Suricata custom rule alerts but won't block
-
@bmeeks Oops, I apologize.
1 I'm running in legacy mode.
2 I'm not aware of a "Block on drops only" setting. I will look for it.
What do you mean by block which IP? How and where is that determined?
Pretty sure the test public IP I'm trying to block is not in my pass list because I have a different test rule that will block it on alert.
Ideally, I wanted suricata to block the remote IP when the SMTP server behind pfsense returns an auth failed message to the client. I reckon I could write to block on too many AUTH LOGIN attempts from a client? In fact, I have a test rule for that which does work. So maybe it has something to do with which direction the content message travels?
-
@kiokoman Hello,
What sets which IP to block? Is that the track by setting in the rule?
-
This post is deleted! -
-
@kiokoman said in Suricata custom rule alerts but won't block:
i think that the logic is that you see "Authentication failed" when $SMTP_SERVERS 25 answer back to $EXTERNAL_NET
and in this case the
"Which IP to Block" should be set to DST or BOTH after putting $SMTP_SERVERS to the white listYeah, you are correct on the rule logic. It was late last night when I posted and I was not thinking clearly ...
. -
@RedDelPaPa said in Suricata custom rule alerts but won't block:
This is the screen for the "Which IP to Block" setting. It literally means which IP out of the two contained in the IP header should be blocked (source or destination IP). However, the Pass List still applies; so if either of the IP addresses is in the Pass List then that IP won't be blocked.
-
Just for a test, rewrite the rule and omit the thresholding parameters. I wonder if the threshold logic might could be responsible for my custom blocking plugin not getting a copy of the alert.
-
@bmeeks Ok, here is the new version:
alert tcp $SMTP_SERVERS 25 -> $EXTERNAL_NET any (msg:"SMTP AUTH FAILED LOGON brute force attempt"; flow:from_server,established; content:"Authentication failed"; offset:54; nocase; classtype:suspicious-login; sid:1000005; rev:3;)
Again, it alerts, but no blocky.
-
@RedDelPaPa said in Suricata custom rule alerts but won't block:
@bmeeks Ok, here is the new version:
alert tcp $SMTP_SERVERS 25 -> $EXTERNAL_NET any (msg:"SMTP AUTH FAILED LOGON brute force attempt"; flow:from_server,established; content:"Authentication failed"; offset:54; nocase; classtype:suspicious-login; sid:1000005; rev:3;)
Again, it alerts, but no blocky.
Hmm...this is puzzling. There is another user (from Southeast Asia, I believe) that is having a similar problem with alerts but no blocks. His posts are in the IDS/IPS sub-forum. So far I have been unable to reproduce his issue as the same setup results in blocks in my test lab but not on his production system. I'm wondering if his is load related as his firewall is processing a ton of traffic as a hub for 170 school systems.
In your case I would not suspect loading as much, but I assume since you protecting a mail server that your firewall is for some type of business or other high user count environment. Is that true?
Suricata has a chain of processing that packets go through, and an API is provided that allows you to register your own custom plugin into that processing chain. That's how the Legacy Mode blocking module works in Suricata for pfSense. I wrote a custom plugin that registers itself as a "log output module". In this manner, Suricata is supposed to send my plugin a copy of every single alerting packet. My plugin then analyzes the IP addresses in the packet, compares them to the Pass List addresses, and blocks the IPs if they are not in the Pass List.
The actual alert logging, however, is done by the built-in Suricata
alert-fastmodule. That module is the one creating thealert.logfile that the GUI package then reads to display alerts on the ALERTS tab. So that means there could be a theoretical circumstance where an alert was channeled through thealert-fastmodule and thus logged, but that same alert did not make it to my custom blocking module. At least that's a theory I'm currently mulling around in my head.I've been reading through all the Suricata binary's source code trying to figure out what could possibly account for such a weird situation as experienced by the guy in Southeast Asia. Perhaps that situation is also applicable to you in some manner. I may try and get some assistance from the upstream Suricata developers to see if there is something I might be misunderstanding about the packet processing chain.
-
No, my pfsense box is for personal use. Loading is minimal.
Does my rule block for you on your test box?
I can make a rule that alerts and blocks if I have it check for content coming from the client instead of being sent by the smtp server.
-
@bmeeks There is also a default rule in the rule set that is almost exactly the same as mine, but I can't use it because it checks for content: Authentication unsuccessful. My server doesn't respond with that message to failed auth. My server uses: "Authentication failed".
-
@RedDelPaPa said in Suricata custom rule alerts but won't block:
No, my pfsense box is for personal use. Loading is minimal.
Does my rule block for you on your test box?
For me to adequately test your rule I would have to simulate the conversation between an SMTP server and client. I don't have the software immediately on hand to accomplish that.
I can make a rule that alerts and blocks if I have it check for content coming from the client instead of being sent by the smtp server.
