Suricata is blocking LAN and WAN IPs

[bmeeks]

You should also check in the suricata.log file to see if any kinds of errors are being posted. Might be that something is corrupt in your default pass list. You can view the log files for an interface by going to the LOGS VIEW tab.

Note that the suricata.log file is overwritten each time Suricata starts, so to catch an error you will need to look at the file before restarting Suricata.

[zachtywebb]

@bmeeks After a fresh install and completely setting everything back up, I am still seeing pass list and home net IPs getting blocked. Here is my suricata.log file if it helps, but I'm not seeing anything concerning. suricata.log.txt

[zachtywebb]

@bmeeks Here is a line item from the block log from one of these instances:

02/07/2020-14:17:02.668595 [Block Src] [] [1:2007994:21] ET INFO Suspicious User-Agent (1 space) [] [Classification: Unknown Traffic] [Priority: 3] {TCP} 192.168.1.139:55537
02/07/2020-14:17:02.668595 [Block Dst] [] [1:2007994:21] ET INFO Suspicious User-Agent (1 space) [] [Classification: Unknown Traffic] [Priority: 3] {TCP} 172.217.3.195:80

And here is the corresponding line item from the http log:

02/07/2020-14:17:02.668595 connectivitycheck.gstatic.com[]/generate_204[][]<no referer>[]HEAD[]HTTP/1.1[]204[]0 bytes[]192.168.1.139:55537 -> 172.217.3.195:80

[bmeeks]

Post up what your default pass list contains. You can view and copy/paste its contents by going to the INTERFACE SETTINGS tab for an interface and clicking the View button beside the Pass List drop-down selector towards the bottom of the page.

Suricata's internal pass list engine for the firewall interfaces appears to be working properly as evidenced by these lines from suricata.log showing the firewall's interface IP addresses being added to the internal automatic pass list.

7/2/2020 -- 13:52:30 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:30 - <Info> -- alert-pf -> deleted address 192.168.1.1 from automatic firewall interface IP Pass List.
7/2/2020 -- 13:52:30 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:30 - <Info> -- alert-pf -> deleted address 10.10.10.1 from automatic firewall interface IP Pass List.
7/2/2020 -- 13:52:34 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:34 - <Info> -- alert-pf -> added address 192.168.1.1 to automatic firewall interface IP Pass List.
7/2/2020 -- 13:52:34 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:34 - <Info> -- alert-pf -> added address 10.10.10.1 to automatic firewall interface IP Pass List.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> deleted address 192.168.1.1 from automatic firewall interface IP Pass List.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> deleted address 10.10.10.1 from automatic firewall interface IP Pass List.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> added address 192.168.1.1 to automatic firewall interface IP Pass List.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> Received notification of IP address change on interface em0.
7/2/2020 -- 13:52:39 - <Info> -- alert-pf -> added address 10.10.10.1 to automatic firewall interface IP Pass List.

You should see the network for your LAN listed in the default pass list (for example, 192.168.1.0/24 or something similar). Do you see that?

BTW, it is curious that in the suricata.log you can see this parsing of firewall interfaces happening twice. It's like your interfaces bounced again as Suricata was starting. What's up with that? The engine monitors the firewall interface IPs using a subscription to pfSense (FreeBSD) routing messages.

[zachtywebb]

@bmeeks I do see that listed. Below is what is in my default pass list:

10.10.10.1/32
192.168.0.0/24
192.168.1.0/24
xxx.xxx.240.1/32
xxx.xxx.243.208/32
127.0.0.1/32
2001:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:e430/128
2601:xxxx:xxxx:xxxx::/64
::1/128
fe80::1/128
fe80::1:1/128
fe80::xxxx:xxxx:xxxx:a244/128

I saw the interface parsing twice as well and thought that was weird, but wasn't really sure if that was an issue or not. As far as I'm aware my interfaces didn't bounce.

[bmeeks]

The logs you posted are all for physical interface em0. Are there any VLANs defined on that interface or just a single LAN?

Also, have you verified that the IP address 192.168.1.139 is showing on the BLOCKS tab?

I'm thinking it must be something within your configuration because if this were a widespread problem I would expect to see a lot of posts recently about this.

[zachtywebb]

@bmeeks There are no defined VLANs; just a single LAN. And yes, I see the 192.168.1.139 IP listed on the block tab and can confirm it does in fact stop working once placed on the block tab.

