2.4.4-RELEASE-p3 error creating PPP interface

2lostkiwis

Not sure this is the correct place, but I hope so.
Fresh install on an SG-1100 updated to 2.4.4-RELEASE-p3.
Under Interfaces->PPPs->Add gives the following error:

[20-May-2019 15:57:54 Pacific/Auckland] PHP Fatal error:  Uncaught ArgumentCountError: Too few arguments to function get_country_name(), 0 passed in /usr/local/www/interfaces_ppps_edit.php on line 476 and exactly 1 expected in /etc/inc/pfsense-utils.inc:2825
Stack trace:
#0 /usr/local/www/interfaces_ppps_edit.php(476): get_country_name()
#1 /usr/local/www/interfaces_ppps_edit.php(526): build_country_list()
#2 {main}
  thrown in /etc/inc/pfsense-utils.inc on line 2825

Any ideas?
Cheers,Ian.

stephenw10

Did you have to create the PPP instance and save it to see that error? What type did you create?

I created a PPPoE connection on a clean 2.4.4p3 installed SG-1100 without error as a test.

Steve

Derelict

I cannot duplicate this simply by entering Interfaces > Assignments, PPPs, Add on an SG-1100.

There was certainly some work that was done regarding the list of country codes in this release but it was related to the certificate manager, not PPPs.

Perhaps you have something odd cached in the browser?

Else, what exactly are you doing when that triggers?

2lostkiwis

@stephenw10 @Derelict here's a video of the steps to produce. Happy to provide any futher information?
Cheers,
Ian.

https://youtu.be/JZ0vbetyFGw

Derelict

It does not crash when I do exactly that. Try it in a private browser window.

You are saying this is the FIRST thing you do after a fresh installation and upgrade to -p3?

2lostkiwis

@Derelict private browser window is exactly the same behavior. I have done some configuration, but nothing I would consider unusual, I will blow this away and try again. When I said fresh install, I meant I have not restored/uploaded a previous configuration.
Cheers,
Ian.

2lostkiwis

@Derelict okay, must have been something corrupt in the firware. I reinstalled the firmware as per the instructions, using a USB stick and console access. Adding a PPP now has no issues.
Thanks all for your help :-)

https://docs.netgate.com/pfsense/en/latest/solutions/sg-1100/reinstall-pfsense.html