Now this seems to validate my view that your problem is actually not a problem, it's simply a matter of a host being on the Pass List (or covered by a netblock that is within the Pass List). What are the IP addresses for the server and one of these clients? I assume they can't be in the same subnet if pfSense is seeing the traffic. I think you have a potential Pass List issue where your pass list is covering more than you think in terms of IP space. Having an IP on a Pass List will not prevent alerts, but it will prevent subsequent blocks from those alerts.
-
@bmeeks hmailserver is a super simple, free windows mail server that you could use for the test, if it's the mail server you're lacking. I use windows live mail for the mail client.
I don't think so. The remote IP is the public IP from a client who's computers I'm authorized to work on and maintain. I have remote access to his network. So occasionally I will use one of his workstations to hit back at my network for testing purposes. Pretty certain his public IP is not on any pass lists on my pfsense box.
My suricata pass list is empty. And his public IP is not listed anywhere in any of my firewall rules. Is there another place I'm not aware of?
Here's an example of a rule that both alerts and blocks the offending remote IP:
alert tcp $EXTERNAL_NET any -> any 25 (msg:"SMTP AUTH LOGON brute force attempt"; content:"AUTH LOGIN"; nocase; threshold:type threshold, track by_src, count 3, seconds 60; classtype:suspicious-login; sid:1000002; rev:1;) -
you can check your passlist from console, i don't know where in the gui is this options but anyway it's inside
/usr/local/etc/suricata/suricata_PIDOFSURICATA_INTERFACE/passlist
just noticed now that i have ip like 8.8.8.8 inside it that i don't remember i ever put ..
edit .. ok could be that one time was a DNS configured for pfsense but it was removed long time ago..̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
Please do not use chat/PM to ask for help
we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
Don't forget to Upvote with the 👍 button for any post you find to be helpful. -
@RedDelPaPa said in Suricata custom rule alerts but won't block:
Here's an example of a rule that both alerts and blocks the offending remote IP:
alert tcp $EXTERNAL_NET any -> any 25 (msg:"SMTP AUTH LOGON brute force attempt"; content:"AUTH LOGIN"; nocase; threshold:type threshold, track by_src, count 3, seconds 60; classtype:suspicious-login; sid:1000002; rev:1;)Your rule above that alerts and blocks is basically proving my point about a Pass List. Suricata (and Snort) generates a default Pass List that includes all of the IP subnets defined on the firewall interfaces with the exception of the WAN. For the WAN, the default Pass List only includes the actual WAN IP address. The default Pass List also includes your DNS Server(s), your default gateway and any defined Virtual IPs. You can see the contents of the default Pass List by going to the INTERFACE SETTTINGS tab for the interface you are running Suricata on and then scrolling down to click the View List button beside the Pass List drop-down selector. The content (IP addresses and subnet) of the default Pass List will display in a modal dialog.
Your SMTP server will most definitely be defined in that default Pass List (by the inclusion of the firewall locally-attached network where it resides). So that presence on the Pass List will prevent the the mail server from being blocked. Also, depending on exactly how the remote client's traffic comes back to the firewall (over a VPN, for example), it might also wind up being included on a Pass List as VPN addresses are also added to the default Pass List.
-
@kiokoman said in Suricata custom rule alerts but won't block:
you can check your passlist from console, i don't know where in the gui is this options but anyway it's inside
/usr/local/etc/suricata/suricata_PIDOFSURICATA_INTERFACE/passlist
just noticed now that i have ip like 8.8.8.8 inside it that i don't remember i ever put ..
edit .. ok could be that one time was a DNS configured for pfsense but it was removed long time ago..The passlist file is only updated when Suricata is stopped and restarted or when a ccnfiguration change is made in the Suricata GUI and saved. If you were to edit the DNS servers listed under the SETUP > GENERAL screen in pfSense, but then did nothing to Suricata's configuration, then your DNS server change would not be reflected until you restarted Suricata.
-
@bmeeks Yes I thought of that one already. I disabled his vpn connection to me before testing. And his public IP is definitely not on any pass lists.
I'm confused as to why the last rule I posted works, but the first one I posted does not.
If the last rule works, then clearly his public IP is not on a pass list?
-
@bmeeks just followed your directions and checked the suricata default pass list. His public IP is not on it.
-
@RedDelPaPa said in Suricata custom rule alerts but won't block:
@bmeeks Yes I thought of that one already. I disabled his vpn connection to me before testing. And his public IP is definitely not on any pass lists.
I'm confused as to why the last rule I posted works, but the first one I posted does not.
If the last rule works, then clearly his public IP is not on a pass list?
Are you sure that previous rule you posted is actually firing properly? For example, I would not expect your mail server to be responding on port 25 necessarily. The client should have initiated the TCP connection by having port 25 as the destination but having a random high port in the message for the SMTP server to reply back on. But to be honest I've never done a packet analysis is an email server's conversations with a client.
-
@bmeeks yes that last one i posted works on LOGIN AUTH being sent from the client to the server.
