Error TLS
-
Hello,
I have a 192.168.26.1 modem router with a 192.168.26.10 dmz connected to the pfsense WAN in 192.168.26.10
I have 2 separate network LAN1 (192.168.27.0) and LAN2 (192.168.28.0)I configured openvpn on pfsense as shown on this tutorial to connect to LAN1
everything went well
I downloaded the installation package via Client Export
on the client computer I installed the package and replaced the local ip with the public ip
but I get an error:
TLS key negociation failed
TLS handshake failedI have rules that are created automatically in the firewall
I do not understand what blocks, do you have an idea please?
thanks
-
What is your pfSense showing in the OpenVPN Server Log? Any notice for the OpenVPN Client connection?
When your pfSense is not directly connected to the Internet, maybe you need to forward the OpenVPN Ports from your Edge Router 192.168.26.1 to pfSense WAN 192.168.26.10 ?-Rico
-
What is your pfSense showing in the OpenVPN Server Log? Any notice for the OpenVPN Client connection?
When your pfSense is not directly connected to the Internet, maybe you need to forward the OpenVPN Ports from your Edge Router 192.168.26.1 to pfSense WAN 192.168.26.10 ?No nothing to the log
I don't think then the WAN is configured like a DMZ on the router -
The mentioned error is typical for a client not reaching the server.
Use Packet capture from the Diagnostic menu to investigate if the vpn packets arrive on the WAN interface to get sure.
Maybe they are blocked by the ISP or anywhere else. -
Nothing in packet capture
-
To check if the DMZ works on the router try to access your public address on other common ports like 80 or 443 while capturing on WAN.
-
I try but nothing in packet capture
the dmz don't working i think
i try to configure the modem like a bridge -
Thank you very much, I configured the modem bridge and pfsense PPPoE and all is ok !!!
Thanks