OpenVPN client for specific devices on the LAN only?
-
I'm setting up a pfsense OpenVPN client as a site to site connection from my home LAN to a remote lan for only certain devices, namely VOIP phones and a mail server (by default all traffic gets routed through the OpenVPN client - I only need to route certain devices through VPN).
One of the main reasons for doing this is my home ISP has a dynamic address and blocks outgoing port 25 while the remote LAN has a static IP and allows SMTP traffic. I would also like to set up QOS prioritize VOIP traffic within the OpenVPN link.
How can I associate the OpenVPN client to a separate gateway IP and/or separate VLAN in pfsense to make this happen?
-
You should be able to create a rule & route to send the SMTP traffic out the VPN. However, my question is why are you using port 25? There are better ports that the ISPs allow. For example, I use port 587 for STARTTLS.
-
@JKnott My understanding is not all mail hosts accept port 587 connections.
-
Give it a try and see what happens. As I said, many ISPs block 25 but not the other ports.
-
Thanks. Still hoping for any guidance on the original question.