OpenVPN - ExpressVPN setup help.
-
https://www.expressvpn.com/support/vpn-setup/pfsense-with-expressvpn-openvpn/
I've followed this walk-through step by step and when I check the Status > OpenVPN it shows the status as UP. However when I go to Interfaces > OVPNC1 it won't allow me to change the ipv4 or ipv6 configuration. It says these are cannot be changed.
-
What are you trying to change there?
That interface is configured by OpenVPN. -
In the instructions it wants you to apply ipv4 to DHCP. I noticed at the end of the walk-through it has you create a firewall LAN rule and to select EXPRESSVPN_DHCP as the gateway. Unfortunately since I cannot make the IPv4 change early in the instructions it has my gateway interface as EXPRESSVPN_IPV4. This causes me DHCP/DNS issues when commiting the changes.
-
The tutorial seems to be old.
You have only to assign the interfaces to the OpenVPN instance and enable it and enter a proper name.
No further settings necessary.
