Had my pfSense been compromised?
-
@akuma1x
Desktop contains list of desktop computers:
For sure it does not have the offending 103.240.140.10 in my first post.
-
And what is that rule - just look it up via
https://docs.netgate.com/pfsense/en/latest/firewall/viewing-the-full-pf-ruleset.htmlpfctl -vvsr
Will show you rule ID numbers so you can match up rules with what your seeing.. Unless the rule has been deleted.. You can look in your config change history.
-
I have gathered additional info on the port numbers:
These ports seem to be related to hostname, nameserver, smtp.
-
@bchan said in Had my pfSense been compromised?:
For sure it does not have the offending 103.240.140.10 in my first post.
Yes but it has your local FQDN. You sure that resolves correctly and not to some strange web IP? I'd never use local hostnames in Aliases.
-
@johnpoz
Nothing logged around that time (05:29):
-
look in your full rule set for what that ID number matches up with.
-
whois 103.240.140.10
inetnum: 103.240.140.1 - 103.240.142.255
netname: CTCL-HK
descr: ClearDDoS Technologies
country: HKIt sounds like a web security company.
-
I'm talking about your alias. Not the IP.
-
I have checked the table values for this alias and they all resolve correctly to 192.168.x.x
-
@bchan said in Had my pfSense been compromised?:
all resolve correctly to 192.168.x.x
LAPTOP-1CGD66U4 resolves to 192.168.x.x? Even on pfsense itself? Its resolvers?
-
-
@johnpoz said in Had my pfSense been compromised?:
pfctl -vvsr
pfctl -vvsr | grep 4294967295
return nothing. -
Then the rule was deleted, make sure your grep is working by using a ID in your command that you see when just looking at the output.
Are you currently seeing logs for this?
-
@johnpoz said in Had my pfSense been compromised?:
Then the rule was deleted, make sure your grep is working by using a ID in your command that you see when just looking at the output.
Are you currently seeing logs for this?
grep works for other id e.g. the teamviewer logger.
I have 2 WANs for months. This incident was the first time I saw incoming traffic to WAN2 and were logged.
As you can see from my rules, I don't have anything that will log incoming traffic for WAN2. -
Do you have UPnP enabled? Do you have it set to use WAN2, and to log connections?
That's the most likely explanation.
-
That would be my guess as well... You might be able to glean a bit more info by looking at the raw log in output.
-
When I manually trigger something like that (for example, open Deluge, go into settings, and trigger a port test), I get a similar log message with a random-ish ID.
Since the UPnP rules don't have a description, and have random IDs, and are probably short-lived, they wouldn't have a visible description in the logs even if you caught them when they were active.
-
@jimp said in Had my pfSense been compromised?:
Do you have UPnP enabled?
No I have not enabled UPnP.
-
That doesn't actually mean its not running - that is a wiget that can be edited to not show specific services.
-
@johnpoz
UPnP is not running:
