Desktop with 1 lan set for router
-
@derelict said in Desktop with 1 lan set for router:
No idea what the capabilities of the Mikrotik are. Sorry.
All you need is a switch that can separate two VLANs and tag them to the pfSense port.
The mikrotik have capabilities for vlans: https://mikrotik.com/product/hap_ac2
But I don't know how to config -
The mikrotik have capabilities for vlans: https://mikrotik.com/product/hap_ac2
But I don't know how to config -
This is not a Mikrotik support forum. You might have better luck with that over there.
-
Ok, O know, I want to set pfsense router with a single lan., mikrotik like a switch.
-
https://docs.netgate.com/platforms/minnowboard/pfsense.html should be easy to adapt to other hardware.
-
@grimson thanks!
The pppoe connection Will be maked in pfsense ? -
@xplozia said in Desktop with 1 lan set for router:
@grimson thanks!
The pppoe connection Will be maked in pfsense ?I've been using pfSense and a ADSL modem (not a router !!) from my ISP for years.
pfSense initiated the PPPOE connection (a modem can do anything, it's a 'dumb' device) that converts ADSL POTS electrical signals to an Ethernet connection. -
While you can use a VLAN & managed switch, why not just put in a 2nd NIC? It makes things a bit simpler.
-
@jknott because I ușe a Little usff dell optiplex 780. I tryed with a USB lan, compatibile with Fred bsd, but the usb device losing connection.
-
I installed with success.
I set mikrotik like a Wisp AP - Bridge, I deleted DHCP rules and i create 1 vlan on eth5.
In PfSense I created 1 vlan, in Interfaces / Interface Assignments I associate WAN with PPPOE0(em0) created in PPPs like a Link Type - pppoe.
Now I have an Pfsense router with 1 single ethernet port for WAN and LAN.
Thanks!