I am not willing to retest at the moment, but the configuration on my WAN interface was blocking my external WAN IPv4 address causing my entire internet to get blocked, which is how I stumbled into this gem of an issue. Took me a while to track down what was causing my internet to not work. The only thing that has changed recently is that I updated the Suricata package 2 days before I stumbled into the WAN IP being blocked.

[bmeeks]

I am unable to reproduce your problem. Here is a test I did using a pfSense virtual machine running the current Suricata-4.1.6_3 package.

I have a Kali Linux virtual machine on the same network as the pfSense VM. I used nmap on the Kali Linux machine to scan the WAN IP address of the pfSense virtual machine. That WAN IP is 192.168.10.21 in the images that follow. 192.168.10.23 is the Kali Linux virtual machine.

Here are the alerts on the WAN interface from pfSense that resulted from the Kali Linux scan:

And here are the results from the BLOCKS tab showing the Kali Linux host being blocked but not the pfSense firewall's WAN IP.

And finally, here is the Default Pass List existing on the pfSense virtual machine. Notice the WAN IP is listed and that IP is not blocked in the scan alerts while the IP of the Kali Linux malicious host is blocked. Everything is working as designed on my end.

[zachtywebb]

@bmeeks Alright, well I guess at least it's for sure not an issue with the update. I am out of ideas at the moment, but will keep poking at it. Thanks for all your help.

[bmeeks]

@zachtywebb said in Suricata is blocking LAN and WAN IPs:

@bmeeks Alright, well I guess at least it's for sure not an issue with the update. I am out of ideas at the moment, but will keep poking at it. Thanks for all your help.

Those extra lines in your suricata.log file about adding the firewall interface IPs to the automatic internal pass list are strange. Normally those lines should appear just once in the log unless an interface IP changes sometime later after startup has completed. Usually that only happens due to a DHCP release/renew cycle or a PPPoE connection dropping and then being re-established.

When Suricata starts, the custom blocking plugin on pfSense grabs all the existing firewall interface IP addresses and puts them in the internal automatic pass list. It also subscribes to kernel routing messages so that it can see any future interface IP changes. So that first set of log messages about adding IP addresses to the automatic internal pass list are expected and normal.

In your log, however, there is another cycle interface IPs being removed and then added back just a second or two after the initial startup scan was completed. That is unusual. I would focus my investigations there to determine why that is happening. What is making your interfaces essentially come up and then go down and then come up again with a few seconds?

[zachtywebb]

@bmeeks So, I did find this line in my pfBlockerNG IP block log and I do have kill states enabled on there. Not sure if this is related but the timestamp on this is directly between the initial start of Suricata in the previous log and the interface reset. This is on the WAN so it would be weird for it to be the cause of the LAN (em0) to bounce.

Feb 7 13:52:17,1770007928,igb0,WAN,block,4,6,TCP-S,194.26.69.105,xxx.xxx.243.208,58964,2431,in,RU,pfB_Top_v4,194.26.69.0/24,pfB_Top_v4,Unknown,wan,null,+

[zachtywebb]

@bmeeks I may have figured this one out. Not sure how this issue just popped up but I saw another of your posts where something similar was happening to someone else and I checked some settings that you had suggested and I had not disabled hardware checksum offloading. After doing this and rebooting I am not seeing home net or pass list IPs being blocked. I will keep an eye on it but so far this seems to have done the trick.

[bmeeks]

@zachtywebb said in Suricata is blocking LAN and WAN IPs:

@bmeeks I may have figured this one out. Not sure how this issue just popped up but I saw another of your posts where something similar was happening to someone else and I checked some settings that you had suggested and I had not disabled hardware checksum offloading. After doing this and rebooting I am not seeing home net or pass list IPs being blocked. I will keep an eye on it but so far this seems to have done the trick.

That's strange. Glad it's working for you now, but I would not have expected that to make a difference in blocking HOME_NET or not blocking it.

[zachtywebb]

@bmeeks Yeah, I was thinking the same thing and was expecting it to not work, but at that point I was grasping at straws. I am still not convinced that was the root cause, but I am no longer showing the duplicate weirdness in the Suricata logs and none of the pass list IPs are being blocked. What I am thinking actually happened is whatever was making Suricata upset finally cleared on this most recent reboot.

