Two factor authentication for openVPN in pfsense
-
Dear All,
Can someone knows, how to enable two factor authentication (google authentication or any other other trusted authentication tool) for OpenVpen in pfsense.
Regards,
Ashwani -
I'm not sure if OpenVPN support SAML, and I could not find any documentation. That's how I would assume you'd want it to work since the services you listed all support SAML as an authentication method.
-
We implemented 2 factor authentication using RCDevs (https://www.rcdevs.com). It's really great software and free up to 40 users.
When logging in using your OpenVPN client you enter your credentials like this:
Username: yourname
Password: password123456Where 'password' is your password and 123456 the OTP number from Google.
-
I managed to configure two factor authentication using LinOTP. The solution supports Google Authenticator and many other token types.
You can use it with your pfsense by binding it to your Radius server (I used freeRadius).
I can provide more help if you want.
-
This solution looks good - If only it was a one click package.
https://github.com/evgeny-gridasov/openvpn-otp
-
I managed to configure two factor authentication using LinOTP. The solution supports Google Authenticator and many other token types.
You can use it with your pfsense by binding it to your Radius server (I used freeRadius).
I can provide more help if you want.
Thanks hatimux for update!!!
can you please suggest me on this. I wants to enable two factor authentication for OpenVpn in pfsense.
Regards,
Ashwani Kumar -
I managed to configure two factor authentication using LinOTP. The solution supports Google Authenticator and many other token types.
You can use it with your pfsense by binding it to your Radius server (I used freeRadius).
I can provide more help if you want.
Hi Hatimux,
I'm hoping to use OpenVPN + LinOTP + Microsoft Active Directory (FreeRadius) - Do you think you might be able to help with some of your wisdom / knowledge in getting LinOTP working for you?
I basically want to be able to use 2-factor authentication (via Google Authenticator) when establishing a VPN connection via the OpenVPN client (as I believe you have done), but the twist for me is that I'd like to have the username / password be authenticated from Microsoft Active Directory (via enabling Network Policy and Access Services feature that allows for RADIUS connections to use AD usernames / passwords). So where you used FreeRadius, I'd like to use MS Active Directory w/NPS instead.
This guide (https://doc.pfsense.org/index.php/OpenVPN_with_RADIUS_via_Active_Directory) seems to give a good overview of how to get OpenVPN to authenticate against Active Directory using NPS. Would you be able to help fill in some of the details of how weave LinOTP into this process?
Thanks!
-
Since I authenticate to a radius server already I just added a duo proxy to a VM that's always running.
www.duosecurity.com
My users can't handle "technical" things like appending an OTP to their password but they can wait for their phone to buzz and manage to tap "Accept."
And what I really like about it is Duo will support EVERYTHING that supports RADIUS (or LDAP/AD) with no reliance on the product supporting your chosen 2FA solution, other than the ability to increase the authentication timeout to allow the user time to click accept. You just point the device at the Duo proxy instead of your normal authentication server.
-
I have an account setup for duo, but how do I integrate this into pfsense's openvpn or radius as I'm authentication with certificate + user/pw in radius as well.
Since I authenticate to a radius server already I just added a duo proxy to a VM that's always running.
www.duosecurity.com
My users can't handle "technical" things like appending an OTP to their password but they can wait for their phone to buzz and manage to tap "Accept."
And what I really like about it is Duo will support EVERYTHING that supports RADIUS (or LDAP/AD) with no reliance on the product supporting your chosen 2FA solution, other than the ability to increase the authentication timeout to allow the user time to click accept. You just point the device at the Duo proxy instead of your normal authentication server.
-
Point pfSense RADIUS at the duo radius proxy server you have to set up and point the proxy at your RADIUS server.
-
Point pfSense RADIUS at the duo radius proxy server you have to set up and point the proxy at your RADIUS server.
Ok so in user manager create another connection to the DUO proxy server and set that as authentication in the OpenVPN server ?
Then in the duoauthproxy.cfg, there's [radius_client] and [raidus_server_auto]
Which do I put in those?
-
Lots of documentation on the Duo site but ok:
authproxy.cfg
[ad_client]
host=
service_account_username=
service_account_password=
search_dn=This is the RADIUS Server
This proxy must be configured as a client on the server
[radius_client]
host=192.168.223.17
secret=*[radius_server_auto]
ikey=*
skey=*
api_host=api-xxx.duosecurity.comThis is pfSense
Set this proxy as the authentication server
Set OpenVPN to use it.
radius_ip_1=192.168.223.1
radius_secret_1=*This is another RADIUS client
radius_ip_2=192.168.223.219
radius_secret_2=*
failmode=safe
client=radius_client
port=1812 -
Yes I read the docs but I wasn't understanding what it means..
