client-a wan1 10.0.0.10/30 ==> server-a wan1 address
-client-b wan2 10.0.0.20/30==> server-b wan2 address

The same process, create ovpn interfaces, load-balance ovpn gw's, again create in my LAN firewall the rule to pass my traffic from client LAN 2 other LAN over this new load-balance ovpn-gw's.

Is correct?

Thanks.