[2.4.x] Squid/ClamAV: Fix for C-ICAP 0.5.x not starting

ubernupe

@stephenw10
Dear stephenw10,
Thank you so very much for your assistance with helping me to get this straightened out. I followed your instructions and modified /usr/local/etc/c-icap/c-icap.conf.pfsense as detailed above in this post and then I issued command: chflags schg /usr/local/etc/c-icap/c-icap.conf.pfsense and everything works great. Thanks one more time and

Peace and God Bless,

ubernupe

sisko212

i can confirm @jvelez solution is working, even for 2.4.4 final release.
I set it from gui as @iqjet suggested

jimp

This is fixed now in the current version of the squid package. Update the package, or remove it and install it again, and it will work without manual changes.

sisko212

hello mr. @jimp
I updated squid package right now, disabling antivirus manual configuration but it doesn't start yet.
Re-enabling manual configuration and after a "reload", i still see two separate entries for ListeAddress and Port, and i had to do same modify as @jvelez suggested on first post.
Is maybe something left dirt on my pfsense configuration ?

occamsrazor

Thanks. The update seems to work for me but only after an uninstall/reinstall, not a straight upgrade.
One thing I noticed... when I did an uninstall/reinstall with the Proxy Server > General Settings box "Keep Settings/Data" UNCHECKED, followed by reboot just in case..... all my settings still remained.

sisko212

@occamsrazor thanks.
In my case I would not rather to leave "keep setting" unchecked, because destroys my previous configuration, that is a bit complex, and would require a bit of work to be recreated.

occamsrazor

@sisko212 said in [2.4.x] Squid/ClamAV: Fix for C-ICAP 0.5.x not starting:

@occamsrazor thanks.
In my case I would not rather to leave "keep setting" unchecked, because destroys my previous configuration, that is a bit complex, and would require a bit of work to be recreated.

Sure, I hear you. My point was that at least in my case having that box unchecked did not seem to have any effect at all - all my settings remained. Which would seem to imply to me that the function of this box is not working as it is intended.

sisko212

@occamsrazor Thanks.
I tried as your suggestion, and has worked.
But after disabling "keep setting" i had to completely de-installing squid, and then reinstalling from package list. The reinstall option only, didn't work.
Perhaps with reinstall option, some wrong configuration remains somewhere.
And yes... good to know, "keep setting" works differentely how i tought :-D... squid pfsense configuration stays there and is not deleted... maybe it delete only the squid configuration, not pfsense configuration, and then, when installing, it recreates the entire squid config.

Eden

Hello all

I am also having this issues with the ICAP service not starting. I have edited then config as requested above no joy. I then decided to reinstall the package but this did not make a difference. I have now uninstall the squid package completely and reinstalled it. Still the service will not start.

jimp

@eden said in [2.4.x] Squid/ClamAV: Fix for C-ICAP 0.5.x not starting:

Hello all

I am also having this issues with the ICAP service not starting. I have edited then config as requested above no joy. I then decided to reinstall the package but this did not make a difference. I have now uninstall the squid package completely and reinstalled it. Still the service will not start.

If that is the case then your problem is not the same problem as this thread. Start a new thread with details about your configuration, any error messages from logs, etc.