Connected to OpenVPN, but no network except for 1 IP Address

tocheeba

Yeah, that's what is weird. Different user names. Client log shows it connects just fine and gets DHCP. I feel like it's a routing issue of some sort, but everything looks setup correctly.

tocheeba

Sounds stupid, but on my LAN interface, it's setup as 192.168.1.1/24. I'm not limiting myself at all am I ? That's just configuring the IP of the pfSense box, right?

viragomann

For troubleshooting try to ping the LAN address 192.168.1.1.
This should work at least if the client routes are set correctly.
Then try to ping a LAN device.

tocheeba

Not able to ping either when connected as the 2nd VPN client (1921.68.2.3)

viragomann

So please post the clients IPv4 routing table.

marvosa

Post your server1.conf (/var/etc/openvpn).

tocheeba

I posted the IPv4 routing table above earlier, and you stated that it looked fine?

Here is the server1.conf files:

dev ovpns1
verb 1
dev-type tun
dev-node /dev/tun1
writepid /var/run/openvpn_server1.pid
#user nobody
#group nobody
script-security 3
daemon
keepalive 10 60
ping-timer-rem
persist-tun
persist-key
proto tcp-server
cipher AES-128-CBC
auth SHA256
up /usr/local/sbin/ovpn-linkup
down /usr/local/sbin/ovpn-linkdown
client-connect /usr/local/sbin/openvpn.attributes.sh
client-disconnect /usr/local/sbin/openvpn.attributes.sh
multihome
tls-server
server 192.168.2.0 255.255.255.0
client-config-dir /var/etc/openvpn-csc/server1
username-as-common-name
plugin /usr/local/lib/openvpn/plugins/openvpn-plugin-auth-script.so /usr/local/sbin/ovpn_auth_verify_async user TG9jYWwgRGF0YWJhc2U= false server1 1195
tls-verify "/usr/local/sbin/ovpn_auth_verify tls 'OpenVPN+Server+Certificate' 1"
lport 1195
management /var/etc/openvpn/server1.sock unix
push "route 192.168.2.0 255.255.255.0"
push "route 192.168.1.0 255.255.255.0"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 4.4.4.4"
duplicate-cn
ca /var/etc/openvpn/server1.ca
cert /var/etc/openvpn/server1.cert
key /var/etc/openvpn/server1.key
dh /etc/dh-parameters.2048
tls-auth /var/etc/openvpn/server1.tls-auth 0
ncp-ciphers AES-128-GCM
persist-remote-ip
float
topology subnet
~
~
~
~
~
~
~
~

marvosa

A couple things I see:

The tunnel network is being pushed out to your clients as a route to a remote network, which is incorrect. Remove "192.168.2.0/24" from the IPv4 Local network(s) line.
Considering this is a routed, split-tunnel deployment, why push public DNS servers?

Another thing to watch out for is... in a routed solution, the LAN subnets have to be unique across both ends. So, in your situation, any client that's connecting from a LAN subnet of either 192.168.1.0/24 or 192.168.2.0/24 will break the routing to the tunnel.

On the server-side, ideally, you will want to move away from popular subnets used by common SOHO routers (192.168.1.0/24, 192.168.2.0/24, etc) on both the LAN and the tunnel network.

Pippin

This post is deleted!

tocheeba

@marvosa Thanks. I removed the DNS and removed the 192.168.2.0/24 from local network line. Connected again just fine on the client, but still can't connect to anything. The network I'm on right now is using a 10.x.x.x scheme. I'm pulling my hair out trying to figure out wtf the problem is.

marvosa

Post new screenshots of both the client's routing table when connected and PFsense.