Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    GUI Showing LAN is Down But Everything Seems to be Working

    webGUI
    3
    6
    605
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      theryno
      last edited by

      So I have the XG-7100u and was using the eth2 port as the LAN (default) and everything was showing correctly on the web interface (that the LAN port was up). I decided to upgrade my network to 10Gig and got a Ubiquity 16-XG switch. I used the ix1 port (SFP+) on the 7100 as the LAN that then goes to the new 16-XG. After doing my config on pfsense to get the ix1 port as the LAN everything started working. However when I go to the status of the LAN port its showing that its down even though everything is working correctly. I just wanted to make sure I wasnt missing something or if this is just a bug?tempsnip.png Capture.PNG

      viktor_gV 1 Reply Last reply Reply Quote 0
      • viktor_gV
        viktor_g Netgate @theryno
        last edited by

        @theryno what is your pfSense version?
        Same result after reboot?

        Please show us 'ifconfig -vma' output

        1 Reply Last reply Reply Quote 0
        • T
          theryno
          last edited by

          @viktor_g said in GUI Showing LAN is Down But Everything Seems to be Working:

          ifconfig -vma

          Yes, I rebooted and got the same result.
          Version : 2.4.4-RELEASE-p3 (amd64)
          built on Thu May 16 06:01:19 EDT 2019
          FreeBSD 11.2-RELEASE-p10

          ifconfig -vma output :

          ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
          options=e400bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=f507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
          ether 00:08:a2:0e:f9:c4
          hwaddr 00:08:a2:0e:f9:c4
          inet6 fe80::208:a2ff:fe0e:f9c4%ix0 prefixlen 64 scopeid 0x1
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          media: Ethernet autoselect
          status: no carrier
          supported media:
          media autoselect
          ix1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
          options=e400bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=f507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
          ether 00:08:a2:0e:f9:c5
          hwaddr 00:08:a2:0e:f9:c5
          inet6 fe80::208:a2ff:fe0e:f9c5%ix1 prefixlen 64 scopeid 0x2
          inet 192.168.50.1 netmask 0xffffff00 broadcast 192.168.50.255
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          media: Ethernet autoselect (10Gbase-SR <full-duplex,rxpause,txpause>)
          status: active
          supported media:
          media autoselect
          media 10Gbase-SR
          plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
          vendor: UBNT PN: UF-MM-10G SN: FT18112321839 DATE: 2018-11-23
          module temperature: 34.25 C Voltage: 3.26 Volts
          RX: 0.47 mW (-3.27 dBm) TX: 0.59 mW (-2.26 dBm)
          ix2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
          options=e500bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=f507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
          ether 00:08:a2:0e:f9:c6
          hwaddr 00:08:a2:0e:f9:c6
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          media: Ethernet autoselect (2500Base-KX <full-duplex,rxpause,txpause>)
          status: active
          supported media:
          media autoselect
          media 2500Base-KX
          ix3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
          options=e500bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=f507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
          ether 00:08:a2:0e:f9:c6
          hwaddr 00:08:a2:0e:f9:c7
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          media: Ethernet autoselect (2500Base-KX <full-duplex,rxpause,txpause>)
          status: active
          supported media:
          media autoselect
          media 2500Base-KX
          enc0: flags=0<> metric 0 mtu 1536
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          groups: enc
          lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
          options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
          inet6 ::1 prefixlen 128
          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x10
          inet 127.0.0.1 netmask 0xff000000
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          groups: lo
          pflog0: flags=100<PROMISC> metric 0 mtu 33160
          groups: pflog
          pfsync0: flags=0<> metric 0 mtu 1500
          groups: pfsync
          syncpeer: 224.0.0.240 maxupd: 128 defer: on
          syncok: 1
          lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
          options=e500bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=f507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
          ether 00:08:a2:0e:f9:c6
          inet6 fe80::208:a2ff:fe0e:f9c6%lagg0 prefixlen 64 scopeid 0x13
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          media: Ethernet autoselect
          status: active
          supported media:
          media autoselect
          groups: lagg
          laggproto loadbalance lagghash l2,l3,l4
          lagg options:
          flags=0<>
          flowid_shift: 16
          lagg statistics:
          active ports: 2
          flapping: 0
          laggport: ix2 flags=4<ACTIVE>
          laggport: ix3 flags=4<ACTIVE>
          lagg0.4090: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
          options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
          ether 00:08:a2:0e:f9:c6
          inet6 fe80::208:a2ff:fe0e:f9c6%lagg0.4090 prefixlen 64 scopeid 0x14
          inet 192.69.181.16 netmask 0xffffffc0 broadcast 192.69.181.63
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          media: Ethernet autoselect
          status: active
          supported media:
          media autoselect
          vlan: 4090 vlanpcp: 0 parent interface: lagg0
          groups: vlan
          lagg0.4091: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
          options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
          capabilities=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
          ether 00:08:a2:0e:f9:c6
          inet6 fe80::208:a2ff:fe0e:f9c6%lagg0.4091 prefixlen 64 scopeid 0x15
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          media: Ethernet autoselect
          status: active
          supported media:
          media autoselect
          vlan: 4091 vlanpcp: 0 parent interface: lagg0
          groups: vlan
          ovpns1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
          options=80000<LINKSTATE>
          capabilities=80000<LINKSTATE>
          inet6 fe80::208:a2ff:fe0e:f9c4%ovpns1 prefixlen 64 scopeid 0x16
          inet 192.168.12.1 --> 192.168.12.2 netmask 0xffffff00
          nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
          groups: tun openvpn
          Opened by PID 40233

          1 Reply Last reply Reply Quote 0
          • T
            theryno
            last edited by

            Any idea whats going on here? Now for some reason my LAN graph doesn't show up on my dashboard...just the WAN graph. Oddly, all is still functioning normal as far as I can tell. Still very strange behavior.

            GertjanG 1 Reply Last reply Reply Quote 0
            • GertjanG
              Gertjan @theryno
              last edited by

              @theryno said in GUI Showing LAN is Down But Everything Seems to be Working:

              for some reason my LAN graph doesn't show up on my dashboard.

              According to yourself, this is normal :

              33b00939-8829-4526-a713-16cb4f1c51d6-image.png

              No "help me" PM's please. Use the forum, the community will thank you.
              Edit : and where are the logs ??

              1 Reply Last reply Reply Quote 0
              • T
                theryno
                last edited by

                Yes, only when I changed to the SFP+ port. When I was using the rj45 port it showed the LAN as being "UP".

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.