So basically radius client = the IP address of the duo proxy (VM in your case) is hosted on.
The radius server auto is the pfsense's radius server.
Is this how it works? :
1. OpenVPN will use the duoproxy (located on your VM) as radius auth
2. The DUO proxy will contact DUO server for push
3. DUO proxy will relay back the primary auth raidus to pfsense's (for username/pw in pfsense' freeradius)that correct?
-
-
pfSense asks the proxy if username/password is correct
-
The proxy asks the RADIUS server if the username and password are correct
-
If no, the proxy sends an Access-Reject back to pfSense
-
If yes, the proxy starts a duo authentication with the API server
-
If it fails, the proxy sends an Access-Reject to pfSense (this is why you need a longer timeout in the pfSense config - time for all this to happen. I use 60s)
-
If successful, the proxy sends Access-Accept to pfSense
Note that you are free to have a RADIUS server configured in System > User Manager, Servers that points to the RADIUS server and one that points at the Duo proxy. Then you can pick and choose which services must two-factor and which don't by selecting the appropriate authentication server in that service. You can test them in Diagnostics > Authentication.
-
-
So what your after is multifactor, not just 2 factor because by definition if your auth requires something you have and something you know you have your 2 factors.
The cert you have to have on your machine, and the password to said cert and or login would mean your already doing 3 factor. Something you have and 2 things you know. The cert is the thing you have, the password to said cert would be the 1 thing you know, and the username and password to auth to openvpn is the 2nd thing you know.
How is ssl/tls+user auth not meet 2 factor??
-
picky picky but correct. This would be two things he has (the private key and the duo phone) and one thing he knows (the username/password). And in my case the Duo app requires me to enter the phone passcode or TouchID in most cases, so there is another known factor or an are factor.
-
yeah you can go to many many factors.. Duplication of things is not always considered another factor
Normally you can go to 3 factor
something you have
something you know
something you are.My point is he already has 2 factors with the cert and the password.. Adding another just makes it harder to log in, for what possible reason? Is this a gov facility? There is being secure and taking steps to be secure and then there is just overhead and complication for no extra security.
To me the OTP thing, or use of some token that changes code ever so many seconds, etc. is just plain PITA.. And unless your line of work justifies the extra effort its just making it harder to get anything done.
Just my 2 cents on the whole matter… While I think such methods of auth are pretty cool, and fun to setup - actual use of them are PITA..
-
Thanks, this is working now as when I login to OpenVPN it pushes the DUO notification to click to accept, which is good enough for my uses, rather than enter a code which is annoying.
One thing I don't understand is, in the duo config on my duo proxy, both sections I had to put my pfSense ip address as the radius. Does that make sense? It works though…
-
pfSense asks the proxy if username/password is correct
-
The proxy asks the RADIUS server if the username and password are correct
-
If no, the proxy sends an Access-Reject back to pfSense
-
If yes, the proxy starts a duo authentication with the API server
-
If it fails, the proxy sends an Access-Reject to pfSense (this is why you need a longer timeout in the pfSense config - time for all this to happen. I use 60s)
-
If successful, the proxy sends Access-Accept to pfSense
Note that you are free to have a RADIUS server configured in System > User Manager, Servers that points to the RADIUS server and one that points at the Duo proxy. Then you can pick and choose which services must two-factor and which don't by selecting the appropriate authentication server in that service. You can test them in Diagnostics > Authentication.
-
-
The comments in the config file I posted are self-explanatory. Post yours so I can see what you're talking about.
The one in radius_client should be the actual RADIUS server that holds the usernames and passwords.
The one in radius_ip_1 is pfSense which is really a RADIUS client to the proxy (something that asks the proxy to do an authentication).
-
The comments in the config file I posted are self-explanatory. Post yours so I can see what you're talking about.
The one in radius_client should be the actual RADIUS server that holds the usernames and passwords.
The one in radius_ip_1 is pfSense which is really a RADIUS client to the proxy (something that asks the proxy to do an authentication).
Here is my config:
[radius_client]
host=10.10.10.1
secret=[radius_server_auto]
ikey=
skey=
api_host=
radius_ip_1=10.10.10.1
radius_secret_1=
failmode=safe
client=radius_client
port=1812Both IP are pointing to pfsense box's FreeRadius server.
Well since I'm hosting radius with pfsense, which has same IP, I guess they are both the same?
