*Solved / OVPN client pfsense 2.4.4 -> to specific lan addresses as gateway not functioning as expected
-
Hi,
Having upgraded to 2.4.4 not sure at what point but this has stopped working.
I have couple VPN client session which are configured as gateways to specified lan address. Like this:https://support.nordvpn.com/#/Connectivity/Router/1136266682/Pfsense-2-4-3-Selective-Routing.htm
The problem is all my selective connection ie 192.168.0.18 & 192.168.1.40 is getting real public ip, not the VPN providers one..so nice :|
There seems to have gotten some changes as now the gateways have own tables for rules as it was not like this before, so what have I misconfigured can't understand myself.
- openvpn clients have connected
- there is rules for these internal ip addresses to go to trough vpn gateway
clients get real public ip :(
in old pfsense
- openvpn clients have connected
- there is rules for these internal ip addresses to go to trough vpn gateway
- clients get vpn providers ip
- if ovpn clients go down the hosts cannot communicate (kill switch)
#1 question: why is there no traffic going through ovpn gateways?
#2 question: what the heck should be put on new gateway firewall rule table .. allow all, not allow all, allow specific?thank ahead guys!!
image of settings -
Or to add either I have zero conntection or the connection is through public wan not the wanted gateway. Seems like if I tinker something or reboot the fw it either stops traffic to outside (not internal network) or connects through default wan gateway..
-
Hi,
Actually I got it figured out, it was compression problem!
Maybe here was too many things wrong and change of things, for one I used now different VPN service as earlier. For second there might have been something wrong in the rules as I when my public ip was in use on the host which should have not been.
Dunno, but now it is working as intended.- Connection is off when tunnel is down.
- Correct compression setting in the vpn config started the packet flow.
So ***Solved