Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Probleme mit hohen ports

    Deutsch
    2
    7
    3.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      MumieWL
      last edited by

      Hi ich habe nu so viele embedded sys durch
      und wollte eigend lich bei pf bleiben ….
      nur hier habe ich das selbe prob das wen ich
      die flatcastports 40121 - 40124 (UDP)  durchrouten will
      das es irgendwie scheiters .....
      weiss einer von euch evtl eine loesung ????

      1 Reply Last reply Reply Quote 0
      • H
        hoba
        last edited by

        Also entweder machst Du was falsch oder die Software ist besch…euert  ;D
        Was funktioniert nicht und wie hast Du das eingerichtet. Paste mal bitte Deine Portforwards und Firewallrules. Siehst Du den betreffenden Verkehr geblockt unter status>systemlogs, firewall? Beachte bitte auch daß die Reihenfolge der Regeln wichtig ist.

        1 Reply Last reply Reply Quote 0
        • M
          MumieWL
          last edited by

          so steht das in meiner xml dadei drinne

          <rule><protocol>udp</protocol>
                      <external-port>40120-40130</external-port>
                      <target>192.168.0.205</target>
                      <local-port>40120</local-port>
                      <interface>wan</interface>
                      <descr>Flatcast</descr></rule>

          <rule><type>pass</type>
                      <interface>wan</interface>
                      <protocol>tcp/udp</protocol>
                      <source>
                          <any><destination><any><port>40120-40130</port></any></destination>
                      <descr>NAT Flatcast</descr></any></rule>

          und in der NAT

          WAN  UDP  40120 - 40130  192.168.0.205  40120 - 40130  Flatcast

          und unter rules

          CP/UDP  *  *  *  40120 - 40130  NAT Flatcast

          eigend lich sollte das doch richtig sein

          oder teusche ich mich jetzt da ??

          Gruss Thomas

          1 Reply Last reply Reply Quote 0
          • M
            MumieWL
            last edited by

            bevor ich das vergesse aleanderen post
            vnc , esel shoutcast ftp ssh etc laufen ja alle und das wundert mich ja so sehr das
            eben halt diese ports nicht gehen

            1 Reply Last reply Reply Quote 0
            • H
              hoba
              last edited by

              Klingt für mich richtig. Der PC selbst hat keine Desktopfirewall? Siehst Du Blocks in den pfSense-Firewall-logs? Schau auch mal unter diagnostics>states, ob für die Verbindung states generiert werden. Wenn das passiert, dann ist Dein Problem nicht durch pfSense verursacht.

              1 Reply Last reply Reply Quote 0
              • M
                MumieWL
                last edited by

                ich habe da was unter status.php gefunden was mich nu ganz zu grübeln bringt

                NAT Inbound Redirects

                rdr on ng0 proto udp from any to 85.176.119.162 port 40120:40130 -> 192.168.0.204 port 40120:*

                Reflection redirects

                rdr on sis0 proto udp from any to 85.176.119.162 port { 40120 } -> 127.0.0.1 port 19000
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40121 } -> 127.0.0.1 port 19001
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40122 } -> 127.0.0.1 port 19002
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40123 } -> 127.0.0.1 port 19003
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40124 } -> 127.0.0.1 port 19004
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40125 } -> 127.0.0.1 port 19005
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40126 } -> 127.0.0.1 port 19006
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40127 } -> 127.0.0.1 port 19007
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40128 } -> 127.0.0.1 port 19008
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40129 } -> 127.0.0.1 port 19009
                rdr on sis0 proto udp from any to 85.176.119.162 port { 40130 } -> 127.0.0.1 port 19010
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40120 } -> 127.0.0.1 port 19011
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40121 } -> 127.0.0.1 port 19012
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40122 } -> 127.0.0.1 port 19013
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40123 } -> 127.0.0.1 port 19014
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40124 } -> 127.0.0.1 port 19015
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40125 } -> 127.0.0.1 port 19016
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40126 } -> 127.0.0.1 port 19017
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40127 } -> 127.0.0.1 port 19018
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40128 } -> 127.0.0.1 port 19019
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40129 } -> 127.0.0.1 port 19020
                rdr on ath0 proto udp from any to 85.176.119.162 port { 40130 } -> 127.0.0.1 port 19021

                self udp 80.132.212.209:40123 <- 192.168.0.202:40123      MULTIPLE:MULTIPLE
                self udp 212.202.148.210:40128 <- 192.168.0.202:40123      MULTIPLE:MULTIPLE
                self udp 192.168.0.202:40123 -> 85.176.119.162:60284 -> 80.132.212.209:40123      MULTIPLE:MULTIPLE
                self udp 192.168.0.202:40123 -> 85.176.119.162:56447 -> 212.202.148.210:40128      MULTIPLE:MULTIPLE

                @24 rdr on ath0 inet proto udp from any to 85.176.119.162 port = 40128 -> 127.0.0.1 port 19019
                  [ Evaluations: 0        Packets: 0        Bytes: 0          States: 0    ]
                @25 rdr on ath0 inet proto udp from any to 85.176.119.162 port = 40129 -> 127.0.0.1 port 19020
                  [ Evaluations: 0        Packets: 0        Bytes: 0          States: 0    ]
                @26 rdr on ath0 inet proto udp from any to 85.176.119.162 port = 40130 -> 127.0.0.1 port 19021
                  [ Evaluations: 0        Packets: 0        Bytes: 0          States: 0    ]

                also irgendwie bring mich das doch zum grübeln ich habe auf den rechnern KEINE interne FW am rennen das macht alles die PF für mich

                benutzen tuhe ich die 1.0 BETA2 embedded

                gruss thomas

                1 Reply Last reply Reply Quote 0
                • H
                  hoba
                  last edited by

                  Pobier mal "Disable NAT reflection" unter system>advanced (ganz unten).

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.