[xm4rcell0x]

I have the exact same problem. Suricata blocks my LAN IPs.
With SNORT i don't have this strange problem and i don't know why.
Already tried to reboot, to stop suricata on each interface and check for zombies processes but nothing.
I have a setup with legacy blocking and Block on Drop only (even without block on drop only i have this problem) and i have VLAN on ix0 interface (but i only have the lan in suricata) . I really don't know what to do .

Here my default passlist and the suricata.log and block.log

10.10.10.1/32
10.10.20.0/24
10.10.20.254/32
10.39.156.0/25
WANIP/32
127.0.0.1/32
172.168.69.0/24
192.168.1.0/24
192.168.57.0/24
192.168.70.0/24
192.168.100.0/24
195.43.166.12/32
::1/128
fe80::92e2:baff:fe4c:c1b4/128
fe80::e9d:92ff:fe5b:cab5/128
fe80::e9d:92ff:fe5b:cab6/128

suricata.log alerts.log blocks.log

P.s. i don't find any similar type of logs in snort, maybe it could

[xm4rcell0x]

That's a newer suricata.log.lan made after a fresh install of suricata.

Update: just set up the wan on suricata with legacy block-block on drop only-block both SRC&DST and with this interface i don't have problems with passlist! It blocks only the external IPs!
suricata.log.wan

[bmeeks]

@xm4rcell0x said in Suricata is blocking LAN and WAN IPs:

I have the exact same problem. Suricata blocks my LAN IPs.
With SNORT i don't have this strange problem and i don't know why.
Already tried to reboot, to stop suricata on each interface and check for zombies processes but nothing.
I have a setup with legacy blocking and Block on Drop only (even without block on drop only i have this problem) and i have VLAN on ix0 interface (but i only have the lan in suricata) . I really don't know what to do .

Here my default passlist and the suricata.log and block.log

10.10.10.1/32
10.10.20.0/24
10.10.20.254/32
10.39.156.0/25
WANIP/32
127.0.0.1/32
172.168.69.0/24
192.168.1.0/24
192.168.57.0/24
192.168.70.0/24
192.168.100.0/24
195.43.166.12/32
::1/128
fe80::92e2:baff:fe4c:c1b4/128
fe80::e9d:92ff:fe5b:cab5/128
fe80::e9d:92ff:fe5b:cab6/128

suricata.log alerts.log blocks.log

P.s. i don't find any similar type of logs in snort, maybe it could

From the suricata.log file accompanying your post --

30/9/2021 -- 10:36:16 - <Info> -- alert-pf -> Pass List /usr/local/etc/suricata/suricata_13894_ix0/passlist parsed: 0 IP addresses loaded.

So Suricata did not load any local IP addresses into the passlist. Notice the "0 IP addresses loaded" part. The other entries in the log where it mentions "automatic IP interface Pass List" are not the same thing. Those are actual firewall interface IPs. The regular Pass List is where LAN hosts would reside.

So in this instance, blocking of local LAN hosts would certainly occur.

[bmeeks]

@xm4rcell0x said in Suricata is blocking LAN and WAN IPs:

That's a newer suricata.log.lan made after a fresh install of suricata.

Update: just set up the wan on suricata with legacy block-block on drop only-block both SRC&DST and with this interface i don't have problems with passlist! It blocks only the external IPs!
suricata.log.wan

Now look at the suricata.log file where it tells you how many IP addresses it loaded from the passed Pass List file:

30/9/2021 -- 14:45:47 - <Info> -- alert-pf -> Pass List /usr/local/etc/suricata/suricata_57062_ix0/passlist parsed: 16 IP addresses loaded.

There it found and loaded 16 IP addresses and/or subnets.

[xm4rcell0x]

@bmeeks yes :)
But Suricata still blocks internal IPs on this interface and i really don't know why
On WAN no problems.

[bmeeks]

@xm4rcell0x said in Suricata is blocking LAN and WAN IPs:

@bmeeks yes :)
But Suricata still blocks internal IPs on this interface and i really don't know why
On WAN no problems.

Are you running VLANs on that interface? If so, what are all of the VLAN subnets defined on that interface?

Also post the content of this file: /usr/local/etc/suricata/suricata_57062_ix0/passlist back here.