PPP-Connection with QMI/MBIM

[Daywalker91]

Hey there,

I have a small Network with an APU.2D4 with installed pfsense 2.4.4—p3 and for WAN i use an Huawei ME909s-120 mPCIe LTE Modul.

My problem is, it use only ppp with a bandwith limit of 20—25 mbit/s. So My Question is, is it planed to support QMI/MBIM for this Kind of Devices?

[stephenw10]

The best bet would be to get umb ported from OpenBSD to FreeBSD.

Adding it to pfSense would be relatively trivial at that point. Relatively.

There was a porting effort underway at one time but it died for some reason. I did clone the repo before it was nuked:
https://github.com/stephenw10/umb-freebsd

It was not far along.

Steve

[Daywalker91]

Thx for moving :-)

But umb doesn't Support ipv6, and i would like too use it too, But for the first it sounds great with that

[stephenw10]

Ha, one thing at a time!

I'll take any sort of non-ppp connection I can get right now. Failed to get much (any) traction so far. Only so many hours in the day for people who can do this I guess.

Steve

[Daywalker91]

No Problem, But i hope in some release later it is maybe support ;-)

And sorry for my bad englisch, its so long time ago that i write and speak so much english

[conor]

@Daywalker91 said in PPP-Connection with QMI/MBIM:

QMI

I looked into QMI, it appears to be an issue with getting the QMI SDK kit from Qualcomm, i think it relates to the open source nature of BSD.

Telit LE910 doesn't use PPP appears like a USB ethernet device with a separate serial interface. You have to write your own connection script to get it to connect.

I have a post with the commands here:
https://forum.netgate.com/topic/130748/telit-le910-cellular-modem-working-in-2-4-2

[Daywalker91]

Okay but at first i must change the config permanantly of my Modem

thats the output of usbconf

if i change the config manual from default (config 0) to config 1 i get an ethernet device but no usb ports for ppp etc