TLD issues/questions....
-
OK question, is there a way to see the lists i checked, how many per list i select, there are in the said list?
Is there a site/sites per list to check the amount of blocked sites/domains?
-
@whizatit said in TLD issues/questions....:
Can't retrieve/post logs if system freezes :-(
I cant even log into the GUI/on the box itself it just locks up entirely!Can you access the box using the Console or SSH ?
From there you can inspect the logs. -
@RonpfS nope totally locked up not even serial just shows gibberish.
-
@whizatit And when it boot does it only show gibberish?
-
@RonpfS after post it takes about 5 seconds then it's locked up
-
I guess it's time to start over without pfblocker to see if the system is stable.
-
System is stable always until TLD is enabled reload or not.
-
Post some debug info here then we can see what is going on.
What others package are you using ? What pfsense version? What is your DNS services setting? What is your network configuration?
Before enabling pfblockerNG, inspect the system logs, resolver logs, pfblockerng logs to see if something is broken.
Then enable only pfblockerNG , DNSBL disabled, inspect the pfblockerng logs during a Force Update and Force Reload All.
Enable DNSBL without TLD, with only one DNSBL group enabled, enabling more until something break.
Inspect the logs, how many domains are used etc.
-
@whizatit I find it baffling that you installed a clean new copy of pfSense that works, then you added pfBlockerNG-dev and still worked, then you configured your list and checked TLD, force reloaded/update pfBlockerNG-dev and system freezes...it's not making sense...unless you have a hardware issue; and the suspect is RAM. However, you said RAM checked out good!
-
Also :
@whizatit said in TLD issues/questions....:
Can't retrieve/post logs if system freezes :-(
That why logs shouldn't stay on the router.
You have to 'backup' your logs. Because: if you have them, you wont need them - and the other way around.I've TLD selected since the beginning on a very old plain vanilla "Intel(R) Pentium(R) 4 CPU 3.20GHz
2 CPUs: 1 package(s) x 2 hardware threads " with 2 GB.
Four or five classic feeds ( DNSBL ).Here you can see memory and system resources (yep, another way to 'log' outside the box).
pfSense freezes ? I don't recall freezing mine on me ...
