Acces WebGUI from Wan issue.
-
Block RFC1819 is turned off.
But as you can see on the printscreens the rule seems to work it says ESTABLISHED.i really don't get it.
-
Sniff on your wan side when making the the connection.
-
This is what i get, does this means something to you?
https://imgur.com/a/wQz1xp5
.10 my pc .75 wan ip of the pfsense.
-
Yeah nothing answered... Where did you sniff that at? On pfsense Wan?
You should get syn,ack back when you send a syn.
-
Yes i ran Wireshark on my pc 192.168.0.10 is that the good way to do so?
-
Doesn't show you if pfsense actually saw the traffic.. I would sniff on pfsense wan at same time.. Does pfsense send syn,ack but your clients just not seeing it.
You say this is all VM network right - that would be my guess where your problem is!!!
-
I just did it on the PfSense side and it sees the request and sends an ack.
-
Have you tried to clear Browser cache and/or Incognito Window?
When you open SSH on WAN side, is the connection working?-Rico
-
Yes i did have tried from other pc's also but same result.
I just launched an SSH from 192.168.0.10 to .75 (PfSense Wan) and captured from PfSense.
-
@ptibiskwi said in Acces WebGUI from Wan issue.:
I just did it on the PfSense side and it sees the request and sends an ack.
No it didn't - it answered an arp request, from your pic it is not sending back anything.. All I see it traffic to 443, no response from 443.
Same with your ssh - no response, just an answer to the arp request.
Did you edit your wan rules to allow ssh? What is in your floating rules if anything?
edit: Do you have any sort of port forwards that might be forwarding those ports or floating rules that would block them? You sure your rules loaded? Once you allowed the port?
